SFP-10G-SR
SAVE $1,300.12
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$2,688.38
$446.2583.4% off
Quantity:
C9200-NM-4X
Cisco C9200-NM-4X 4-Port 1G/10G SFP+ Network Module for Cata...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9200-NM-4X is a Catalyst 9200 4 x 10GE Network Module with four 1G/10G SFP+ Ethernet uplink ports for Catalyst 9200. 10G per port is its edge over C9200-NM-4G while it keeps four uplink ports. It fits C9200-24T, C9200-24P, C9200-24PB, C9200-24PXG, C9200-48T, C9200-48P, C9200-48PL, C9200-48PB and C9200-48PXG switches. A Cisco Catalyst 9200 network module uses the single hot-swappable uplink module slot and connects the switch to other devices through Cisco SFP or SFP+ transceivers. C9200L and C9200CX switches use fixed uplinks and do not take this module.
C9200-NM-4X price for new stock is $622.65, a 76.8% saving from the Cisco list price of $2,688.38. C9200-NM-4X refurb price is $446.25. C9200-NM-4X is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9200-NM-4X for additional pricing. Browse the full Cisco C9200-NM Catalyst Network Modules series or explore all Cisco products.
10 Gbps per port is the highest data rate, and each port also runs at 1 Gbps when the far-end transceiver and link speed match. Four SFP+ cages take any combination of standard SFP modules; 10G operation uses SFP+ optics. C9200-NM-4X first runs in Cisco IOS XE Gibraltar 16.10.1. Online insertion and removal needs a 6 to 8 second wait between removal and insertion. Install the module with cables and transceivers removed, then seat it face up and fasten the captive screws. C9200-NM-BLANK fills the slot when uplink ports are not required.
C9200-NM-4X is available new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate inspected; every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 9200 model, the free uplink module slot, Cisco IOS XE Gibraltar 16.10.1 minimum and the Cisco SFP or SFP+ transceivers. Regional stock/RMA: UK · EU · US · MEA; PO accepted · Net-30 for government · RMA with advance replacement. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition · terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x 1G/10G SFP+ |
Fits | Catalyst 9200 C9200 models |
Module Features | 10G per port over C9200-NM-4G |
Slot | Hot-swappable uplink module slot |
Minimum Software | Cisco IOS XE Gibraltar 16.10.1 |
Ships Without | Cisco SFP and SFP+ transceivers |
C9200-NM-4X sits in the modular uplink bay of a Catalyst 9200 access switch and presents four 1G or 10G SFP+ uplink interfaces toward distribution. Engineers terminate fiber optics in the module, then configure routed links, 802.1Q trunks, or EtherChannel according to the campus design. The switch keeps copper endpoint access separate from uplink module selection. The network gains a replaceable 10G handoff point without changing access ports, endpoint VLANs, or closet switching hardware.
A Catalyst 9200 StackWise-160 access block uses C9200-NM-4X modules on selected members to carry aggregated closet traffic northbound. Engineers place SFP+ uplinks on separate stack members, align optics with distribution ports, and configure cross-stack EtherChannel or redundant routed uplinks. Endpoint traffic from multiple access switches leaves the stack through planned 10G paths instead of isolated single-switch uplinks. The network gains higher closet resiliency and clearer uplink ownership under one stack management plane.
C9200-NM-4X functions as the migration point when a Catalyst 9200 access layer moves from 1G fiber uplinks to 10G distribution links. Engineers replace a blank module or lower-speed uplink module, retain existing downlink cabling, and phase optic changes around maintenance windows. The four SFP+ interfaces support parallel old and new uplink paths during planned transitions. The network gains a controlled refresh path that increases uplink bandwidth while preserving the installed access switch footprint.
A buyer has a C9200-48P or C9200-24T with an empty uplink slot and needs four 10G SFP+ links. The module gives four 1G/10G uplink ports, so the PO must count Cisco SFP+ transceivers and confirm Cisco IOS XE Gibraltar 16.10.1.
A stack has mixed C9200 members and the uplink members need the same 1G/10G handoff. Each C9200 switch has one uplink module slot, so the PO must count one module for each member that needs four uplink ports and match optics per port.
A new C9200 chassis build has the uplink slot open and no fixed uplinks. The switch must have a network module or C9200-NM-BLANK in the slot, so the PO must decide between active 1G/10G uplinks and the blank before installation.
25G uplink requirement
C9200-NM-4X tops out at 10 Gbps per port in C9200 models. C9200-NM-2Y gives two 25G SFP28 slots only on C9200-24PXG and C9200-48PXG.
40G uplink requirement
C9200-NM-4X tops out at 10 Gbps per port. C9200-NM-2Q gives two 40G QSFP+ slots only on C9200-24PXG and C9200-48PXG.
Fixed uplink switch
C9200L and C9200CX models have no modular uplink slot, so C9200-NM-4X does not fit those switches. C9200L-24T-4X has fixed 4x 1/10G uplinks.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Module | Supervisor/CPU Module | Blank Module | Ethernet | Ethernet |
| Form Factor | Plug-in Module | Modular | Modular | Modular | Modular |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 6 August 2017
The Cisco Catalyst 9200 4 x 10GE Network Module has significantly improved our network's speed. It delivers high performance with minimal configuration needed.
Reviewed on the 13 May 2024
The Catalyst 9200 4 x 10GE module has been a great addition to our network infrastructure. It offers reliable connectivity and handles traffic seamlessly.
Reviewed on the 15 October 2023
We've had no issues with the Catalyst 9200 4 x 10GE Network Module. It's reliable, fast, and perfect for managing higher bandwidth needs.
Reviewed on the 12 October 2024
The Catalyst 9200 4 x 10GE module provides excellent performance. It was easy to integrate and has improved our network's efficiency considerably.
Reviewed on the 9 March 2026
This network module is fantastic. The Catalyst 9200 4 x 10GE provides stable, high-speed performance that has supported our growing network.
C9200-NM-4X is the Cisco Catalyst 9200 4 x 10GE Network Module, spare. It adds four 1G/10G SFP+ uplink ports to C9200 modular-uplink Catalyst 9200 switches. C9200 identifies Catalyst 9200, NM identifies a network module and 4X identifies four 10G uplink slots.
C9200-NM-4X fits C9200-24T, C9200-24P, C9200-24PB, C9200-24PXG, C9200-48T, C9200-48P, C9200-48PL, C9200-48PB and C9200-48PXG. C9200L and C9200CX switches do not take it because they have fixed uplinks or no modular uplink slot.
A Catalyst 9200 C9200 modular-uplink switch uses C9200-NM-4X, C9200-NM-4G, C9200-NM-2Y, C9200-NM-2Q or C9200-NM-BLANK. C9200-NM-4X is the four-port 1G/10G choice. C9200-NM-2Y and C9200-NM-2Q are only for C9200-24PXG and C9200-48PXG.
C9200-NM-4X provides four SFP+ slots. Each port runs at 1 Gbps or 10 Gbps, and the far end must match the selected speed and the installed transceiver. The module preserves four uplink ports while moving a C9200 switch from 1G uplinks to 10G uplinks.
C9200-NM-4X uses Cisco SFP transceivers for 1G links and Cisco SFP+ transceivers for 10G links. The slot accepts any combination of standard SFP modules. Order transceivers separately, remove transceivers before installing or removing the module, and match the media to the far end.
One C9200-NM-4X fits in the single hot-swappable uplink module slot of each C9200 switch. A stack takes one module in each member that needs uplink ports. An empty uplink slot takes C9200-NM-BLANK for airflow when uplink ports are not required.
C9200-NM-4X gives Catalyst 9200 a field-replaceable 10G uplink option with four ports and 1G fallback on each port. Its edge is 10G per port over C9200-NM-4G while keeping four ports. The module works in both 1G and Multigigabit Ethernet C9200 switch models.
C9200-NM-4X first runs with Cisco IOS XE Gibraltar 16.10.1 on Catalyst 9200. C9200-24PB first runs with Cisco IOS XE Amsterdam 17.2.1, and C9200-48PL first runs with Cisco IOS XE Amsterdam 17.3.1. Match the higher switch floor when those hosts are in the stack.
C9200-NM-4X= is the spare ordering form for C9200-NM-4X. The hardware role stays Catalyst 9200 4 x 10GE Network Module, spare. Use the supplied SKU on the PO and match the host, slot and Cisco transceiver plan to the same requirements.
C9200-NM-4X gives 1G/10G uplinks, while C9200-NM-4G gives 1G uplinks. Both offer four ports for C9200 modular-uplink switches. Choose C9200-NM-4X when the far end runs 10G, and choose C9200-NM-4G only when every uplink is 1G.
C9200-NM-4X gives four 1G/10G SFP+ ports across C9200 1G and Multigigabit Ethernet models. C9200-NM-2Y gives two 25G SFP28 slots and only fits C9200-24PXG and C9200-48PXG. Choose by host first, then by required per-port speed.
C9200-NM-4X gives four 1G/10G SFP+ ports for C9200 1G and Multigigabit Ethernet models. C9200-NM-2Q gives two 40G QSFP+ slots and only fits C9200-24PXG and C9200-48PXG. Choose C9200-NM-4X for four 10G uplinks.
Cisco has not announced an end-of-sale date for C9200-NM-4X. C9200-NM-4X serves C9200 modular-uplink switches in the Catalyst 9200 family, and the C9200 network module ordering form remains active. C9200L and C9200CX fixed-uplink models do not take it.
ORM offers C9200-NM-4X new sealed and certified refurbished. Cisco Enhanced Limited Lifetime warranty applies for qualifying original-customer purchases; ORM offers new — up to 3-year extended and certified refurbished — up to 1 year. Returns are 30 days on every condition · terms apply.