Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,895.20
$108.1594.3% off
Quantity:
C9300-NM-4M
Cisco C9300-NM-4M 4-Port 10G/mGig Copper Network Module for...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9300-NM-4M is a Cisco Catalyst 9300 4-port 10G/mGig copper Network Module for C9300 modular-uplink Catalyst 9300 switches. Its edge is four copper Multigigabit Ethernet ports that run 100M, 1G, 2.5G, 5G and 10G per port. It fits C9300 SKUs of the Catalyst 9300 Series, not C9300X, C9300L or C9300LM switches. This Cisco Catalyst 9300 network module seats in the front uplink network module slot and needs the higher host floor and Cisco IOS XE Fuji 16.8.1a. C9300-NM-4G stays at four 1G SFP slots; this module keeps four ports and moves the C9300 uplink bay to 10G/mGig copper.
C9300-NM-4M price for new stock is $374.85, a 80.2% saving from the Cisco list price of $1,895.20. C9300-NM-4M refurb price is $108.15. C9300-NM-4M is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9300-NM-4M for additional pricing. Browse the full Cisco C9300-NM Catalyst Network Modules series or explore all Cisco products.
10 Gbps per port is the top copper rate; 100 Mbps, 1 Gbps, 2.5 Gbps and 5 Gbps also negotiate on Multigigabit Ethernet links. Category 5e cabling carries 100M through 5G, Category 6 carries 10G to 55 m, and Category 6A carries 10G to 100 m. C9300-NM-4M presents TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/4 for configuration. Hot swap is allowed, and the uplink slot must hold a network module or NM-BLANK-T1= when uplink ports are not required. A Catalyst 9300 stack can have nine members; count one module for each member that needs these uplinks.
New sealed and certified refurbished conditions are offered for C9300-NM-4M. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate are inspected, the module seats and locks, is recognized by the host, and every port links at rated speed. Before the PO, confirm the C9300 Catalyst 9300 model, the free uplink slot, Cisco IOS XE release and copper cabling category. Regional stock and RMA cover UK, EU, US and MEA, with RMA with advance replacement, PO accepted and Net-30 for government. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition, terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x 100M/1G/2.5G/5G/10G copper |
Fits | Catalyst 9300 C9300 modular-uplink models |
Module Features | 10G/mGig copper per port |
Slot | Front uplink network module slot |
Hot Swap | Yes |
Minimum Software | Cisco IOS XE Fuji 16.8.1a |
In a global enterprise campus deploying over 2,000 Wi-Fi 6 access points, the Catalyst 9300 paired with the C9300-NM-4M module delivers four 2.5/5/10 Gbps uplinks to access point controllers. This high-density multi-gig connectivity ensures ultra-low latency for real-time collaboration, scales to support emerging applications, and future-proofs the wireless infrastructure for 802.11ax and beyond.
In a smart manufacturing facility powering 150 machine vision cameras and hundreds of IoT sensors, the C9300-NM-4M’s four multi-gigabit ports aggregate up to 40 Gbps of sensor and video data. This robust bandwidth supports real-time quality inspection, predictive maintenance analytics, and closed-loop control, boosting production efficiency by 20% and minimizing unplanned downtime by 30%.
In a regional branch office supporting cloud-native applications and SD-WAN, the Catalyst 9300 equipped with C9300-NM-4M offers four resilient 1/2.5/5/10 Gbps uplinks to dual SD-WAN routers. This configuration provides scalable bandwidth for SaaS and IaaS services, simplifies overlay management, enforces segmentation policies, and reduces WAN costs by 25% while ensuring consistent application performance.
A buyer has a Catalyst 9300 stack member with a failed copper mGig uplink module and the chassis still needs four 100M to 10G uplink ports. The replacement must match the C9300 modular-uplink switch, the front uplink slot and the running Cisco IOS XE floor before the PO.
A buyer has a C9300 access switch that needs copper uplinks above 1G without moving to optical SFP slots. The four ports run 100M, 1G, 2.5G, 5G and 10G, so the order must match cable category, link distance and far-end speed.
A buyer is standardizing uplinks across a Catalyst 9300 stack with several members needing the same copper mGig handoff. A stack can have nine members, and each uplinking member needs its own network module in its own front slot before the uplink design is counted.
C9300X mGig uplinks
C9300-NM-4M fits C9300 SKUs only. C9300X switches use C9300X-NM modules; choose C9300X-NM-8M for eight Multigigabit Ethernet slots.
25G uplink ports
C9300-NM-4M tops out at 10 Gbps per copper port. A C9300 build that needs 25G SFP28 uplinks takes C9300-NM-2Y.
Eight 10G SFP+ ports
C9300-NM-4M has four copper mGig ports. A C9300 build that needs eight 10G/1G SFP+ slots takes C9300-NM-8X.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Module | SFP+ | Ethernet Module | Supervisor Card |
| Form Factor | Plug-in Module | Modular | Modular | Modular |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 29 January 2021
This network module has significantly enhanced our network's capability. The C9300-NM-4M is easy to deploy and offers solid, high-speed connections.
Reviewed on the 27 August 2021
The C9300-NM-4M is a great module for Multi-Gigabit ports. It's reliable, easy to set up, and provides solid performance for our network.
Reviewed on the 5 August 2023
The C9300-NM-4M is perfect for expanding our network. It provides 4 ports of Multi-Gigabit connectivity, delivering stable and reliable performance.
Reviewed on the 22 January 2018
The C9300-NM-4M has been reliable and efficient. It provides excellent connectivity for our high-speed applications and integrates well with our Cisco system.
Reviewed on the 22 October 2018
We use the C9300-NM-4M to expand our network. It's been a reliable, high-performance solution for our Multi-Gigabit Ethernet needs.
C9300-NM-4M is the Cisco Catalyst 9300 4 x 10G/mGig copper Network Module. It adds four copper Multigigabit Ethernet uplink ports to C9300 Catalyst 9300 modular-uplink switches. NM marks a network module, 4M marks four Multigigabit ports, and the base PID differs from the C9300-NM-4M= spare form.
C9300-NM-4M fits C9300 Catalyst 9300 modular-uplink models C9300-24T, C9300-24P, C9300-24U, C9300-24UX, C9300-24UB, C9300-24UXB, C9300-24H, C9300-24S, C9300-48T, C9300-48P, C9300-48U, C9300-48UXM, C9300-48UN, C9300-48UB, C9300-48H and C9300-48S. It does not fit C9300X, C9300L or C9300LM switches.
A Catalyst 9300 C9300 modular-uplink switch uses C9300-NM-4M for four copper mGig uplinks. The same C9300 network module table also gives C9300-NM-4G, C9300-NM-8X, C9300-NM-2Q and C9300-NM-2Y. Match the PID to the required copper, SFP, SFP+, QSFP+ or SFP28 uplink format.
C9300-NM-4M has four copper Multigigabit Ethernet ports. Each port runs 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps or 10 Gbps. The far end must negotiate the same Ethernet speed, and Multigigabit ports use full duplex rather than half duplex mode.
One C9300-NM-4M fits in the front uplink network module slot of a C9300 Catalyst 9300 switch. The slot is hot-swappable. If the switch does not need uplink ports, the slot must hold a blank module, and NM-BLANK-T1= is the spare blank PID to order.
C9300-NM-4M adds four copper Multigigabit Ethernet uplink ports with the 10G/mGig edge over the four-port 1G SFP module. It gives the C9300 switch copper 100M, 1G, 2.5G, 5G and 10G uplink choices in the same front network module bay.
C9300-NM-4M needs Cisco IOS XE Fuji 16.8.1a as its first supported release, then the higher host floor where the chassis model starts later. C9300-24H and C9300-48H start at Cisco IOS XE Amsterdam 17.2.1, while C9300-24S and C9300-48S start at Cisco IOS XE Gibraltar 16.11.1.
C9300-NM-4M copper mGig ports require cabling matched to the link speed. Category 5e carries 100M, 1G, 2.5G and 5G. Category 6 carries 10G to 55 m, and Category 6A carries 10G to 100 m. Use full duplex on these Multigigabit ports.
C9300-NM-4M is counted per stack member, not per stack. A Catalyst 9300 stack can have nine members, and each member that needs four copper mGig uplinks needs its own module in its own front uplink slot. Match the software floor across the stack before insertion.
C9300-NM-4M= is the spare form of C9300-NM-4M. The base PID and the spare PID describe the same Catalyst 9300 4 x 10G/mGig copper Network Module role. Use the spare form only when the PO requires a spare-equipment PID rather than the base equipment PID.
C9300-NM-4M has four copper Multigigabit Ethernet ports that run 100M to 10G, while C9300-NM-4G has four 1G SFP slots. Choose C9300-NM-4M for copper mGig uplinks on C9300 switches; choose C9300-NM-4G for 1G SFP uplinks.
C9300-NM-8X gives eight SFP+ module slots and each port runs 1G or 10G. C9300-NM-4M gives four copper mGig ports with 100M, 1G, 2.5G, 5G and 10G rates. The 8X module fits port-count and optics requirements; the 4M module fits copper mGig requirements.
C9300-NM-2Y reaches 25G on two SFP28 slots and also takes SFP+ or SFP modules for 10G or 1G. C9300-NM-4M reaches 10G on four copper mGig ports. The 2Y module fits 25G optical uplinks; the 4M module fits four copper mGig handoffs.
Cisco has not announced an end-of-sale date for C9300-NM-4M. The module serves C9300 SKUs of the Catalyst 9300 Series with a front uplink network module slot. C9300X, C9300L and C9300LM switches take different uplink hardware or fixed uplinks.
ORM supplies C9300-NM-4M new sealed and certified refurbished. Cisco Enhanced Limited Lifetime hardware warranty applies to the Catalyst 9300 family. ORM warranties are new — up to 3-year extended and certified refurbished — up to 1 year, with 30 days on every condition; terms apply.