Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
CW9162I-MR
Cisco Meraki Catalyst 9162 Access Point, Wi-Fi 6E, Tri-Band...
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
CW9162I-MR is the Cisco Catalyst 9162I cloud-managed indoor access point for Meraki Dashboard deployments, built around Wi-Fi 6E tri-band service and integrated omnidirectional antennas. The -MR suffix identifies the Meraki management mode rather than a regulatory domain, while the I model variant identifies the internal-antenna hardware. Three client-serving 2x2:2 radios operate across 2.4 GHz, 5 GHz, and 6 GHz, with a dedicated tri-band scanning radio for Air Marshal WIDS/WIPS, spectrum analysis, and location analytics. The compact 7.8 x 7.8 x 1.7 in enclosure targets ceiling, wall, and desktop placement in indoor office and branch WLAN designs where a single 2.5G multigigabit uplink feeds cloud-managed access. Country approval and 6 GHz operation follow the configured operating country and local certification status rather than a visible regulatory-domain code in this SKU.
3.9 Gbps maximum aggregate over-the-air frame rate spans the 6 GHz 2x2:2, 5 GHz 2x2:2, and 2.4 GHz 2x2:2 radios, with IEEE 802.11ax, OFDMA, BSS coloring, Target Wake Time, 1024-QAM, MU-MIMO, SU-MIMO, maximal ratio combining, and 802.11ax beamforming in the radio stack. CW9162I-MR uses peak antenna gain values of 4 dBi at 2.4 GHz and 5 dBi at 5 GHz and 6 GHz. A 100/1000/2.5G BASE-T RJ-45 Ethernet port carries the network uplink, while USB 2.0 supplies a 4.5W host interface under full power. Channel support covers 20 MHz at 2.4 GHz, 20/40/80 MHz at 5 GHz, and 20/40/80/160 MHz at 6 GHz for Wi-Fi 6E client service. Full function runs on 802.3at PoE+, 802.3bt PoE, or 12V DC input; 802.3af operation reduces the 5 GHz and 6 GHz radios to 1x1, limits Ethernet to 1G, disables the 2.4 GHz client radio, and turns USB off. System resources include 2048 MB DRAM and 1024 MB flash for the access point software image.
CW9162I-MR fits Meraki-managed WLAN cells in offices, small sites, shared work areas, and distributed branches that need 2.4 GHz legacy support, 5 GHz client capacity, and 6 GHz Wi-Fi 6E spectrum from one indoor AP. Meraki Dashboard handles configuration, monitoring, Air Marshal security workflows, firmware updates, RF optimization, Layer 7 traffic shaping, guest access, and location analytics; Meraki-mode operation requires a Meraki access point license. The same Catalyst 9162 platform also supports Catalyst 9800 WLC and Cisco DNA Center management when deployed in the appropriate management mode. AIR-AP-BRACKET-2 is bundled with the access point for ceiling and wall installation, while power injectors and the 12V adapter remain separate options. Security and mobility functions include WPA2, WPA3, Enhanced Open, 802.1X, AES encryption, PMK, OKC, 802.11r, VLAN tagging, and IPsec VPN tunneling. Operating limits of 32 to 122 F, 10% to 90% noncondensing humidity, and 0.93 kg weight define controlled indoor placement.
CW9162I-MR price is is available on request. Get immediate quote.
Request bulk order quote for CW9162I-MR for additional pricing. Browse the full Cisco Catalyst Wifi 6E Access Points series or explore all Cisco products.
Network teams place CW9162I-MR at the indoor access layer for small sites and distributed offices that need one AP to serve 2.4 GHz, 5 GHz, and 6 GHz clients. The 2.5G BASE-T uplink connects into the local access switch, while Meraki Dashboard applies SSIDs, VLAN tags, guest isolation, and Layer 7 traffic policies. Integrated internal antennas keep ceiling and wall placements contained within the room plan. The site gains tri-band Wi-Fi 6E service with central policy control and less RF staging per branch.
CW9162I-MR sits in Meraki-managed WLANs where centralized operations matter more than local controller staging. The access point checks into Dashboard, receives configuration, reports client health, and follows scheduled firmware updates across distributed networks. Air Marshal, spectrum analysis, and location analytics run on the dedicated scanning radio while client radios remain assigned to service. Engineers use Dashboard telemetry to isolate RF interference, roaming issues, and policy mismatches. The management plane gains consistent visibility across indoor AP fleets without separate site-level configuration work.
Infrastructure architects deploy CW9162I-MR in indoor cells where existing 2.4 GHz and 5 GHz service requires a 6 GHz overlay for Wi-Fi 6E clients. 2x2:2 radios across all three bands distribute client groups by capability, while 160 MHz 6 GHz channels support higher-throughput endpoints under local certification rules. The 802.3at full-power profile preserves 2.5G Ethernet and USB operation. The cell gains cleaner band segmentation, predictable wired uplink capacity, a documented power model for AP switch planning, and fewer RF compromises during refresh work.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| CW9162I-MR |  CW9166I-MR |  CW9164I-MR | |
|---|---|---|---|
| Product Type | Wireless Access Point / Indoor Access Point | Wireless Access Point / Indoor Access Point | Wireless Access Point / Indoor Access Point |
| Wireless Type | Access Point | Access Point | Access Point |
| Wi-Fi Standard | Wi-Fi 6E | Wi-Fi 6E | Wi-Fi 6E |
| Frequency Bands | Tri-Band | Tri-Band | Tri-Band |
| Data Rate | 3.9 Gbps aggregate | 7.78 Gbps aggregate | 7.49 Gbps aggregate PHY |
| Connector Type | RJ-45 | RJ-45 | RJ-45 |
| Antenna Type | Internal / Omnidirectional | Internal / Omnidirectional | Internal / Omnidirectional |
| Antenna Gain | 4 dBi 2.4 GHz; 5 dBi 5/6 GHz | 3 dBi 2.4GHz; 5 dBi 5GHz; 4 dBi 6GHz | 3 dBi 2.4 GHz; 5 dBi 5 GHz; 4 dBi 6 GHz |
| MIMO Technology | MU-MIMO | MU-MIMO | MU-MIMO |
| Beamforming | Beamforming Supported | Beamforming Supported | Beamforming Supported |
| Mounting Options | Ceiling Mount / Wall Mount / Desk Mount | Ceiling Mount / Wall Mount / Pole Mount / Desk Mount | Ceiling Mount / Wall Mount / Desk Mount |
| Power Supply | PoE / PoE Plus / 802.3bt PoE / AC Adapter / DC | PoE Plus / 802.3bt PoE / DC | PoE Plus / 802.3bt PoE / DC |
| Ethernet Port | 1 x 100/1000/2.5G BASE-T RJ-45 | 1 x 100M/1G/2.5G/5G RJ-45 | 1 x 100M/1G/2.5G BASE-T RJ-45 |
| Management Features | Cloud Dashboard / Controller-Managed | Cloud Dashboard / Controller-Managed | Cloud Dashboard |
| Security Features | WPA2 / WPA3 / 802.1X / Enhanced Open | WPA2 / WPA3 / 802.1X / Enhanced Open | WPA2 / WPA3 / 802.1X / Enhanced Open |
| Compliance | Safety: UL 2043 / EMC: FCC Part 15B / Radio: FCC 15C, EN 300 328 / Wi-Fi: Wi-Fi 6E, WPA3, BLE | Safety: UL 2043 / Radio: Wi-Fi 6E; WPA3-R3; BLE | Safety: UL 2043; IEC 62368-1 / EMC: FCC Part 15B / Radio: FCC Part 15C; EN 300 328 |
| Memory | 2048 MB DRAM; 1024 MB flash | 2048 MB DRAM; 1024 MB flash | 2048 MB DRAM; 1024 MB flash |
| Product Name | Cisco Catalyst CW9162I Cloud Managed 802.11ax Compatible AP | Meraki CW9166I Cloud Managed Omnidirectional 802.11ax Compatible AP | Meraki CW9164I cloud-managed 802.11ax compatible AP |
| Height | 1.7 in | 2.2 in | 2.2 in |
| Width | 7.8 in | 9.5 in | 9.5 in |
| Depth | 7.8 in | 9.5 in | 9.5 in |
| Weight | 0.93 kg (2.05 lb) | 1.60 kg | 1.60 kg (3.54 lb) |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Stable tri-band coverage and straightforward Meraki Dashboard setup across our branch offices.
The 2.5G uplink and Wi-Fi 6E radios handled dense conference areas well.
Internal antennas made ceiling placement clean, with useful RF analytics from Dashboard.
Good cloud-managed AP for smaller sites needing 6 GHz client support.
802.3at power kept full radio function available without special cabling changes.
Setup was smooth after license assignment, and client roaming behavior stayed consistent.
Useful AP for Meraki fleets, though power planning needed careful PoE checks.
CW9162I-MR is a Cisco Meraki Catalyst 9162I indoor wireless access point for cloud-managed Wi-Fi 6E deployments. It uses integrated internal omnidirectional antennas, three 2x2:2 client-serving radios across 2.4 GHz, 5 GHz, and 6 GHz, and a 2.5G multigigabit Ethernet uplink. The SKU is intended for Meraki Dashboard management and requires a Meraki access point license.
CW9162I-MR identifies the Cisco Catalyst 9162I hardware with Meraki management mode. The CW9162I portion indicates the Catalyst 9162I indoor internal-antenna access point, while the -MR suffix identifies the Meraki cloud-managed version. Cisco ordering guidance separates -MR cloud SKUs from regulatory-domain -x SKUs used for on-premises management ordering.
CW9162I-MR is a wireless access point, not a controller, antenna, switch, router, or standalone license. It installs at the WLAN access layer and serves wireless clients through Wi-Fi 6E radios. The unit also includes a dedicated scanning radio, a Bluetooth Low Energy radio, a USB 2.0 interface, and a single 100/1000/2.5G BASE-T Ethernet uplink.
CW9162I-MR sits in the Cisco Catalyst 9160 Wi-Fi 6E access point family as the 2x2+2x2+2x2 internal-antenna Meraki-managed model. It is positioned below higher-radio models such as CW9164I-MR and CW9166I-MR, which provide more spatial streams. It suits general-purpose indoor WLAN cells that need cloud-managed tri-band Wi-Fi 6E.
CW9162I-MR supports Wi-Fi 6E through IEEE 802.11ax operation across 2.4 GHz, 5 GHz, and 6 GHz radios. Cisco also lists 802.11a/b/g/n/ac compatibility for previous client generations. The 6 GHz radio operates where local certification and configured country settings allow the band, so regional approval remains part of design validation.
CW9162I-MR uses tri-band client access radios for 2.4 GHz, 5 GHz, and 6 GHz service. The access point also includes a tri-band scanning radio for Air Marshal WIDS/WIPS, spectrum analysis, and location analytics, plus a 2.4 GHz Bluetooth Low Energy radio. The design separates client service from RF monitoring work.
CW9162I-MR provides a maximum aggregate over-the-air frame rate of about 3.9 Gbps across its tri-radio Wi-Fi 6E design. Cisco describes the radio architecture as 2x2:2 on 6 GHz, 2x2:2 on 5 GHz, and 2x2:2 on 2.4 GHz. Actual client throughput depends on channel width, RF conditions, client capability, and power mode.
CW9162I-MR requires 802.3at PoE+ or 802.3bt PoE for full function, and it also supports 12V DC input. Cisco documents a reduced 802.3af mode where 5 GHz and 6 GHz operate as 1x1, Ethernet falls to 1G, USB turns off, and the 2.4 GHz client radio is disabled.
Cisco does not publish a fixed maximum client count for CW9162I-MR in the datasheet. Capacity planning should use the 2x2:2 tri-band radio design, channel widths, application mix, airtime demand, and Meraki Dashboard telemetry rather than a single client limit. The access point is described for general-purpose and smaller-site indoor deployments.
CW9162I-MR ships as the Meraki cloud-managed version and is managed through Meraki Dashboard with automatic firmware updates, monitoring, configuration, RF optimization, and remote diagnostics. Cisco also documents Catalyst 9162 platform support for Catalyst 9800 WLC and Cisco DNA Center in the appropriate management mode, with licensing and migration requirements controlling that operational path.
CW9162I-MR is used for indoor wireless access where a site needs Wi-Fi 6E, Meraki Dashboard management, integrated antennas, and a 2.5G wired uplink. Common network roles include branch access WLANs, office ceiling deployments, shared work areas, and smaller distributed locations that need centralized configuration, guest access, RF monitoring, and security policy control.
CW9162I-MR fits smaller and general-purpose indoor wireless environments rather than very high-density large-venue cells. Its 2x2:2 radios across 2.4 GHz, 5 GHz, and 6 GHz support tri-band Wi-Fi 6E service for offices, branches, and shared indoor spaces. Larger or denser designs often evaluate CW9164I-MR or CW9166I-MR for additional radio capacity.
CW9162I-MR suits indoor 6 GHz overlay projects where existing 2.4 GHz and 5 GHz WLAN service needs Wi-Fi 6E expansion. The 6 GHz 2x2:2 radio supports 20, 40, 80, and 160 MHz channel operation. Network planners still need country approval checks because Cisco notes that 6 GHz operation depends on regional certification and software support.
CW9162I-MR includes a dedicated tri-band scanning radio for Air Marshal WIDS/WIPS, spectrum analysis, RF analytics, and location functions. This radio monitors the RF environment while the client-serving radios remain available for WLAN access. Security features also include WPA2, WPA3, Enhanced Open, 802.1X, guest isolation, AES encryption, and Cisco ISE integration.
CW9162I-MR is aligned with Meraki Dashboard for cloud management and Meraki access point licensing. Cisco documentation also lists Catalyst 9162 Series support for Catalyst 9800 Series Wireless Controllers and Cisco DNA Center in supported management modes. Related integrations include Cisco Identity Services Engine, Cisco Spaces, Meraki Health, Systems Manager, and Dashboard APIs.
Yes, CW9162I-MR requires a Meraki access point license for operation in Meraki Dashboard mode. Cisco ordering guidance notes that 9160 access points shipping with Meraki Management Mode require a Meraki license to operate with Dashboard or to migrate to Cisco DNA Management Mode. License term and tier should match the intended network subscription model.
Cisco documents Catalyst 9162 Series access point support for Catalyst 9800 Series Wireless Controllers and Cisco DNA Center. The CW9162I-MR SKU ships for Meraki management, so controller operation depends on the supported management-mode path and licensing requirements. Design teams should confirm firmware release, controller version, and management conversion requirements before staging production APs.
Cisco Meraki documentation lists AIR-AP-BRACKET-2 as bundled with CW9162I-MR. The access point supports desktop, ceiling, and wall mounting, including ceiling tile rail and cable junction box placements. Power accessories such as MA-PWR-30W-XX, MA-INJ-6, AIR-PWRINJ-6, and AIR-PWRINJ-7 are listed separately rather than included with the base unit.
CW9162I-MR differs from CW9164I-MR mainly in radio scale. Cisco ordering guidance lists CW9162I-MR with 2x2+2x2+2x2 MIMO and 2.5G mGig, while CW9164I-MR uses 2x2+4x4+4x4 MIMO with the same 2.5G mGig class. CW9164I-MR is the larger choice when 5 GHz and 6 GHz capacity need more spatial streams.
CW9162I-MR is the smaller internal-antenna Wi-Fi 6E model, while CW9166I-MR is the higher-capacity internal-antenna model. Cisco lists CW9162I-MR with 2x2+2x2+2x2 MIMO and 2.5G mGig, while CW9166I-MR uses 4x4+4x4+4x4 MIMO with an XOR radio and 5G mGig. Dense indoor access cells generally evaluate the CW9166I-MR tier.
CW9162I-MR uses internal omnidirectional antennas for general indoor cells. CW9166D1-MR is a higher-capacity model with integrated directional antennas, 4x4+4x4+4x4 MIMO, an XOR radio, and 5G mGig according to Cisco ordering guidance. The difference matters when the RF design needs directional coverage rather than the CW9162I-MR omnidirectional indoor pattern.
CW9162I-MR is an indoor internal-antenna access point, while CW9163E-MR is an outdoor Wi-Fi 6E access point with N-type antenna connectors. Cisco lists both as 2x2:2 Wi-Fi 6E Meraki models with 2.5G mGig. The environment and antenna design create the main difference between these adjacent Catalyst 9160 options.
CW9162I-MR availability depends on channel stock, condition requirements, and requested quantity at quote time. ORM Systems can source new or refurbished Cisco Meraki access points when supply supports the request. Each quote should identify condition, warranty term, lead time, licensing requirements, and any power accessories needed for the deployment.
CW9162I-MR price depends on condition, quantity, licensing scope, accessory requirements, and current Cisco Meraki hardware availability. ORM Systems provides SKU-specific pricing after checking new and refurbished sourcing options. A complete request should include quantity, destination, preferred condition, warranty expectations, and whether injectors, adapters, or Meraki licenses are required.
Cisco support information lists the Catalyst 9162I product line as Available Order, and the Cisco ordering guide dated July 1, 2026 includes CW9162I-MR in the indoor access point table. Buyers should still verify current channel status at quote time because regional availability, licensing bundles, and supply conditions change over time.
CW9162I-MR lead time varies with requested quantity, condition, destination, and current Cisco Meraki stock. ORM Systems confirms lead time during quotation after checking available new and refurbished channels. Time-sensitive projects should identify the required delivery window, installation schedule, licensing needs, and power accessory requirements so sourcing aligns with the deployment plan.
Yes, ORM Systems can quote bulk CW9162I-MR orders for multi-AP rollouts, branch refreshes, and spare pool builds. Bulk pricing depends on quantity, condition mix, warranty terms, and available inventory. The request should include the bill of materials, preferred delivery phasing, Meraki license requirements, and any injector or adapter quantities.
Warranty options for CW9162I-MR depend on the quoted condition, supplier channel, and commercial package. Cisco documentation states that Catalyst 9162 Series access points include a limited lifetime hardware warranty for eligible original end users. ORM Systems quotes warranty terms for new or refurbished units separately so the buyer can review coverage before purchase approval.
Refurbished CW9162I-MR units should be checked for correct PID, Meraki management state, Ethernet link negotiation, radio operation, power behavior, LED status, and physical condition. A practical wireless refurb test also verifies internal-antenna model identity, resets prior configuration, confirms Dashboard readiness where applicable, and records serial details for asset tracking.
Cisco lists Wi-Fi Alliance certifications for Wi-Fi 6, Wi-Fi 6E, WPA3-R3, WPA3-Suite B, and Enhanced Open Security, plus Bluetooth SIG certification for Bluetooth Low Energy. Compliance references also include RoHS, UL 2043 plenum rating, FCC Part 15B, FCC Part 15C, EN 300 328, EN 301 893, and 802.11a/b/g/n/ac/ax standards.
CW9162I-MR is initially configured by adding the device to Meraki Dashboard, assigning it to the correct network, applying SSIDs and policies, and connecting it to PoE+ or supported DC power. After cloud check-in, the access point receives configuration and firmware updates. Installers should confirm switch port VLANs, DHCP, DNS, firewall reachability, and license assignment.
CW9162I-MR installation needs a suitable indoor mounting location, a 100/1000/2.5G Ethernet switch port, 802.3at or 802.3bt power for full function, Meraki Dashboard access, and the required Meraki license. AIR-AP-BRACKET-2 is bundled, while power injectors, the 12V adapter, and country-specific power cords are separate items when those power methods are used.
CW9162I-MR needs Meraki Dashboard management and an active Meraki access point license for Meraki-mode operation. Firmware is maintained through the cloud after the AP checks in. Cisco also documents IOS XE releases and Catalyst 9800 support for the Catalyst 9162 platform in on-premises management mode, but that path requires compatible management-mode planning.
UK buyers can request CW9162I-MR from ORM Systems for Cisco Meraki wireless projects, replacement APs, and multi-site rollouts. The product request should include quantity, condition preference, required license term, power accessories, destination, and target delivery date. ORM Systems then confirms price, lead time, warranty terms, and available sourcing options.
ORM Systems can support international CW9162I-MR enquiries where export, logistics, and regional compliance requirements allow the transaction. Wireless orders should include destination country because Wi-Fi 6E approvals, operating country settings, power cords, and licensing requirements vary. The quote should confirm shipping terms, lead time, condition, warranty, and required accessories.
United States
