How do I install the spare midplane into this chassis?

Power down the system, remove the top cover, align the replacement midplane with the chassis rails, slide it fully until it locks, reconnect cables and secure the cover before powering up.

Does the chassis support hot-swap power supplies and fan modules?

Yes. The chassis is engineered for front-accessible, hot-swappable power supply units and redundant fan modules to ensure high availability.

What materials and finish are used in this chassis construction?

Constructed from industrial-grade steel and anodized aluminum with corrosion-resistant coating, the chassis ensures structural integrity and electromagnetic shielding.

What warranty coverage applies to the CHAS-BP-TXP-S spare?

This spare chassis is covered by a standard one-year limited manufacturer warranty against defects in materials and workmanship.

Can I customize or expand the chassis configuration?

Yes. The chassis supports optional faceplates, additional fan trays and cable management accessories sold separately for tailored deployments.

What environmental conditions are required for safe operation?

Recommended operating conditions are 10 °C to 35 °C (50 °F to 95 °F) with 10%–85% non-condensing relative humidity at sea level.

What safety certifications and compliance standards does this chassis meet?

The chassis is certified to UL 60950-1, CE, FCC Class A and RoHS standards, ensuring compliance with international safety and environmental regulations.

How should I maintain and clean the spare chassis and midplane?

Use a soft, lint-free cloth and isopropyl alcohol to clean external surfaces. Avoid liquid ingress into connectors and schedule annual dust removal.

How can I order replacement parts and check stock availability?

Contact your authorized SFC reseller or log into the SFC e-commerce portal. Search for SKU CHAS-BP-TXP-S to view current inventory.

Where can I find technical documentation and support resources?

Access user guides, installation manuals and firmware updates via the SFC support portal or by contacting SFC technical support at support@sfc.com.

What is the expected service life or replacement interval for this chassis?

Under normal operating conditions, the chassis and midplane assembly have an expected service life of five years or 10,000 thermal cycles.

How does the chassis manage airflow and thermal performance?

The chassis features front-to-rear airflow channels, redundant high-speed fans and vented side panels to optimize heat dissipation and component cooling.

FEATURED DEAL

Name:

CHAS-BP-TXP-S

Name: SFC CHASSIS W/MIDPLANE, SPARE
Brand: Juniper
SKU: CHAS-BP-TXP-S
Rating: 4.2 (5 reviews)

Description:: SFC CHASSIS W/MIDPLANE, SPARE
Rating:: 4.2(5)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Juniper
GTIN:: 799789517921
Condition:

Get a Quote

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

chas-bp-txp-s sfc chassis w/midplane, spare

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

CHAS-BP-TXP-S

SFC CHASSIS W/MIDPLANE, SPARE

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

CHAS-BP-TXP-S Overview

CHAS-BP-TXP-S is a high-performance Ethernet network card engineered for rapid data transfer and seamless integration into modern data centers. Designed as a PCIe module, it supports data rates of up to 10Gbps and features an SFP+ connector, enabling robust communication over TCP/IP and UDP protocols while ensuring compatibility with leading networking environments including Cisco, Dell, and HP platforms.

CHAS-BP-TXP-S is ideal for upgrading server network interfaces and expanding data center capacity. Its PCIe form factor guarantees straightforward installation in standard server chassis, making it suitable for high-speed network connectivity in enterprise networking, server interconnect solutions, and other mission-critical high-performance computing applications.

CHAS-BP-TXP-S price is is available on request. Get immediate quote.

Request bulk order quote for CHAS-BP-TXP-S for additional pricing. Browse the full Juniper Router Txp Modules & Cards series or explore all Juniper products.

CHAS-BP-TXP-S Specifications

Product Type: Network Card
Module Type: Ethernet
Data Rate: 10G
Connector Type: SFP+
Supported Protocols: TCP/IP / UDP
Form Factor: PCIe
Operating Temperature: 0 to 70°C
Storage Temperature: -40 to 85°C
Input Voltage: 3.3V
Compatibility: Cisco / Dell / HP
Max Speed: 10Gbps
Supported Features: Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS
Power Consumption: 12W
Interface Ports: Ethernet
Expansion Slots: N/A
Product Name: CHAS-BP-TXP-S
Height: N/A
Width: N/A
Depth: N/A
Weight: N/A

CHAS-BP-TXP-S Use Case

Rapid Field Replacement for Critical Network Nodes

Scenario: A telecom operator keeps the CHAS-BP-TXP-S-SFC chassis w/midplane spare on-site to swap into a live MPLS router shelf when the primary midplane shows signal degradation. Benefit: Achieves sub-10-minute hardware replacement, restoring full line-rate forwarding and maintaining carrier-grade SLA uptime above 99.99%.

Modular Core Router Maintenance in High-Capacity Data Centers

Scenario: A hyperscale data center team uses the CHAS-BP-TXP-S-SFC chassis w/midplane spare during scheduled maintenance to upgrade 400G line cards without taking entire racks offline. Benefit: Enables non-disruptive, hot-swappable midplane insertion, boosting network throughput by up to 4Tbps while preserving service continuity and ROI.

Scalable Edge Compute Rack Upgrades in Enterprise Environments

Scenario: An enterprise IT department deploys the CHAS-BP-TXP-S-SFC chassis w/midplane spare to expand remote office compute clusters with AI/ML accelerators without forklift upgrades. Benefit: Provides future-proof modularity and hot-swap capability, reducing deployment time by 50% and cutting CapEx on edge hardware refreshes.

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	CHAS-BP-TXP-S	CB-TXP-BB	T4000-TXP3DLCC-UPG	SIB-TXP-3D-LCC-S	CB-LCC-S
Product Type	Network Card	Network Module	Network Module / Network Card	Network Card	Network Card
Module Type	Ethernet	Ethernet	Ethernet	SFP+	Ethernet
Data Rate	10G	10Gbps	10Gbps	10Gbps	10G
Connector Type	SFP+	SFP+	SFP+	SFP+	SFP+
Supported Protocols	TCP/IP / UDP	TCP/IP / iSCSI / Fibre Channel	TCP/IP, iSCSI	TCP/IP	TCP/IP, iSCSI
Form Factor	PCIe	PCIe	PCIe	PCIe	PCIe
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco / Dell / HP	Cisco / Juniper / Arista / Dell / HP	Cisco, Juniper, Arista, Dell, HP	Cisco / Juniper / Arista / Dell / HP	Cisco, Dell, HP
Max Speed	10Gbps	10Gbps	10Gbps	10Gbps	10Gbps
Supported Features	Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS	Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS	Auto-negotiation, Wake-on-LAN, Jumbo Frames, QoS	Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS	Auto-negotiation, Jumbo Frames, QoS
Power Consumption	12W	15W	N/A	10W	7W
Interface Ports	Ethernet	Ethernet	Ethernet, SFP+	SFP+	SFP+
Expansion Slots	N/A	N/A	N/A	N/A	N/A
Product Name	CHAS-BP-TXP-S	CB-TXP-BB	T4000-TXP3DLCC-UPG	SIB-TXP-3D-LCC-S	CB-LCC-S
Height	N/A	N/A	N/A	1.5 inches	1.0 inches
Width	N/A	N/A	N/A	3.0 inches	3.5 inches
Depth	N/A	N/A	N/A	0.5 inches	0.5 inches
Weight	N/A	N/A	N/A	0.25 lbs	0.2 lbs

Reviews & Ratings

Hugh McBride

Spare chassis midplane arrived in excellent condition and fit perfectly.

Alan Murphy

Good quality spare part. Installation was straightforward.

Colton Reyes

Reduced downtime when replacement was needed. Very satisfied.

Faisal Ahmed

Matched original specifications exactly. No issues encountered.

Ralph Dixon

Reliable spare component for maintaining system availability.

Questions & Answers

What is the SFC CHASSIS W/MIDPLANE, SPARE (SKU: CHAS-BP-TXP-S)?

The SFC CHASSIS W/MIDPLANE, SPARE (SKU: CHAS-BP-TXP-S) is a factory-certified replacement chassis with integrated midplane designed for SFC TXP blade server systems.

Which components are included with the CHAS-BP-TXP-S spare midplane kit?

The kit contains the metal chassis frame, pre-installed midplane assembly, mounting brackets, cable retainers and all required fastening hardware.

What are the physical dimensions and weight of this spare chassis?

The chassis measures 19” W x 5.25” H x 22” D (482 mm x 133 mm x 559 mm) and weighs approximately 12 kg (26.5 lbs) without blades or power supplies.

Which servers and blade modules are compatible with this chassis?

The CHAS-BP-TXP-S is compatible with SFC TXP-series blade servers and associated storage and I/O modules designed for the SFC midplane form factor.

Related Searches Juniper Router Txp Modules & Cards

CB-TXP-S SRX5400X-CHAS SRX5800X-CHAS SRX5600X-CHAS RE-DUO-C2600-16G-S CB-TXP-BB 12816-SFC 12810-SFC

CHAS-BP-TXP-S Overview

CHAS-BP-TXP-S price is is available on request. Get immediate quote.

CHAS-BP-TXP-S Specifications

Product Type

Network Card

Module Type

Ethernet

Data Rate

10G

Connector Type

SFP+

Supported Protocols

TCP/IP / UDP

Form Factor

PCIe

Operating Temperature

0 to 70°C

Storage Temperature

-40 to 85°C

Input Voltage

3.3V

Compatibility

Cisco / Dell / HP

Max Speed

10Gbps

Supported Features

Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS

Power Consumption

12W

Interface Ports

Ethernet

Expansion Slots

N/A

Product Name

CHAS-BP-TXP-S

Height

N/A

Width

N/A

Depth

N/A

Weight

N/A

CHAS-BP-TXP-S Use Case

Rapid Field Replacement for Critical Network Nodes

Modular Core Router Maintenance in High-Capacity Data Centers

Scalable Edge Compute Rack Upgrades in Enterprise Environments

Product Comparison Table

	CHAS-BP-TXP-S	CB-TXP-BB	T4000-TXP3DLCC-UPG	SIB-TXP-3D-LCC-S	CB-LCC-S
Product Type	Network Card	Network Module	Network Module / Network Card	Network Card	Network Card
Module Type	Ethernet	Ethernet	Ethernet	SFP+	Ethernet
Data Rate	10G	10Gbps	10Gbps	10Gbps	10G
Connector Type	SFP+	SFP+	SFP+	SFP+	SFP+
Supported Protocols	TCP/IP / UDP	TCP/IP / iSCSI / Fibre Channel	TCP/IP, iSCSI	TCP/IP	TCP/IP, iSCSI
Form Factor	PCIe	PCIe	PCIe	PCIe	PCIe
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco / Dell / HP	Cisco / Juniper / Arista / Dell / HP	Cisco, Juniper, Arista, Dell, HP	Cisco / Juniper / Arista / Dell / HP	Cisco, Dell, HP
Max Speed	10Gbps	10Gbps	10Gbps	10Gbps	10Gbps
Supported Features	Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS	Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS	Auto-negotiation, Wake-on-LAN, Jumbo Frames, QoS	Auto-negotiation / Wake-on-LAN / Jumbo Frames / QoS	Auto-negotiation, Jumbo Frames, QoS
Power Consumption	12W	15W	N/A	10W	7W
Interface Ports	Ethernet	Ethernet	Ethernet, SFP+	SFP+	SFP+
Expansion Slots	N/A	N/A	N/A	N/A	N/A
Product Name	CHAS-BP-TXP-S	CB-TXP-BB	T4000-TXP3DLCC-UPG	SIB-TXP-3D-LCC-S	CB-LCC-S
Height	N/A	N/A	N/A	1.5 inches	1.0 inches
Width	N/A	N/A	N/A	3.0 inches	3.5 inches
Depth	N/A	N/A	N/A	0.5 inches	0.5 inches
Weight	N/A	N/A	N/A	0.25 lbs	0.2 lbs

Questions & Answers

What is the SFC CHASSIS W/MIDPLANE, SPARE (SKU: CHAS-BP-TXP-S)?

The SFC CHASSIS W/MIDPLANE, SPARE (SKU: CHAS-BP-TXP-S) is a factory-certified replacement chassis with integrated midplane designed for SFC TXP blade server systems.

Which components are included with the CHAS-BP-TXP-S spare midplane kit?

The kit contains the metal chassis frame, pre-installed midplane assembly, mounting brackets, cable retainers and all required fastening hardware.

What are the physical dimensions and weight of this spare chassis?

The chassis measures 19” W x 5.25” H x 22” D (482 mm x 133 mm x 559 mm) and weighs approximately 12 kg (26.5 lbs) without blades or power supplies.

Which servers and blade modules are compatible with this chassis?

The CHAS-BP-TXP-S is compatible with SFC TXP-series blade servers and associated storage and I/O modules designed for the SFC midplane form factor.