SFP-25G-SR-S
SAVE $1,039.15
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$5,299.99
$794.8585% off
Quantity:
C9300-NM-2Y
Cisco C9300-NM-2Y 2-Port 25G SFP28 Network Module for Cataly...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9300-NM-2Y is a network module and Cisco Catalyst 9300 2 x 25G/10G/1G SFP28 Network Module with two Ethernet SFP28 uplink ports for Catalyst 9300 switches. 25G per port is the edge over C9300-NM-8X. Catalyst 9300X uses C9300X-NM modules. Cisco Catalyst 9300 network module deployments place it in the front uplink network module slot. The two-port 25G SFP28 network module fits C9300 SKUs, takes Cisco SFP, SFP+ and SFP28 pluggable modules, and gives the host TwentyFiveGigabitEthernet1/1/1 and TwentyFiveGigabitEthernet1/1/2 interfaces. A stack uses one module in each member that needs modular uplinks, up to nine members.
C9300-NM-2Y price for new stock is $983.85, a 81.4% saving from the Cisco list price of $5,299.99. C9300-NM-2Y refurb price is $794.85. C9300-NM-2Y is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9300-NM-2Y for additional pricing. Browse the full Cisco C9300-NM Catalyst Network Modules series or explore all Cisco products.
25 Gbps per port is available with SFP28 modules, and 1 Gbps and 10 Gbps operation uses SFP and SFP+ modules in the same slots. C9300-NM-2Y accepts two Cisco pluggable modules; order one transceiver or cable for each port in use. TwentyFiveGigabitEthernet1/1/1 and TwentyFiveGigabitEthernet1/1/2 are the configured interfaces. Hot swap is allowed, and online insertion and removal needs a 6-8 second wait between removal and insertion. The switch logs insertion and removal for SFP/SFP+/SFP28 network modules. Cisco IOS XE Fuji 16.8.1a is the first release for the 25G uplink module, with later releases for newer optics.
C9300-NM-2Y is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate are inspected, and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 9300 chassis, the free uplink network module slot, Cisco IOS XE Fuji 16.8.1a, and two optics or cables. UK, EU, US and MEA; RMA with advance replacement. PO accepted and Net-30 for government. Warranty: new — up to 3-year extended · certified refurbished — up to 1 year. Returns: 30 days on every condition · terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x 1/10/25G SFP28 |
Fits | Catalyst 9300 |
Module Features | 25G per port; SFP/SFP+/SFP28 operation |
Slot | Front uplink network module slot |
Hot Swap | Yes; OIR wait is 6-8 seconds |
Minimum Software | Cisco IOS XE Fuji 16.8.1a |
C9300-NM-2Y installs in the modular uplink bay of a compatible Catalyst 9300 access switch and presents two 25GE SFP28 uplink slots toward distribution. Engineers connect supported SFP28 optics or DAC cables to upstream 25G ports, then configure trunks, routed links, or LACP EtherChannel according to the campus design. Endpoint traffic remains on the switch access ports while northbound traffic exits through dedicated high-speed uplinks. The result is a cleaner access-to-distribution handoff with more uplink bandwidth per closet.
In a stacked Catalyst 9300 wiring closet, C9300-NM-2Y gives selected stack members two 25GE SFP28 uplink interfaces for northbound connectivity. Operations teams standardize the module, optics, port numbering, and uplink templates across repeated closets, then apply consistent VLAN trunking, routing, or EtherChannel policies through Cisco IOS XE. Each stack keeps local endpoint switching inside the closet while using 25G links for aggregated traffic. The result is repeatable uplink planning across stack-based access deployments.
The module occupies the Catalyst 9300 uplink position during a migration from lower-speed access uplinks to 25G distribution connectivity. Network teams replace the selected uplink module, install SFP28 links that match the upstream switch, and move routed or trunked handoffs onto the new 25GE interfaces. C9300-NM-2Y keeps the access switch chassis in service while the uplink layer changes around it. The result is higher northbound capacity without redesigning the endpoint access layer.
Buyer has a failed Catalyst 9300 25G uplink module and needs the same port numbering. C9300-NM-2Y brings TwentyFiveGigabitEthernet1/1/1 and 1/1/2 back to the chassis. Match Cisco IOS XE Fuji 16.8.1a or later, remove cables before OIR, and order the transceivers separately before the PO.
Buyer has Catalyst 9300 access switches with 10G uplinks and needs a 25G handoff while keeping Catalyst 9300. The network module gives two SFP28 ports per switch member at 1/10/25G. Count one module for each uplinking member and two Cisco transceivers per module before the PO.
Buyer has a Catalyst 9300 stack with mixed uplink members and wants the same 25G module across the stack. Each uplinking member takes one network module, and a stack has up to nine members. Count the members that need uplinks, then match optics, cables and software before the PO.
Catalyst 9300X uplink bay
C9300-NM-2Y fits Catalyst 9300 only. Catalyst 9300X switches take C9300X-NM modules, with C9300X-NM-8Y for eight 25G/10G/1G SFP28 ports.
Eight 10G uplink ports
C9300-NM-2Y has 2 external ports. Choose C9300-NM-8X when a Catalyst 9300 needs 8 10G/1G SFP+ uplinks instead of 2 SFP28 uplinks.
40G QSFP uplinks
C9300-NM-2Y has SFP28 slots and 25G per port. Choose C9300-NM-2Q when a Catalyst 9300 needs 2 40G QSFP+ uplinks.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Module | SFP+ | Supervisor Module | Line Card |
| Form Factor | Plug-in Module | Modular | Modular | Full Slot |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 25 July 2020
We upgraded to the C9300-NM-2Y, and the results are fantastic. The 2x25GE ports offer blazing fast connections, improving our overall network performance.
Reviewed on the 30 January 2024
The C9300-NM-2Y has been an excellent addition to our network. It supports high-speed traffic efficiently, providing the performance our business needs.
Reviewed on the 22 February 2023
This module is ideal for scaling our network. It offers high bandwidth and has been extremely reliable in supporting our growing data needs.
Reviewed on the 18 February 2021
The Catalyst 9300 2x25GE Network Module offers remarkable speed and scalability. It's been perfect for handling our growing bandwidth needs.
Reviewed on the 28 September 2026
The Catalyst 9300 2x25GE Network Module has been perfect for high-demand applications. It offers great performance, and the integration was seamless.
C9300-NM-2Y is the Cisco Catalyst 9300 2 x 25G/10G/1G SFP28 Network Module. It provides two uplink network module ports for Catalyst 9300 switches, with C9300 meaning Catalyst 9300, NM meaning network module, and 2Y meaning two 25G SFP28-rate ports.
C9300-NM-2Y fits Catalyst 9300 C9300 SKUs and takes the front uplink network module slot. It does not fit Catalyst 9300X; Catalyst 9300X uses C9300X-NM-8Y for 25G SFP28 uplinks. Catalyst 9300L and Catalyst 9300LM models use fixed uplinks, so the modular C9300 slot is absent.
A Catalyst 9300 uses C9300-NM-4G, C9300-NM-4M, C9300-NM-8X, C9300-NM-2Q, C9300-NM-2Y or a blank in the uplink network module slot. C9300-NM-2Y is the two-port 25G/10G/1G SFP28 choice. The blank is C9300-NM-BLANK. Order one per switch that needs modular uplinks.
C9300-NM-2Y provides two external Ethernet ports rated at 1 Gbps, 10 Gbps and 25 Gbps per port. SFP modules run 1G, SFP+ modules run 10G, and SFP28 modules run 25G. The far end must match the selected optic or cable speed.
C9300-NM-2Y takes Cisco SFP, SFP+ and SFP28 pluggable modules. 25G choices include SFP-25G-SR-S, SFP-10/25G-CSR-S, SFP-H25G-CU1M, SFP-H25G-CU2M, SFP-H25G-CU3M and SFP-H25G-CU5M. SFP-10/25G-CSR-S runs 10G or 25G with this network module.
One C9300-NM-2Y fits one Catalyst 9300 uplink network module slot. A Catalyst 9300 stack can have up to nine members, and each member that needs modular uplinks takes one network module. The slot stays filled by a network module or C9300-NM-BLANK.
C9300-NM-2Y gives the Catalyst 9300 a 25G-per-port uplink option, and that is its edge over the 10G C9300-NM-8X. The same slots also run 1G SFP and 10G SFP+ modules. Hot swap lets the buyer replace the module without powering off the switch.
C9300-NM-2Y first runs on Catalyst 9300 with Cisco IOS XE Fuji 16.8.1a. Cisco IOS XE Fuji 16.9.1 adds SFP-25G-SR-S, SFP-10/25G-CSR-S and 25G AOC choices, while Cisco IOS XE Amsterdam 17.2.1 adds more SFP-H25G-CU cable lengths.
C9300-NM-2Y= is the spare ordering form for C9300-NM-2Y. The hardware role stays the same: two 25G/10G/1G SFP28 ports for Catalyst 9300 C9300 SKUs. The equals sign marks a spare form, not a different host fit or port count.
C9300-NM-2Y reaches 25G per port, while C9300-NM-8X provides eight 10G/1G SFP+ ports. Choose C9300-NM-2Y for two 25G handoffs on Catalyst 9300. Choose C9300-NM-8X when port count matters more than 25G per-port speed.
C9300-NM-2Y uses two SFP28 slots for 1/10/25G operation, while C9300-NM-2Q uses two QSFP+ slots for 40G operation. Choose C9300-NM-2Y for SFP, SFP+ or SFP28 media. Choose C9300-NM-2Q for Catalyst 9300 40G QSFP+ uplinks.
Cisco has not announced an end-of-sale date for C9300-NM-2Y. The module serves Catalyst 9300 C9300 SKUs and remains in the current Catalyst 9300 network module ordering table with C9300-NM-2Y= as the spare form. No replacement PID applies.
ORM offers C9300-NM-2Y new sealed and certified refurbished; Cisco Enhanced Limited Lifetime applies to Catalyst 9300 Series for the original customer. New units carry up to 3-year extended warranty, certified refurbished units carry up to 1 year, and returns run 30 days on every condition · terms apply.