United States
Q
What processors are compatible with HPE ProLiant DL20 Gen10?
A
HPE ProLiant DL20 Gen10 supports Intel Xeon E-2200 and E-2300 series processors, ranging from dual-core to octa-core models for balanced compute and efficiency.
Q
Can I upgrade the CPU in HPE DL20 Gen10 and which Intel Xeon models are supported?
A
Yes; the DL20 Gen10 uses an LGA 1151 v2 socket that supports seamless upgrades to Intel Xeon E-2200 and E-2300 series CPUs.
Q
How many processor cores does the HPE DL20 Gen10 support?
A
The server accommodates up to eight cores per processor, delivering scalable performance for demanding workloads.
Q
What is the maximum thermal design power (TDP) per processor socket?
A
Each processor socket supports a maximum TDP of 95 W, ensuring reliable operation under peak compute loads.
Q
Is the HPE DL20 Gen10 a single-socket or dual-socket server?
A
The HPE DL20 Gen10 is a single-socket server, simplifying management while optimizing cost and power consumption.
Q
Does HPE DL20 Gen10 support Intel Turbo Boost Technology?
A
Yes; supported Intel Xeon processors feature Turbo Boost Technology to automatically increase clock speeds under heavy workloads.
Q
What virtualization features are available on DL20 Gen10 processors?
A
Supported Intel Xeon CPUs include VT-x and VT-d virtualization technologies to enhance VM density, isolation, and I/O performance.
Q
Does HPE DL20 Gen10 support ECC memory?
A
Yes; the DL20 Gen10 fully supports ECC UDIMM memory, ensuring data integrity and system reliability.
Q
How many PCIe lanes are provided by the processor in HPE DL20 Gen10?
A
Each supported processor provides up to 16 PCIe 3.0 lanes for flexible expansion of storage and networking adapters.
Q
What is the power consumption of HPE DL20 Gen10 under maximum load?
A
A fully configured DL20 Gen10 with an 8-core CPU consumes approximately 150 W to 200 W under maximum load, depending on peripheral configurations.
Q
What cooling solutions are recommended for high-TDP processors in DL20 Gen10?
A
HPE recommends high-efficiency heat sinks and front-to-back airflow to maintain stable temperatures on processors up to 95 W TDP.
Q
How do I verify CPU compatibility before purchasing for HPE DL20 Gen10?
A
Use the HPE QuickSpecs and Server Sizing Tool to confirm CPU socket compatibility, firmware requirements, and supported processor lists.
Q
How do I install or replace the CPU in HPE DL20 Gen10?
A
Power off the server, remove the top cover, unlock the CPU socket lever, install the new CPU with proper orientation, apply thermal grease, and reinstall the heat sink.
Q
Can I use Intel vPro technology with HPE DL20 Gen10?
A
Yes; the DL20 Gen10 supports Intel vPro on compatible Xeon E-series CPUs for advanced remote management and hardware-based security features.
Q
Which processor configuration is best for virtualization workloads on DL20 Gen10?
A
An Intel Xeon E-2300 octa-core processor with VT-x, VT-d, and 95 W TDP offers the optimal balance of core count, clock speed, and energy efficiency for virtualization.
