Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$30,929.64
$2,632.3591.5% off
Quantity:
C9400-LC-24XS
Cisco C9400-LC-24XS 24-Port 10G SFP+ Line Card for Catalyst...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9400-LC-24XS is a line card, the Cisco Catalyst 9400 Series Switch 24-port 10 Gigabit Ethernet Fiber Line Card, with 24 SFP+/SFP ports for Catalyst 9400. 10GE SFP+ per port gives it the edge over C9400-LC-24S. It fits C9404R, C9407R and C9410R. Cisco Catalyst 9400 line card buyers use it in non-supervisor module slots with C9400-SUP-1, C9400-SUP-1XL, C9400-SUP-1XL-Y, C9400X-SUP-2 or C9400X-SUP-2XL. A C9404R has slots 1 and 4; C9407R has slots 1, 2 and 5 to 7; C9410R has slots 1 to 4 and 7 to 10. The 24-port 10G SFP+ line card carries 1G and 10G fiber handoffs, and SFP+ and SFP optics run on the same card.
C9400-LC-24XS price for new stock is $3,335.85, a 89.2% saving from the Cisco list price of $30,929.64. C9400-LC-24XS refurb price is $2,632.35. C9400-LC-24XS is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9400-LC-24XS for additional pricing. Browse the full Cisco C9400-LC Catalyst Line Cards series or explore all Cisco products.
10 Gbps per port is the highest rated speed, and each port also runs 1 Gbps. 240 Gbps maximum bandwidth, full duplex non-blocking traffic, applies to the line card before the chassis and supervisor set the final available bandwidth. Four 6-port groups carry 20 Gbps per port group. C9400-LC-24XS runs SFP+ and SFP optics simultaneously without restrictions. MACsec-256, IEEE 1588/802.1as hardware readiness, a front-facing passive UHF RFID tag and Layer 2 to Layer 4 jumbo frames up to 9216 bytes are card features. All Catalyst 9400 line cards are hot swappable, and an empty module slot takes C9400-S-BLANK.
C9400-LC-24XS is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate inspected, optics bay recognition checked and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the C9404R, C9407R or C9410R chassis, a free non-supervisor module slot, the supervisor PID and one SFP+ or SFP optic per live port. UK · EU · US · MEA stock carries RMA with advance replacement. PO accepted, Net-30 for government, 30 days on every condition, terms apply, with new — up to 3-year extended and certified refurbished — up to 1 year warranty.
| Key Specs | Key Spec Values |
|---|---|
Ports | 24 x 1/10G SFP+/SFP |
Capacity | 240 Gbps maximum bandwidth |
Fits | C9410R / C9407R / C9404R |
Module Features | 10GE SFP+ per port / MACsec-256 |
Requires | C9400-SUP-1, C9400-SUP-1XL, C9400-SUP-1XL-Y, C9400X-SUP-2 or C9400X-SUP-2XL |
Slot | Non-supervisor module slots, one slot |
In a large enterprise campus environment, the C9400-LC-24XS Cisco Catalyst 9400 Series 24-Port 10 Gigabit Ethernet (SFP+) module aggregates multiple distribution and access switches over redundant 10 Gbps uplinks. By leveraging Cisco StackWise Virtual for active/active resiliency and Cisco DNA Center for automated provisioning and policy enforcement, IT teams achieve non-stop connectivity, sub-microsecond latency, and zero-touch network scaling—delivering consistent user experience and simplified operations.
Data center architects deploy the C9400-LC-24XS as a spine-layer switch to interconnect hyperconverged infrastructure and VM clusters at 10 Gigabit speeds. With hardware-accelerated routing, VXLAN BGP-EVPN support, and integrated telemetry via Cisco IOS XE, this 24-port SFP+ line card provides deterministic east-west traffic performance, granular multi-tenant segmentation, and real-time analytics—enabling predictable application SLAs and simplified scale-out operations.
Service providers use the C9400-LC-24XS module in metro aggregation sites to terminate and scale MEF-compliant business Ethernet services for enterprise customers. This 24-port 10 Gigabit Ethernet (SFP+) solution delivers VRF-Lite isolation, advanced QoS with Cisco IOS XE hierarchical shaping, and embedded SLA monitoring. The result is a future-proof aggregation platform that ensures multi-tenant security, proactive service assurance, and reduced OPEX through unified management.
An operations team has a failed C9400-LC-24XS in a Catalyst 9400 and needs the same 24-port 10G SFP+ faceplate back in the same non-supervisor slot. The replacement must match the supervisor, Cisco IOS XE floor and one SFP+ or SFP optic per active fiber before the PO.
A chassis build uses empty line-card bays in a C9404R, C9407R or C9410R and needs 24 fiber ports per slot. Count the non-supervisor slots, the C9400-S-BLANK fillers left behind and the supervisor pair before ordering the line cards and optics.
A distribution handoff needs 1 Gbps and 10 Gbps optics on the same Catalyst 9400 line card. C9400-LC-24XS lets SFP and SFP+ ports run together, so the buyer must count each live fiber and match the far-end speed and optic type before the PO.
48-port 10G SFP+ density
C9400-LC-24XS has 24 SFP+/SFP ports; Catalyst 9400 builds needing 48 10G SFP+ ports in one slot use C9400-LC-48XS with C9400X-SUP-2 or C9400X-SUP-2XL.
25G fiber ports
C9400-LC-24XS rates ports at 10 GE or 1 GE; Catalyst 9400 builds needing 25G SFP28 ports use C9400-LC-24XY with C9400X-SUP-2 or C9400X-SUP-2XL.
Copper multigigabit access
C9400-LC-24XS uses SFP+/SFP fiber cages; Catalyst 9400 builds needing 100M/1G/2.5G/5G/10G RJ-45 data ports use C9400-LC-48TX with C9400X-SUP-2 or C9400X-SUP-2XL.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Line Card | Ethernet Module | Ethernet |
| Data Rate | 10G | 1G | 1Gbps |
| Connector Type | SFP / SFP+ | RJ-45 | SFP |
| Form Factor | Full Slot | Modular | Modular |
| Operating Temperature | -5°C to +45°C up to 1800 m / -5°C to +40°C up to 3000 m | 0 to 70°C | 0 to 50°C |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 9 October 2018
The Cisco Catalyst 9400 24-Port 10 Gigabit Ethernet module is a game-changer for our network. It provides excellent speed and reliability for all our high-demand applications.
Reviewed on the 11 February 2022
We upgraded to the 24-port SFP+ module and are seeing incredible performance. It supports heavy traffic with ease and integrates well into our existing setup.
Reviewed on the 2 May 2023
The C9400-LC-24XS provides solid 10G Ethernet support, ensuring that our business runs smoothly with minimal latency and high bandwidth availability.
Reviewed on the 22 September 2021
We've used the 24-port 10GE module for our data-intensive applications, and it's delivered remarkable performance with minimal downtime.
Reviewed on the 30 May 2020
This module has transformed our network's speed and performance. With 10G Ethernet connectivity, it's been perfect for our data-heavy operations.
C9400-LC-24XS is the Cisco Catalyst 9400 Series 24-Port 10 Gigabit Ethernet (SFP+) line card. It is a 24-port 10G fiber line card for Catalyst 9400 chassis. LC marks line card, 24 marks port count, and XS marks 10 Gigabit SFP+/SFP fiber. C9400-LC-24XS= is the spare form.
C9400-LC-24XS fits Catalyst 9400 chassis C9404R, C9407R and C9410R. It installs in any non-supervisor module slot. It works with C9400-SUP-1, C9400-SUP-1XL, C9400-SUP-1XL-Y, C9400X-SUP-2 and C9400X-SUP-2XL. There are no other restrictions for this line card.
A Catalyst 9400 uses C9400-LC-24XS for 24 10G SFP+ fiber ports. The same line-card group also gives C9400-LC-24S, C9400-LC-48S, C9400-LC-48XS, C9400-LC-24XY, C9400-LC-12QC, C9400-LC-48T, C9400-LC-48TX, C9400-LC-48U, C9400-LC-48UX, C9400-LC-48P, C9400-LC-48H, C9400-LC-48HN and C9400-LC-48HX.
C9400-LC-24XS has 24 SFP+/SFP ports rated for 10 GE or 1 GE. SFP+ and SFP optics run on the same line card without restrictions. The line card has 240 Gbps maximum bandwidth, and bandwidth is allocated across four 6-port groups at 20 Gbps per port group.
C9400-LC-24XS uses standard Small Form-Factor Pluggable Plus optics for 10G and SFP optics for 1G. SFP+ and SFP optics run at the same time on the card. Transceivers are not included, so order one Cisco transceiver for each live fiber port and match the far-end speed.
A Catalyst 9400 takes C9400-LC-24XS in non-supervisor module slots: C9404R slots 1 and 4, C9407R slots 1, 2 and 5 to 7, and C9410R slots 1 to 4 and 7 to 10. All Catalyst 9400 line cards are hot swappable. An empty module slot takes C9400-S-BLANK.
C9400-LC-24XS adds 10GE SFP+ per port to a Catalyst 9400 line-card slot. It also provides SFP+ and SFP simultaneous use, MACsec-256 in hardware, Layer 2 to Layer 4 jumbo frames up to 9216 bytes, IEEE 1588/802.1as hardware readiness and a front-facing passive UHF RFID tag.
C9400-LC-24XS starts at Cisco IOS XE Everest 16.6.2 as its first release. C9400-SUP-1XL-Y builds use Cisco IOS XE 16.9.1 or later, and C9400X-SUP-2 or C9400X-SUP-2XL builds use Cisco IOS XE 17.7.1 or later. The chassis, supervisor and line card floor must be matched.
C9400-LC-24XS gives 10GE SFP+ per port, while C9400-LC-24S is the 24-port 1 Gigabit Ethernet SFP line card. Both fit Catalyst 9400 chassis and the same five supervisors. Choose C9400-LC-24XS for 10G or mixed 1G/10G fiber, and C9400-LC-24S for 1G SFP density.
C9400-LC-24XS fits all five Catalyst 9400 supervisor options and has 24 1G/10G SFP+/SFP ports. C9400-LC-48XS has 48 1G/10G SFP+/SFP ports, starts at Cisco IOS XE 17.8.1 and requires C9400X-SUP-2 or C9400X-SUP-2XL. Choose by supervisor first, then port count.
C9400-LC-24XY is the next speed step; it has 20 25G SFP28 ports and 4 10G SFP+ ports. C9400-LC-24XS has 24 1G/10G SFP+/SFP ports and fits all five Catalyst 9400 supervisors. C9400-LC-24XY requires C9400X-SUP-2 or C9400X-SUP-2XL and starts at Cisco IOS XE 17.12.1.
Cisco has not announced an end-of-sale date for C9400-LC-24XS. The line card serves Catalyst 9400 chassis C9404R, C9407R and C9410R with C9400-SUP-1, C9400-SUP-1XL, C9400-SUP-1XL-Y, C9400X-SUP-2 or C9400X-SUP-2XL.
ORM offers C9400-LC-24XS new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host. Cisco Enhanced Limited Lifetime Hardware Warranty applies to new Catalyst 9400 hardware; ORM offers new — up to 3-year extended and certified refurbished — up to 1 year. Returns are 30 days on every condition; terms apply.