Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$3,221.84
$121.8096.2% off
Quantity:
C9300-NM-2Q
Cisco C9300-NM-2Q 2-Port 40G QSFP+ Network Module for Cataly...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9300-NM-2Q is a Catalyst 9300 Series 2x 40G Network Module with two 40G QSFP+ uplink slots for Catalyst 9300 switches. 40G QSFP+ per port is its edge over 10G SFP+ modules, and each 40G port also splits into four 10G ports with a 4x10G breakout cable. A Cisco Catalyst 9300 network module fits C9300 SKUs only; Catalyst 9300X takes its own C9300X network modules, and Catalyst 9300L uses fixed uplinks. It slides into the front uplink network module slot, replaces the Type 1 blank, and uses Cisco QSFP+ optics or 4x10G breakout cabling for aggregation links. One module serves each stack member that needs modular uplinks.
C9300-NM-2Q price for new stock is $475.65, a 85.2% saving from the Cisco list price of $3,221.84. C9300-NM-2Q refurb price is $121.80. C9300-NM-2Q is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9300-NM-2Q for additional pricing. Browse the full Cisco C9300-NM Catalyst Network Modules series or explore all Cisco products.
40 Gbps per port uses FortyGigabitEthernet1/1/1 and FortyGigabitEthernet1/1/2 when QSFP+ optics are installed. 10 Gbps breakout mode turns one 40G port into four TenGigabitEthernet interfaces; port 1 starts at TenGigabitEthernet1/1/1 and port 2 starts at TenGigabitEthernet1/1/5. C9300-NM-2Q runs from Cisco IOS XE Everest 16.5.1a on C9300 SKUs. Hot swap is allowed, and the switch logs insertions or removals. When a 40G optic is used, the 10G interfaces remain visible but are not used. The 40G choices are QSFP-40G-SR-BD, QSFP-40G-SR4, QSFP-40G-LR4, QSFP-40G-ER4 and QSFP-H40G-CU1M. QSFP-4X10G-LR-S covers 4x10G optical breakout.
C9300-NM-2Q is offered in new sealed and certified refurbished condition. Certified refurbished units have connectors, cages, latch and faceplate inspected, optics bay recognition checked, and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 9300 chassis, free uplink slot, NM-BLANK-T1= removal, Cisco IOS XE 16.5.1a or later, and QSFP+ or breakout PIDs. Regional stock and RMA with advance replacement cover UK, EU, US and MEA, with PO accepted and Net-30 for government. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition, terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x 40G QSFP+ |
Fits | Catalyst 9300 |
Module Features | 40G QSFP+ uplinks; 4x10G breakout |
Slot | Front uplink network module slot |
Breakout | Each 40G port splits to 4 x 10G |
Minimum Software | Cisco IOS XE Everest 16.5.1a |
A large university deploys the C9300-NM-2Q on Catalyst 9300 switches as dual 40 Gigabit Ethernet uplinks between building distribution and core layers. This configuration consolidates high-density Wi-Fi, BYOD and IoT traffic into a single, resilient spine, eliminating bottlenecks during peak lecture and lab sessions. Outcome: sub-millisecond latency, 3× performance headroom and simplified campus expansion without forklift upgrades.
A nationwide retail chain migrates its point-of-sale and inventory applications to a private cloud. By installing the Catalyst 9300 2 × 40GE Network Module in access switches, each leaf node attains high-capacity uplinks to the spine layer. Benefit: 50% faster transaction processing, consistent SLA-grade connectivity and non-disruptive scaling across 500+ store locations.
A financial services firm integrates on-premise trading platforms with AWS and Azure to support high-frequency trading and analytics. The C9300-NM-2Q module on Catalyst 9300 switches delivers dual 40GE links over DWDM circuits to public cloud edge routers. Result: sub-millisecond round-trip times, 2× aggregate throughput and strict micro-segmentation for regulatory compliance.
An existing Catalyst 9300 stack needs 40G uplinks without moving to Catalyst 9300X hardware. C9300-NM-2Q adds two QSFP+ uplink slots to each chosen C9300 member. Count one module for every member that needs a 40G uplink and two Cisco QSFP+ optics for a fully populated module before the PO.
A mixed stack needs the same uplink module on the members that hand off traffic northbound. C9300-NM-2Q uses the Catalyst 9300 front uplink network module slot and runs from Cisco IOS XE Everest 16.5.1a. Match the release, module count and QSFP+ optic PIDs across the selected members before the PO.
A new Catalyst 9300 bill of materials needs modular 40G uplinks rather than fixed C9300L uplinks. C9300-NM-2Q occupies the network module slot and replaces the Type 1 blank. Count one blank or one network module for each switch, then count optics or 4x10G breakout cables by port before the PO.
Catalyst 9300X hosts
C9300-NM-2Q fits Catalyst 9300 SKUs only. Catalyst 9300X models take C9300X-NM-2C for two 100G/40G QSFP network-module ports.
Catalyst 9300L fixed uplinks
C9300-NM-2Q does not fit Catalyst 9300L. C9300L models use fixed uplinks, with no network module slot for this part in the chassis.
Native 25G SFP28 uplinks
C9300-NM-2Q uses QSFP+ 40G ports. Catalyst 9300 25G/10G/1G SFP28 uplinks use C9300-NM-2Y from the same network-module set.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Module | Ethernet | Supervisor/CPU Module | Network Module | Network Module |
| Data Rate | 40G | 1Gbps | 40Gbps | 10G | 25G |
| Form Factor | Plug-in Module | Modular | Modular | Plug-in Module | Plug-in Module |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 4 April 2017
The C9300-NM-2Q provides 2 ports of 40GE connectivity. It's an essential part of our network, offering high-speed performance and reliability.
Reviewed on the 11 April 2026
We use the C9300-NM-2Q for our high-bandwidth applications. It delivers exceptional speed and reliability, making it perfect for our network needs.
Reviewed on the 20 August 2019
The C9300-NM-2Q delivers excellent performance. With 2 40GE ports, it's perfect for high-demand networking and seamless integration.
Reviewed on the 14 March 2026
The C9300-NM-2Q offers fast, reliable performance. It's a great choice for handling large data volumes and improving our network's speed.
Reviewed on the 15 April 2024
The C9300-NM-2Q is ideal for expanding our network. It offers excellent performance, handling heavy traffic with ease.
Reviewed on the 18 July 2026
We use the C9300-NM-2Q for our high-bandwidth applications. It delivers exceptional speed and reliability, making it perfect for our network needs.
Reviewed on the 21 July 2026
The C9300-NM-2Q delivers excellent performance. With 2 40GE ports, it's perfect for high-demand networking and seamless integration.
Reviewed on the 18 November 2023
The C9300-NM-2Q offers fast, reliable performance. It's a great choice for handling large data volumes and improving our network's speed.
Reviewed on the 12 August 2020
The C9300-NM-2Q provides 2 ports of 40GE connectivity. It's an essential part of our network, offering high-speed performance and reliability.
Reviewed on the 26 July 2021
The C9300-NM-2Q is ideal for expanding our network. It offers excellent performance, handling heavy traffic with ease.
C9300-NM-2Q is the Cisco Catalyst 9300 2 x 40GE QSFP Network Module. It is a hot-swappable uplink network module with two 40G QSFP+ slots for Catalyst 9300 switches. C9300 marks the Catalyst 9300 family, NM marks network module, and 2Q marks two QSFP uplink ports.
C9300-NM-2Q fits Catalyst 9300 C9300 SKUs only. It does not fit Catalyst 9300X, Catalyst 9300L or Catalyst 9300LM models; Catalyst 9300X takes C9300X-NM-2C for two 100G/40G QSFP ports, and C9300L and C9300LM models use fixed uplinks. No supervisor or carrier is required.
Catalyst 9300 uses C9300-NM-4G, C9300-NM-4M, C9300-NM-8X, C9300-NM-2Q and C9300-NM-2Y in the modular uplink slot. C9300-NM-BLANK fills the slot when uplink ports are not required. Each modular switch takes one network module or blank in that slot.
C9300-NM-2Q has two 40G QSFP+ ports. A 40G QSFP+ optic presents FortyGigabitEthernet1/1/1 and FortyGigabitEthernet1/1/2. A 4x10G breakout cable turns each 40G port into four 10G interfaces, so the far end must match either 40G QSFP+ or 10G breakout cabling.
C9300-NM-2Q works with QSFP-40G-SR-BD, QSFP-40G-SR4, QSFP-40G-SR4-S, QSFP-40G-CSR4, QSFP-40G-LR4, QSFP-40G-LR4-S, QSFP-40G-ER4 and WSP-Q40GLR4L for 40G optics. The QSFP-H40G-CU1M, QSFP-H40G-CU3M, QSFP-H40G-CU5M and QSFP-4X10G-LR-S cable options cover direct-attach or breakout orders. Order one optic or cable per populated port.
A Catalyst 9300 takes one C9300-NM-2Q in the front uplink network module slot. The network module is hot-swappable, and an empty slot takes NM-BLANK-T1=. In a stack, count one module only for each member that needs modular uplinks, then count optics by populated port.
C9300-NM-2Q adds 40G QSFP+ uplinks to a modular Catalyst 9300. Its edge is 40G per port over 10G SFP+ network modules on the same host. It also gives breakout operation, with one 40G port split into four 10G interfaces when a 4x10G breakout cable is used.
C9300-NM-2Q starts with Cisco IOS XE Everest 16.5.1a as its first supported release on Catalyst 9300 C9300 SKUs. Catalyst 9300 1G fiber models start at Cisco IOS XE 16.11.1a, and Catalyst 9300 fixed-uplink models start at Cisco IOS XE 16.11.1b but do not take this module.
C9300-NM-2Q maps 40G port 1 to TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/4 in breakout mode. Port 2 maps to TenGigabitEthernet1/1/5 through TenGigabitEthernet1/1/8. With 40G optics, the 40G interfaces are configured and the displayed 10G interfaces are disregarded. The rule repeats by switch number in a stack.
C9300-NM-2Q= is the spare form of C9300-NM-2Q. The spare PID uses the same Catalyst 9300 2 x 40GE QSFP Network Module description, while the base PID is the module PID on this page. A Cisco-remanufactured -RF PID is separate from certified refurbished condition.
C9300-NM-2Q gives two 40G QSFP+ uplinks and 4x10G breakout per 40G port. C9300-NM-8X gives eight 10G/1G SFP+ uplinks on the same Catalyst 9300 host. Choose C9300-NM-2Q for 40G QSFP+ uplinks and C9300-NM-8X for more native 10G SFP+ ports.
C9300-NM-2Q uses two 40G QSFP+ ports. C9300-NM-2Y uses two 25G/10G/1G SFP28 ports on Catalyst 9300 switches. C9300-NM-2Q fits 40G QSFP+ handoffs and 4x10G breakout orders, while C9300-NM-2Y fits native 25G, 10G or 1G SFP-family uplinks.
C9300-NM-2Q fits Catalyst 9300 and gives two 40G QSFP+ ports. C9300X-NM-2C fits Catalyst 9300X and gives two 100G/40G QSFP ports. The choice follows the switch generation first, then the required 40G-only or 100G/40G port speed before the PO.
Cisco has not announced an end-of-sale date for C9300-NM-2Q. The part serves Catalyst 9300 C9300 SKUs and remains in the current Catalyst 9300 network-module set as of 2 November 2026.
ORM offers C9300-NM-2Q in new sealed and certified refurbished condition. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate are inspected, and every port links at rated speed with a Cisco transceiver. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days.