GLC-TE
SAVE $570.84
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$682.27
$73.4989.2% off
Quantity:
C9300-NM-4G
Cisco C9300-NM-4G 4-Port 1G SFP Network Module for Catalyst...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9300-NM-4G is a Cisco Catalyst 9300 4 x 1GE SFP Network Module with four 1G SFP uplink slots for Catalyst 9300 switches. Four standard 1G SFP slots are its edge. It fits C9300 SKUs and does not fit Catalyst 9300X or Catalyst 9300L models. A Cisco Catalyst 9300 network module occupies the front uplink module slot and uses standard SFP modules for fiber or 1000BASE-T SFP handoffs. The C9300-NM-4M keeps the same four-port count but changes the bay to four Multigigabit Ethernet interfaces, so match fiber SFP uplinks before the PO. A stack takes them member by member, not as a shared chassis resource.
C9300-NM-4G price for new stock is $212.10, a 68.9% saving from the Cisco list price of $682.27. C9300-NM-4G refurb price is $73.49. C9300-NM-4G is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9300-NM-4G for additional pricing. Browse the full Cisco C9300-NM Catalyst Network Modules series or explore all Cisco products.
1 Gbps per port is the operating rate, and SFP+ modules do not operate in this 1G network module. The valid interfaces are GigabitEthernet1/1/1 through GigabitEthernet1/1/4; TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/4 entries must be disregarded. C9300-NM-4G is hot-swappable, and OIR events need a 6-8 second wait between removal and insertion. Cisco IOS XE Everest 16.5.1a is the introductory release for the module; Catalyst 9300 1G fiber models need Cisco IOS XE Release 16.11.1a or later. The host must have a network module or a blank installed for EMC, safety and thermal compliance. Remove cables and transceivers before installation or removal, and configure the GigabitEthernet interfaces only.
Order C9300-NM-4G new sealed or certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; optics bay recognition verified; every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 9300 SKU, free uplink slot, Cisco IOS XE release and one SFP per active port. UK, EU, US and MEA stock, RMA with advance replacement, PO accepted and Net-30 for government apply. New units carry up to 3-year extended warranty, certified refurbished up to 1 year, and returns are 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x 1GE SFP |
Fits | Catalyst 9300 |
Module Features | Standard 1G SFP slots; no SFP+ operation |
Slot | Uplink module slot; one per switch |
Hot Swap | Yes; wait 6-8 seconds for OIR |
Minimum Software | Cisco IOS XE Everest 16.5.1a |
C9300-NM-4G sits in the modular uplink slot of a compatible Catalyst 9300 access switch and presents four 1G Gigabit Ethernet interfaces northbound. Engineers map those interfaces to distribution trunks, routed uplinks, or EtherChannel bundles according to the campus design. The module keeps fixed endpoint ports separate from upstream handoff planning, which simplifies access-layer refreshes where 1G distribution links remain in service. The result is a Catalyst 9300 access block with defined Gigabit uplink capacity and cleaner separation between endpoint access and distribution connectivity.
In a Catalyst 9300 stack, C9300-NM-4G provides four 1G uplink ports from the installed switch member into the wider distribution layer. Network teams assign the module interfaces to redundant uplink paths, trunk groups, or routed links while StackWise keeps the access block under one management plane. The four-port layout supports separate uplinks for resilience, traffic segmentation, or staged migration. The result is a stacked access design with controlled Gigabit handoff points and less dependence on fixed front-panel access ports.
The module supports Catalyst 9300 deployments that refresh the access switch while preserving existing 1G distribution connectivity. Engineers install C9300-NM-4G in the new access switch, reconnect established Gigabit uplinks, and then migrate VLAN trunks, routed interfaces, or EtherChannel settings onto the replacement platform. This role matters where upstream distribution switches, fiber paths, or patching standards remain built around 1G links. The result is an access-layer hardware upgrade that keeps the current distribution handoff intact during a controlled migration.
A Catalyst 9300 stack member has a failed 1G SFP uplink module and the installed uplinks must remain at 1 Gbps. C9300-NM-4G returns four GigabitEthernet1/1/1 to GigabitEthernet1/1/4 interfaces in that member. Count one network module per affected switch and remove optics before the PO.
A mixed Catalyst 9300 stack needs the same four-port 1G SFP uplink layout on selected C9300 members. Each selected switch takes one network module in its uplink module slot. Count four SFP transceivers per populated module and match Cisco IOS XE Everest 16.5.1a or later.
A staging rack needs a Catalyst 9300 with modular 1G SFP uplinks for fiber or 1000BASE-T SFP handoffs. The module fits C9300 SKUs only, not Catalyst 9300X or Catalyst 9300L. Count the free uplink slot, the blank and one SFP per active port.
Catalyst 9300X module bay
C9300-NM-4G fits C9300 SKUs only. Catalyst 9300X SKUs take C9300X network modules, with C9300X-NM-8Y for 1G/10G/25G SFP28 uplinks.
Ten-gigabit SFP uplinks
C9300-NM-4G is limited to four 1G SFP slots, and SFP+ modules do not operate. Use C9300-NM-8X for eight 10G SFP+ slots.
Fixed-uplink Catalyst 9300L
C9300-NM-4G does not fit Catalyst 9300L models. Catalyst 9300L SKUs use fixed 1G or 10G SFP/SFP+ uplinks and no network-module slot.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Form Factor | Plug-in Module | Modular | Modular | Modular |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 26 April 2025
The C9300-NM-4G has been reliable and efficient. It provides excellent connectivity for our high-speed applications and integrates well with our Cisco system.
Reviewed on the 20 July 2017
We use the C9300-NM-4G to expand our network. It's been a reliable, high-performance solution for our Gigabit Ethernet needs.
Reviewed on the 4 January 2021
The C9300-NM-4G is a great module for 1GE ports. It's reliable, easy to set up, and provides solid performance for our network.
Reviewed on the 30 July 2019
The C9300-NM-4G is perfect for expanding our network. It provides 4 ports of Gigabit Ethernet connectivity, delivering stable and reliable performance.
Reviewed on the 26 January 2025
This network module has significantly enhanced our network's capability. The C9300-NM-4G is easy to deploy and offers solid, high-speed connections.
C9300-NM-4G is the Cisco Catalyst 9300 4 x 1GE SFP Network Module for C9300 switch uplink slots. C9300 is the host family, NM marks a network module, 4G marks four 1 Gigabit Ethernet SFP ports, and the spare PID is C9300-NM-4G=.
C9300-NM-4G fits Catalyst 9300 C9300 SKUs in the uplink module slot. It does not fit Catalyst 9300X; C9300X-NM-8Y covers 1G/10G/25G SFP28 uplinks for those hosts. It does not fit Catalyst 9300L; those models use fixed 1G or 10G SFP/SFP+ uplinks.
A Catalyst 9300 uses C9300 network modules in its uplink module slot. The C9300 set is C9300-NM-4G, C9300-NM-4M, C9300-NM-8X, C9300-NM-2Q and C9300-NM-2Y. Catalyst 9300X uses C9300X network modules, and Catalyst 9300L uses fixed uplinks.
C9300-NM-4G has four 1 Gigabit Ethernet SFP slots. All valid ports are GigabitEthernet1/1/1 through GigabitEthernet1/1/4. Standard SFP modules run in any combination, while SFP+ modules do not operate and TenGigabitEthernet entries for those four positions are disregarded. Match the far end at 1 Gbps.
C9300-NM-4G takes standard Cisco SFP modules for its four 1G ports. SFP+ modules do not operate in the 1G network module, and the switch logs an error message when one is inserted. Order one SFP per active port, and match fiber or 1000BASE-T media at both ends.
One C9300-NM-4G fits each Catalyst 9300 switch because the host has one uplink module slot. A stack uses one module only in each member that needs modular uplinks. The network module is hot-swappable, and an empty slot takes C9300-NM-BLANK or the NM-BLANK-T1= spare blank.
C9300-NM-4G adds four standard 1G SFP uplink slots to a Catalyst 9300 switch. Its edge is the four-port SFP handoff in the C9300 network-module family. The module gives GigabitEthernet uplink interfaces and keeps 10G SFP+ modules out of operation.
C9300-NM-4G needs Cisco IOS XE Everest 16.5.1a or later on Catalyst 9300 hosts. Catalyst 9300 1G fiber switch models need Cisco IOS XE Release 16.11.1a or later. Run the higher host floor when the chassis model requires a later release than the module.
C9300-NM-4G= is the spare form of C9300-NM-4G. The spare PID describes the same Catalyst 9300 4 x 1GE SFP Network Module for an order where the network module is purchased separately. Match the host and software checks exactly as for C9300-NM-4G.
C9300-NM-4G uses four 1G SFP slots, while C9300-NM-4M uses four Multigigabit Ethernet interfaces. C9300-NM-4G is the standard SFP handoff for Catalyst 9300. C9300-NM-4M is the same four-port uplink bay role with mGig copper interfaces.
C9300-NM-4G provides four native 1G SFP interfaces, while C9300-NM-8X provides eight 10G SFP+ slots and runs 1G with SFP modules. C9300-NM-4G fits four 1G uplinks. C9300-NM-8X fits Catalyst 9300 builds that need more ports or 10G uplinks.
Cisco has not announced an end-of-sale date for C9300-NM-4G. C9300-NM-4G and C9300-NM-4G= remain in the Catalyst 9300 network-module ordering set. Catalyst 9300 hosts remain the named host family for the module.
Cisco Enhanced Limited Lifetime hardware warranty is the manufacturer term for C9300-NM-4G. ORM Systems offers new sealed and certified refurbished conditions. Certified refurbished units are inspected and bench-tested in a compatible host. New carries up to 3-year extended warranty, certified refurbished up to 1 year, and returns are 30 days on every condition; terms apply.