SFP-10G-SR
SAVE $1,300.12
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$3,221.84
$542.8583.2% off
Quantity:
C9300-NM-8X
Cisco C9300-NM-8X 8-Port 10G/1G SFP+ Network Module for Cata...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9300-NM-8X is a Catalyst 9300 8 x 10G/1G SFP+ Network Module for Catalyst 9300 modular uplink switches. Eight SFP+ slots on one module give C9300 models more 10G ports than C9300-NM-4G. It fits C9300 SKUs, not C9300X or fixed-uplink C9300L models. The Cisco Catalyst 9300 network module uses the front uplink network module slot and needs Cisco IOS XE Everest 16.5.1a or later. The ports take Cisco SFP or SFP+ modules for 1G or 10G uplinks. All eight interfaces use TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/8. A Catalyst 9300 stack takes one module per uplinking member; an 8-member StackWise-480 stack uses eight modular uplink bays when every member carries uplinks.
C9300-NM-8X price for new stock is $704.55, a 78.1% saving from the Cisco list price of $3,221.84. C9300-NM-8X refurb price is $542.85. C9300-NM-8X is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9300-NM-8X for additional pricing. Browse the full Cisco C9300-NM Catalyst Network Modules series or explore all Cisco products.
10 Gbps per port is the rated SFP+ mode, and 1 Gbps per port runs with SFP modules while the interface names remain TenGigabitEthernet. One module fills the uplink slot on each Catalyst 9300 member that needs modular uplinks. Hot swap is allowed, and a network module or C9300-NM-BLANK must occupy the slot for EMC, safety and thermal operation. C9300-NM-8X uses one jackscrew; tighten the screw to seat the module and fully unscrew it before removal. The switch logs insertion or removal of modules with SFP/SFP+/SFP28 slots. Remove cables and pluggable transceivers before insertion or removal, and wait 6-8 seconds between online insertion and removal actions.
C9300-NM-8X is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; optics bay recognition checked, and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 9300 model, the free uplink slot, Cisco IOS XE Everest 16.5.1a or later and one Cisco SFP or SFP+ transceiver per used port. PO accepted and Net-30 for government; UK, EU, US and MEA stock/RMA; RMA with advance replacement. Warranty is up to 3-year extended for new and up to 1 year for certified refurbished; returns are 30 days on every condition, terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 8 x 10G/1G SFP+ |
Fits | Catalyst 9300 C9300 SKUs |
Module Features | Eight 10G/1G SFP+ uplinks |
Requires | C9300 uplink network module slot |
Slot | Front uplink slot, one per switch |
Minimum Software | Cisco IOS XE Everest 16.5.1a |
C9300-NM-8X supports Cisco Catalyst 9300 access switches that need additional high-speed fiber uplinks without replacing the base switch chassis. The module adds eight 10G/1G SFP+ slots for connecting access closets to distribution, aggregation, or core switches. It is best quoted with compatible SFP or SFP+ optics, fiber patch cables, and the target Catalyst 9300 switch model to confirm support. This use case fits campus refresh projects, access-layer upgrades, and enterprise networks standardizing on Catalyst 9300 modular-uplink hardware.
C9300-NM-8X fits upgrade projects where existing Catalyst 9300 switches need to move from limited 1G uplinks to higher-density 10G fiber connectivity. The eight SFP+ ports help increase uplink bandwidth for user traffic, wireless access points, cameras, voice endpoints, and other access-layer services. Teams can use supported 1G SFP optics during transition phases and shift to 10G SFP+ optics as distribution capacity grows. Buyers should confirm IOS XE compatibility, optic type, fiber reach, and upstream switch port availability before ordering.
C9300-NM-8X is useful in Catalyst 9300 switch stack designs where multiple uplinks are required for redundancy, bandwidth aggregation, or diverse fiber paths. The module can support resilient uplink planning with EtherChannel, cross-stack uplinks, and separate connections toward distribution switches when the host stack and upstream network are configured correctly. It helps network teams keep access-layer management centralized while expanding fiber handoff options from the stack. This use case fits enterprise wiring closets, campus buildings, and branch sites with growing uplink demand.
A buyer has a Catalyst 9300 with failed modular uplink ports and the chassis still needs 10G or 1G SFP links. The replacement must match the C9300 uplink network module slot, Cisco IOS XE Everest 16.5.1a or later and the number of SFP/SFP+ transceivers in use before the PO.
A buyer is moving a C9300 access switch from 1G uplinks to 10G uplinks without changing the switch model. The module provides eight SFP+ slots while still taking SFP modules for 1G links. Count one module per uplinking switch and one Cisco transceiver per active port before the PO.
A buyer is aligning uplink hardware across a StackWise-480 group of Catalyst 9300 members. Each member that needs modular uplinks takes one network module in its front uplink slot. An 8-member stack uses eight modules only when every member carries uplinks; match the optics count before the PO.
C9300X switch generation
C9300-NM-8X fits C9300 SKUs only. C9300X switches take C9300X-NM-8Y for eight 25G/10G/1G SFP28 slots on that generation.
Fixed-uplink Catalyst 9300L
C9300-NM-8X needs a C9300 modular uplink slot. C9300L and C9300LM switches use fixed uplink ports, so the switch PID must carry the required uplinks.
25G uplink ports
C9300-NM-8X reaches 10G per port. Catalyst 9300 buyers needing 25G use C9300-NM-2Y for two 25G/10G/1G SFP28 slots.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Module | Network Module |
| Data Rate | 10G | 10G |
| Form Factor | Plug-in Module | Plug-in Module |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 16 June 2026
C9300-NM-8X gave our Catalyst 9300 access stack the extra 10G SFP+ uplinks we needed for distribution connectivity.
Reviewed on the 30 April 2026
The module was recognized by our Cisco Catalyst 9300 switch and all eight SFP+ ports tested correctly with our optics.
Reviewed on the 14 November 2020
This network module was exactly what we needed to upgrade our access closet uplinks from 1G to 10G fiber.
Reviewed on the 25 April 2019
Refurbished C9300-NM-8X arrived clean, seated properly in the switch, and passed optic detection during staging.
Reviewed on the 6 April 2023
Solid Cisco Catalyst 9300 uplink module for adding multiple SFP+ fiber connections without replacing the switch chassis.
Reviewed on the 19 March 2019
Good procurement experience. ORM Systems helped confirm that C9300-NM-8X was the right uplink module for our 9300 deployment.
C9300-NM-8X is the Cisco Catalyst 9300 8 x 10G/1G SFP+ Network Module. It adds eight SFP+ uplink slots to a Catalyst 9300 switch. C9300 names the Catalyst 9300 host, NM means network module, and 8X identifies eight 10G-class SFP+ slots.
C9300-NM-8X fits C9300 SKUs in the Catalyst 9300 Series. It does not fit C9300X SKUs; those take C9300X-NM network modules. It does not fit C9300L or C9300LM fixed-uplink switches. The switch needs a C9300 uplink network module slot.
A Catalyst 9300 uses C9300-NM-4G, C9300-NM-4M, C9300-NM-8X, C9300-NM-2Q, C9300-NM-2Y or C9300-NM-BLANK in its modular uplink bay. It also takes Catalyst 3850 uplink network modules. Pick the PID by uplink speed, port count and connector, then count one module per switch.
C9300-NM-8X has eight external SFP+ ports. Each port runs at 10G with SFP+ modules or 1G with SFP modules, and the interface names stay TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/8. Match the far-end speed and media for each link.
C9300-NM-8X uses Cisco SFP modules for 1G and Cisco SFP+ modules for 10G. The module ships without transceivers. Count one pluggable transceiver per active port, match the far-end speed and media, and remove transceivers before installing or removing the network module.
One C9300-NM-8X fits in the front uplink network module slot of a Catalyst 9300 switch. An 8-member StackWise-480 stack takes one module per member that needs modular uplinks. The slot must contain a network module or C9300-NM-BLANK when uplink ports are not required.
C9300-NM-8X adds eight 10G/1G SFP+ uplink slots to a Catalyst 9300 switch. The edge over C9300-NM-4G is the eight 10G/1G SFP+ port set instead of four 1G SFP ports. The module is hot-swappable and takes mixed SFP and SFP+ modules.
C9300-NM-8X needs Cisco IOS XE Everest 16.5.1a as its first supported release on C9300 switches. Catalyst 9300 1G fiber switch models use Cisco IOS XE Gibraltar 16.11.1a or later as their host floor. Use the higher release when the chassis floor is higher.
C9300-NM-8X gives a Catalyst 9300 eight 10G/1G SFP+ uplink slots. C9300-NM-4G gives the same host four 1GE SFP slots and does not run SFP+ modules. Choose C9300-NM-8X for eight 10G uplinks; choose C9300-NM-4G for 1G-only uplinks.
C9300-NM-2Y gives two 25G/10G/1G SFP28 slots; C9300-NM-8X gives eight 10G/1G SFP+ slots. Choose C9300-NM-2Y when 25G per port matters more than port count. Choose C9300-NM-8X when a Catalyst 9300 needs eight 10G uplinks in one module.
C9300X-NM-8Y fits C9300X SKUs and gives eight 25G/10G/1G SFP28 slots. C9300-NM-8X fits C9300 SKUs and gives eight 10G/1G SFP+ slots. The buyer must match the switch generation first because C9300 modules and C9300X modules do not cross-fit.
Cisco has not announced an end-of-sale date for C9300-NM-8X. The module serves Catalyst 9300 C9300 modular-uplink switches and uses the same lifecycle planning as the host switch, software train and installed transceivers. Confirm the exact chassis PID before a spare buy.
C9300-NM-8X carries Cisco Enhanced Limited Lifetime hardware warranty with the Catalyst 9300 family. ORM offers new sealed and certified refurbished condition. New warranty is up to 3-year extended; certified refurbished warranty is up to 1 year. Returns are 30 days on every condition, terms apply.