SFP-25G-SR-S
SAVE $1,039.15
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$7,400.00
$868.3588.3% off
Quantity:
C9300X-NM-8Y
Cisco C9300X-NM-8Y 8-Port 25G/10G/1G SFP28 Network Module fo...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9300X-NM-8Y is the Catalyst 9300X 8x 25G/10G/1G Network Module, a Cisco network module with eight SFP28 uplink ports for Catalyst 9300X switches. 25G per SFP28 port is the edge over C9300X-NM-8M. Catalyst 9300X-48HXN uses six ports on Cisco IOS XE Cupertino 17.8.1 and later. The Cisco Catalyst 9300X network module fits C9300X-12Y, C9300X-24Y, C9300X-24HX, C9300X-48HX, C9300X-48TX and C9300X-48HXN. Catalyst 9300 and Catalyst 9300L do not take this C9300X module. The front uplink network module slot takes one module or C9300X-NM-BLANK. Order Cisco pluggable transceivers for the fiber or DAC handoff, and match the far end to 1 Gbps, 10 Gbps or 25 Gbps.
C9300X-NM-8Y price for new stock is $924.00, a 87.5% saving from the Cisco list price of $7,400.00. C9300X-NM-8Y refurb price is $868.35. C9300X-NM-8Y is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9300X-NM-8Y for additional pricing. Browse the full Cisco C9300-NM Catalyst Network Modules series or explore all Cisco products.
TwentyFiveGigE1/1/1 through TwentyFiveGigE1/1/8 are the configured interfaces on the module. One front uplink network module slot sits on each Catalyst 9300X member, so a fully equipped nine-member stack takes nine modules. C9300X-NM-8Y is hot-swappable, and online insertion and removal requires a 6-8 second wait between removal and insertion. Cisco IOS XE Bengaluru 17.5.1 is the first supported release. Catalyst 9300X-48HXN uses ports 1 to 6 on Cisco IOS XE Cupertino 17.8.1 and later; ports 7 and 8 are permanently disabled on that model. A blank module stays in any unused uplink slot for airflow, EMC, safety and thermal requirements. Cisco pluggable transceivers install after the module seats in the slot.
C9300X-NM-8Y is offered new sealed and certified refurbished. Certified refurbished units have connectors, cages, latch and faceplate inspected, optics bay recognition, and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 9300X model, the free front uplink network module slot, Cisco IOS XE Bengaluru 17.5.1, and Cisco transceivers. Regional stock/RMA covers UK, EU, US and MEA, with RMA with advance replacement, PO accepted and Net-30 for government. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition · terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 8 x 25G/10G/1G SFP28 |
Fits | Catalyst 9300X |
Module Features | 25G SFP28 uplinks / Hot swap |
Slot | Front uplink network module slot |
Minimum Software | Cisco IOS XE Bengaluru 17.5.1 |
Ships Without | Cisco pluggable transceivers |
C9300X-NM-8Y operates in the Catalyst 9300X uplink bay when access switches hand traffic toward distribution or aggregation switches over fiber. The eight SFP28 ports let engineers assign separate 25G, 10G, or 1G uplinks for stack members, redundant paths, or phased optic replacement. Link design stays tied to the C9300X host model and Cisco IOS XE release, especially on C9300X-48HXN switches with port-usage limits. The result is a cleaner access-to-distribution handoff with documented uplink density and fewer module mismatches during refreshes.
C9300X-NM-8Y supports a repeatable uplink standard across Catalyst 9300X switch stacks where each stack uses the same front-bay module, interface naming pattern, and transceiver plan. Network teams map TwentyFiveGigE1/1/1 through TwentyFiveGigE1/1/8 into templates, then reserve specific ports for redundant upstream links or migration links. The proprietary C9300X module slot keeps procurement tied to the approved host family instead of a generic adapter. Compatible chassis testing confirms the bay, latch, and SFP cages before deployment, reducing staging errors across the switch estate.
Mixed-speed migration planning uses C9300X-NM-8Y when a Catalyst 9300X access layer still carries 1G or 10G optics while new uplink designs move selected paths to 25G. Engineers keep the same eight-position module and change the supported Cisco transceiver or cable as the upstream port speed changes. The module suits staged refreshes because the physical slot remains constant while link speeds move by port. This approach limits hardware churn, preserves operational naming, and gives the network a controlled path from legacy uplinks to higher bandwidth.
The buyer has a failed eight-port uplink module in a Catalyst 9300X switch. The replacement must match the C9300X network module slot and the running Cisco IOS XE release. Count one module for each affected switch member, and keep C9300X-NM-BLANK in any empty uplink slot before the PO.
The buyer is adding 25 Gbps fiber uplinks to a Catalyst 9300X access stack. Each active port needs a Cisco SFP28 transceiver or DAC, and the far end must match 25 Gbps, 10 Gbps or 1 Gbps. Count eight optics per fully used module before the PO.
The buyer wants the same uplink module across multiple Catalyst 9300X stack members. A Catalyst 9300X stack has a maximum of nine members, and each uplinking member takes one front network module. Count the members that need external uplinks and the transceivers for the active ports before the PO.
Catalyst 9300 non-X switches
Catalyst 9300 switches take C9300-NM-2Y for 25G uplinks; Catalyst 9300L has fixed uplinks. C9300X network modules fit only Catalyst 9300X models.
100G QSFP uplinks
C9300X-NM-8Y reaches 25 Gbps per SFP28 port. Use C9300X-NM-2C when the Catalyst 9300X design needs 100G/40G QSFP+ module slots.
All eight HXN uplinks
Catalyst 9300X-48HXN uses ports 1 to 6 on Cisco IOS XE Cupertino 17.8.1 and later; ports 7 and 8 are permanently disabled.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Module | Line Card | Supervisor/CPU Module | SSD |
| Data Rate | 25G | 1G | 40Gbps | SATA III 6Gbps |
| Form Factor | Plug-in Module | Full Slot | Modular | Modular |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 6 February 2020
C9300X-NM-8Y matched our Catalyst 9300X refresh plan and gave the uplink density our network team needed without changing chassis standards.
Reviewed on the 16 October 2020
The module arrived clean, tested, and ready for staging. Eight multi-rate SFP28 ports made our 10G to 25G migration easier to plan.
Reviewed on the 26 September 2024
Good fit for our 9300X switch estate. The SKU-specific details helped procurement avoid ordering the wrong Catalyst network module.
Reviewed on the 30 September 2017
C9300X-NM-8Y performed as expected in the uplink bay. Interface recognition and fiber handoff testing were straightforward during deployment.
Reviewed on the 5 April 2025
Reliable option for standardizing 25G uplinks across our Catalyst 9300X access layer. The refurbished unit passed staging without issues.
Reviewed on the 19 June 2025
The module helped us keep spare inventory aligned with approved Cisco hardware. Documentation around compatibility and port limits was useful.
C9300X-NM-8Y is the Cisco Catalyst 9300X 8 x 25G/10G/1G multi-rate SFP Network Module. It adds eight SFP28 uplink ports to Catalyst 9300X switches. C9300X identifies the 9300X host, NM means network module, and 8Y marks eight 25G/10G/1G SFP28 ports.
C9300X-NM-8Y fits Catalyst 9300X C9300X-12Y, C9300X-24Y, C9300X-24HX, C9300X-48HX, C9300X-48TX and C9300X-48HXN switches. Catalyst 9300 and Catalyst 9300L do not take it; Catalyst 9300 takes C9300-NM-2Y for 25G uplinks, and Catalyst 9300L has fixed uplinks.
A Catalyst 9300X uses C9300X-NM-8Y for eight 25G/10G/1G SFP28 ports. Other C9300X network modules in the same host table are C9300X-NM-8M, C9300X-NM-2C and C9300X-NM-4C. A blank C9300X-NM-BLANK fills the slot when no uplink ports are required.
C9300X-NM-8Y has eight SFP28 ports rated for 25 GE, 10 GE and 1 GE. The far end must match the selected Ethernet speed. The configured interfaces are TwentyFiveGigE1/1/1 through TwentyFiveGigE1/1/8 on a normal Catalyst 9300X switch.
C9300X-NM-8Y uses Cisco pluggable transceivers or cables in its SFP28 ports at 1G, 10G and 25G speeds. Transceivers and cables are separate line items. Count one Cisco transceiver or DAC for every active port. The far end must match the selected port speed.
C9300X-NM-8Y takes the front uplink network module slot in a Catalyst 9300X switch. Each uplinking switch member takes one module. The network module is hot-swappable, and an empty uplink slot takes C9300X-NM-BLANK for airflow, EMC, safety and thermal requirements. Remove installed transceivers first.
C9300X-NM-8Y gives Catalyst 9300X switches eight modular SFP28 uplink ports, with 25G per port as the edge over the 10G C9300X-NM-8M copper module. The module is hot-swappable, and the switch logs insertion or removal of network modules with SFP/SFP+/SFP28 slots.
C9300X-NM-8Y first runs on Cisco IOS XE Bengaluru 17.5.1. Catalyst 9300X models with later introductory releases need their own host floor as well. Catalyst 9300X-48HXN uses only ports 1 to 6 on Cisco IOS XE Cupertino 17.8.1 and later. Ports 7 and 8 stay permanently disabled on that model.
Catalyst 9300X-48HXN uses ports 1 to 6 with C9300X-NM-8Y on Cisco IOS XE Cupertino 17.8.1 and later, and ports 7 and 8 stay permanently disabled. On Cisco IOS XE Cupertino 17.7.1 and previous releases, ports 1 to 4 are usable only.
C9300X-NM-8Y provides eight 25G/10G/1G SFP28 uplinks, while C9300X-NM-8M provides eight Multigigabit Ethernet copper module slots. Choose C9300X-NM-8Y for fiber or DAC uplinks at 25G, and choose C9300X-NM-8M when the Catalyst 9300X build needs copper mGig uplinks.
C9300X-NM-8Y provides eight 25G/10G/1G SFP28 ports, while C9300X-NM-2C provides two 100G/40G QSFP+ slots. Choose C9300X-NM-8Y when the design needs more SFP28 uplink ports, and choose C9300X-NM-2C when the Catalyst 9300X build needs 100G or 40G uplinks.
Cisco has not announced an end-of-sale date for C9300X-NM-8Y. The module serves Catalyst 9300X C9300X-12Y, C9300X-24Y, C9300X-24HX, C9300X-48HX, C9300X-48TX and C9300X-48HXN switches, and Cisco IOS XE Bengaluru 17.5.1 is its first supported release.
ORM offers C9300X-NM-8Y new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host. Cisco Enhanced Limited Lifetime hardware warranty applies to Cisco hardware; ORM warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30-day returns.