Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
CW9166I-MR
Cisco Meraki CW9166I Cloud-Managed Access Point, Wi-Fi 6E, 4...
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
CW9166I-MR is a Cisco Meraki CW9166I cloud-managed indoor access point for Wi-Fi 6E networks using integrated omnidirectional antennas. The hardware belongs to the Cisco Catalyst 9166 Series and operates as the Meraki persona of the converged 9166I platform, with country behavior controlled through Dashboard rather than a separate country SKU. Its client-serving design combines 2.4 GHz, 5 GHz, and 6 GHz 802.11ax radios with 4x4:4 spatial streams on each band. A dedicated tri-band scanning radio handles Air Marshal WIDS/WIPS, spectrum analysis, and location analytics, while a separate Bluetooth Low Energy radio supports beaconing and scanning. This identity keeps antenna selection tied to the I variant and separates it from directional 9166D1 hardware. The indoor enclosure is built for ceiling, wall, desk, and pole placements and uses Cisco mounting hardware documented for the CW9166I package.
7.78 Gbps of aggregate over-the-air frame rate spans the 6 GHz 4x4:4, 5 GHz 4x4:4, and 2.4 GHz 4x4:4 client radios when the access point runs in tri-band mode. IEEE 802.11ax support includes uplink and downlink OFDMA, uplink and downlink MU-MIMO, 1024-QAM, Target Wake Time, BSS coloring, packet aggregation, and transmit beamforming across the supported channels. The 5Gbps multigigabit RJ-45 uplink carries client traffic to the wired access layer, with a console port available in Cisco DNA management mode. CW9166I-MR also exposes a USB 2.0 host interface with a 4.5W power budget when powered by 802.3bt or DC input. Internal antenna gain is specified as 3 dBi at 2.4 GHz, 5 dBi at 5 GHz, and 4 dBi at 6 GHz. The radio set supports Wi-Fi 6E client steering and 6 GHz operation where regional approval and Dashboard country settings allow it.
Ceiling-grid and wall-mounted deployments place CW9166I-MR near high-density indoor client areas where 6 GHz channels, 5 GHz capacity, and 2.4 GHz compatibility operate under Meraki Dashboard policy. Dashboard management provides cloud configuration, RF optimization, Air Marshal monitoring, traffic shaping, guest access, 802.1Q tagging, IPsec tunneling, and WPA2/WPA3 authentication workflows with 802.1X and Cisco ISE integration. The access point also supports conversion to Cisco Catalyst management with Catalyst 9800 wireless controllers and Catalyst Center for networks that standardize on on-premises control. 802.3bt power enables full radio operation with USB, 802.3at maintains the three 4x4 client radios without USB, and 802.3af is not supported for service. For RF planning, the omnidirectional pattern favors distributed indoor cell layouts with multiple APs coordinated by Dashboard radio profiles. UL 2043 alignment supports ceiling-space installations where local building codes permit. Operating limits are 32 F to 122 F, 10% to 90% noncondensing humidity, and 3,000 m altitude testing.
CW9166I-MR price is is available on request. Get immediate quote.
Request bulk order quote for CW9166I-MR for additional pricing. Browse the full Cisco Catalyst Wifi 6E Access Points series or explore all Cisco products.
CW9166I-MR sits at the indoor access layer where 6 GHz Wi-Fi 6E clients, 5 GHz clients, and 2.4 GHz legacy devices share a coordinated Meraki WLAN. Its three 4x4:4 client radios separate airtime across bands while the 5Gbps uplink returns traffic to the wired access switch. Dashboard RF profiles define channel, power, and SSID policy for each cell. The design gives dense rooms additional spectrum, cleaner band segmentation, predictable client service, and stable roaming behavior under a single cloud-managed access policy.
CW9166I-MR operates as the Meraki-managed AP in remote or distributed indoor sites where local IT staff do not stage every configuration change. Dashboard claims the device, pushes SSIDs and security policy, monitors RF conditions, and applies firmware workflows from the cloud. Air Marshal and spectrum analysis run through the dedicated scanning radio while client traffic remains on the serving radios. The site gains centralized wireless operations, consistent policy enforcement, and measurable RF health without a local wireless controller in each building.
The Catalyst 9166 platform also fits controller-based campus access when the hardware runs in Catalyst management mode with Catalyst 9800 controllers and Catalyst Center. The access point joins the controller plane, serves local client traffic, and aligns RF policy with on-premises WLAN operations. 802.3at service preserves the three 4x4 radios without USB, while 802.3bt adds the USB power budget. This role consolidates Wi-Fi 6E coverage, controller policy, and wired access handoff across managed indoor cells for staff and device traffic.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| CW9166I-MR |  CW9164I-MR |  CW9162I-MR | |
|---|---|---|---|
| Product Type | Wireless Access Point / Indoor Access Point | Wireless Access Point / Indoor Access Point | Wireless Access Point / Indoor Access Point |
| Wireless Type | Access Point | Access Point | Access Point |
| Wi-Fi Standard | Wi-Fi 6E | Wi-Fi 6E | Wi-Fi 6E |
| Frequency Bands | Tri-Band | Tri-Band | Tri-Band |
| Data Rate | 7.78 Gbps aggregate | 7.49 Gbps aggregate PHY | 3.9 Gbps aggregate |
| Connector Type | RJ-45 | RJ-45 | RJ-45 |
| Antenna Type | Internal / Omnidirectional | Internal / Omnidirectional | Internal / Omnidirectional |
| Antenna Gain | 3 dBi 2.4GHz; 5 dBi 5GHz; 4 dBi 6GHz | 3 dBi 2.4 GHz; 5 dBi 5 GHz; 4 dBi 6 GHz | 4 dBi 2.4 GHz; 5 dBi 5/6 GHz |
| MIMO Technology | MU-MIMO | MU-MIMO | MU-MIMO |
| Beamforming | Beamforming Supported | Beamforming Supported | Beamforming Supported |
| Mounting Options | Ceiling Mount / Wall Mount / Pole Mount / Desk Mount | Ceiling Mount / Wall Mount / Desk Mount | Ceiling Mount / Wall Mount / Desk Mount |
| Power Supply | PoE Plus / 802.3bt PoE / DC | PoE Plus / 802.3bt PoE / DC | PoE / PoE Plus / 802.3bt PoE / AC Adapter / DC |
| Ethernet Port | 1 x 100M/1G/2.5G/5G RJ-45 | 1 x 100M/1G/2.5G BASE-T RJ-45 | 1 x 100/1000/2.5G BASE-T RJ-45 |
| Management Features | Cloud Dashboard / Controller-Managed | Cloud Dashboard | Cloud Dashboard / Controller-Managed |
| Security Features | WPA2 / WPA3 / 802.1X / Enhanced Open | WPA2 / WPA3 / 802.1X / Enhanced Open | WPA2 / WPA3 / 802.1X / Enhanced Open |
| Compliance | Safety: UL 2043 / Radio: Wi-Fi 6E; WPA3-R3; BLE | Safety: UL 2043; IEC 62368-1 / EMC: FCC Part 15B / Radio: FCC Part 15C; EN 300 328 | Safety: UL 2043 / EMC: FCC Part 15B / Radio: FCC 15C, EN 300 328 / Wi-Fi: Wi-Fi 6E, WPA3, BLE |
| Memory | 2048 MB DRAM; 1024 MB flash | 2048 MB DRAM; 1024 MB flash | 2048 MB DRAM; 1024 MB flash |
| Product Name | Meraki CW9166I Cloud Managed Omnidirectional 802.11ax Compatible AP | Meraki CW9164I cloud-managed 802.11ax compatible AP | Cisco Catalyst CW9162I Cloud Managed 802.11ax Compatible AP |
| Height | 2.2 in | 2.2 in | 1.7 in |
| Width | 9.5 in | 9.5 in | 7.8 in |
| Depth | 9.5 in | 9.5 in | 7.8 in |
| Weight | 1.60 kg | 1.60 kg (3.54 lb) | 0.93 kg (2.05 lb) |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Stable tri-band performance and Meraki Dashboard management made the indoor rollout straightforward.
The 5GbE uplink and 6 GHz radio helped reduce congestion in dense office areas.
Good AP identity checks and clean hardware for our Meraki refresh project.
The access points adopted into Dashboard quickly and held stable RF profiles.
A strong fit for high-density Wi-Fi 6E rooms with internal antennas.
Power planning needed attention, but 802.3bt operation worked well with USB enabled.
Refurbished units arrived reset, labeled, and ready for Dashboard claiming.
CW9166I-MR is a Cisco Meraki CW9166I cloud-managed indoor wireless access point. It belongs to the Cisco Catalyst 9166 Series and provides Wi-Fi 6E service across 2.4 GHz, 5 GHz, and 6 GHz bands. The SKU uses internal omnidirectional antennas, a 5Gbps multigigabit Ethernet uplink, Meraki Dashboard management, and a dedicated scanning radio for Air Marshal and RF analytics.
CW9166I-MR identifies the Meraki cloud-managed version of the Cisco Catalyst 9166I access point. The I designates the integrated internal antenna model, while MR denotes the Meraki persona rather than a fixed country-specific regulatory SKU. Cisco documentation states that Meraki operation enforces the applicable country behavior through Dashboard after the access point is connected and configured.
CW9166I-MR is an indoor enterprise wireless access point, not a switch, router, controller, or license SKU. It provides client access radios, a wired Ethernet uplink, a USB 2.0 host interface, and separate radios for Bluetooth Low Energy plus RF scanning. The device requires suitable power and Meraki licensing for normal Dashboard-managed operation.
CW9166I-MR sits in the high-performance Wi-Fi 6E tier of the Meraki access point lineup. It is above general-purpose 2x2 models because it provides 4x4:4 client radios on 2.4 GHz, 5 GHz, and 6 GHz, a 7.78Gbps aggregate frame rate, a 5Gbps multigigabit uplink, dedicated RF scanning, BLE support, and USB expansion.
CW9166I-MR supports Wi-Fi 6E through IEEE 802.11ax operation on 2.4 GHz, 5 GHz, and 6 GHz radios. Cisco also documents backward client interoperability with 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac behavior. The 6 GHz band is subject to regional approval and Dashboard country configuration in Meraki mode.
CW9166I-MR uses tri-band client access across 2.4 GHz, 5 GHz, and 6 GHz. It also includes a tri-band Air Marshal WIDS/WIPS, spectrum analysis, and location analytics radio covering those same bands. A separate 2.4 GHz Bluetooth Low Energy radio supports beaconing and BLE scanning, giving the access point five concurrently operating radios.
Cisco lists CW9166I-MR with a 7.78Gbps tri-radio aggregate frame rate. That figure combines the 6 GHz 4x4:4, 5 GHz 4x4:4, and 2.4 GHz 4x4:4 client-serving radios. The value is an over-the-air chipset frame-rate figure, so real client throughput depends on channel width, client capability, RF conditions, and wired uplink design.
CW9166I-MR supports 802.3bt and 802.3at power, with 802.3bt enabling the USB 2.0 interface at a 4.5W budget. Cisco Meraki documentation lists 25W operation on 802.3at without USB and 30.5W operation on 802.3bt with USB. It also states that 802.3af PoE is not supported for service operation.
Cisco does not publish a single recommended client-count limit for CW9166I-MR in the datasheet. Capacity planning should use the 4x4:4 tri-band radio design, channel plan, airtime demand, client mix, SSID count, security policy, and application requirements. High-density designs normally validate AP count and placement through RF planning rather than a fixed device number.
CW9166I-MR is ordered as the Meraki cloud-managed access point and normally operates through Meraki Dashboard. Cisco also documents the Catalyst 9166 Series as a converged platform that supports on-premises management with Catalyst 9800 wireless controllers and Catalyst Center. The selected management mode controls provisioning, monitoring, RF optimization, security policy, and operational workflows.
CW9166I-MR is used for indoor Wi-Fi 6E client access in dense enterprise WLANs. It fits ceiling-grid, wall, desk, or pole-mounted placements where Meraki Dashboard manages SSIDs, security, traffic shaping, RF profiles, guest access, and monitoring. The 5Gbps uplink and tri-band 4x4:4 radio set suit networks with 6 GHz clients and high airtime demand.
CW9166I-MR fits indoor environments with operating limits of 32 F to 122 F, 10% to 90% noncondensing humidity, and altitude testing at 3,000 m. It is designed for distributed indoor wireless cells, not outdoor weather exposure. The internal omnidirectional antennas support standard indoor AP placement across ceiling, wall, desk, and pole mounting options.
CW9166I-MR is suited to high-density Wi-Fi designs when the RF plan, channel widths, client mix, and wired uplink are designed correctly. Its three 4x4:4 client radios, 6 GHz operation, OFDMA, MU-MIMO, BSS coloring, and dedicated scanning radio give engineers more airtime and management data than lower-tier indoor access points.
The 6 GHz radio gives CW9166I-MR access to Wi-Fi 6E spectrum for compatible clients, adding channels beyond traditional 2.4 GHz and 5 GHz operation. That helps designs separate newer client devices from legacy bands when regional rules allow 6 GHz use. Dashboard country settings and local regulatory approval determine available channels and transmit behavior.
Cisco documents CW9166I-MR for Meraki Dashboard operation and also lists Catalyst 9800 Series Wireless Controllers plus Catalyst 9000 switches with Embedded Wireless Controller in SDA mode for Catalyst management. Catalyst Center supports the on-premises management workflow. Compatibility should be checked against the selected management mode, software release, licensing model, and deployment architecture.
Yes, Cisco Meraki documentation states that a Meraki access point license is required. The license enables Dashboard-managed operation, configuration, monitoring, firmware handling, and cloud services. Hardware-only quoting is useful only when the buyer already has the correct license coverage or is sourcing the license separately for the same Dashboard organization.
Catalyst management uses Cisco Catalyst 9800 Series Wireless Controllers, either physical or virtual, and Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode. Catalyst Center provides the associated assurance and automation layer. The exact deployment requires the correct management mode, supported software, and conversion workflow before production operation.
Cisco Meraki installation documentation lists the CW9166I cloud-managed access point package with a Cisco Universal Mount Bracket AIR-AP-BRACKET-2, a T-Rail mount attachment AIR-AP-T-RAIL-R, and five screws for ceiling-grid installation. The datasheet also references AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2 support, while power injectors and DC adapters are separate orderable items.
CW9166I-MR and CW9166D1-MR share the Catalyst 9166 Wi-Fi 6E platform, 4x4:4 tri-band client radios, Meraki management, 5Gbps uplink class, BLE, scanning radio, and similar power behavior. The key difference is antenna pattern: CW9166I-MR uses integrated omnidirectional antennas, while CW9166D1-MR uses integrated directional antennas for high-ceiling or directional coverage designs.
CW9166I-MR is the higher-capacity option compared with CW9164I-MR. Cisco lists CW9166I-MR with 4x4:4 operation on 2.4 GHz, 5 GHz, and 6 GHz plus a 7.78Gbps aggregate frame rate and 5Gbps uplink. CW9164I-MR uses 2x2:2 on 2.4 GHz, 4x4:4 on 5 GHz and 6 GHz, 7.49Gbps aggregate, and a 2.5Gbps uplink.
CW9166I-MR is built for larger and denser indoor cells than CW9162I-MR. Cisco positions CW9162 as a general-purpose Wi-Fi 6E access point with 2x2:2 MU-MIMO on 2.4 GHz, 5 GHz, and 6 GHz, a 3.9Gbps aggregate frame rate, and 2.5Gbps Ethernet. CW9166I-MR provides 4x4:4 tri-band radios, 7.78Gbps aggregate, and 5Gbps Ethernet.
CW9166I-MR and MR57 are both Meraki Wi-Fi 6E indoor access points with 4x4:4 operation across 2.4 GHz, 5 GHz, and 6 GHz. The main difference is wired uplink design: Cisco lists CW9166I-MR with one multigigabit Ethernet port, while MR57 is documented with dual 5Gbps multigigabit Ethernet ports for designs that require dual wired uplinks.
ORM Systems sources CW9166I-MR in new or refurbished condition according to market availability, requested quantity, and project timing. New units support current rollout standards, while refurbished units suit expansion, sparing, and cost-controlled refresh work. Each quote should confirm condition, accessory expectations, licensing needs, warranty terms, and any required delivery date.
CW9166I-MR price depends on condition, quantity, license requirements, sourcing channel, and current Cisco Meraki availability. ORM Systems prepares pricing after checking new and refurbished stock options and any matching license or accessory requirements. Buyers should include target quantity, destination, preferred condition, warranty expectations, and deployment schedule for an accurate quote.
Lead time for CW9166I-MR depends on available new stock, refurbished stock, order size, and destination. ORM Systems confirms realistic fulfillment timing during the quote process rather than assuming immediate availability. Urgent replacement projects should include the required arrival date, quantity, license status, and whether mounting accessories or power injectors are needed.
Yes, ORM Systems supports bulk CW9166I-MR requirements for multi-AP wireless rollouts, refresh projects, and spare pool builds. Volume quoting accounts for matched quantities, condition mix, accessories, license scope, warranty terms, and delivery planning. Project buyers should provide the bill of materials, preferred condition, country, and rollout schedule for cleaner sourcing.
Cisco and Cisco Meraki product documentation continue to list CW9166I-MR as a Meraki CW9166I cloud-managed 802.11ax-compatible access point. Product availability still depends on region, channel inventory, and lifecycle changes after the documentation date. ORM Systems verifies current supply and any substitution questions during quoting before confirming a purchase path.
Warranty terms for CW9166I-MR depend on quoted condition and supply source. Cisco Meraki documentation describes a lifetime hardware warranty with advanced replacement for the indoor access point. ORM Systems quotes warranty coverage for new and refurbished units before order approval, including any extended reseller warranty terms that apply to the selected condition.
Refurbished CW9166I-MR units should be validated for correct PID identity, Meraki persona, physical condition, Ethernet link behavior, radio operation, USB status where applicable, reset state, and accessory presence. ORM Systems confirms testing scope and warranty terms during quoting. This reduces ordering risk for spare pools, staged refreshes, and matched indoor AP deployments.
Cisco documentation lists IEEE 802.11a/b/g/n/ac/ax, IEEE 802.3af/at/bt, Wi-Fi Alliance Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security, and Bluetooth SIG BLE certification for the Catalyst 9166 platform. Safety and radio approvals vary by country, so regional compliance should be verified before deployment in any regulated 6 GHz environment.
CW9166I-MR setup normally starts by claiming the access point in Meraki Dashboard, assigning it to the correct network, connecting Ethernet with supported PoE power, and applying SSID, RF, security, and traffic policies. The unit downloads configuration from Dashboard after connectivity is established. Catalyst-mode deployments follow Cisco controller onboarding and conversion requirements instead.
Meraki Dashboard operation requires an active Meraki access point license assigned to the organization. Catalyst operation requires the correct Cisco wireless controller environment, supported software release, and applicable Cisco licensing for that architecture. License planning should match the intended management mode before hardware is ordered, staged, or converted between modes.
CW9166I-MR planning should include the documented mounting contents, Ethernet cabling, PoE budget, and any optional power hardware. Cisco lists MA-INJ-6, Cisco AIR-PWRINJ-6, Cisco AIR-PWRINJ-7, and MA-PWR-50WAC as separate power options. Power cords for adapters or injectors are separate country-coded SKUs, so they should be specified during quoting.
CW9166I-MR can be bought through ORM Systems for UK business and public-sector wireless projects, subject to stock, condition, license requirements, and quote approval. ORM Systems supports hardware-only requests when licensing is already covered and can also quote related Meraki license, power, and accessory requirements for complete access point deployments.
ORM Systems supports international CW9166I-MR supply where export, import, and wireless regulatory requirements allow the transaction. Buyers should provide destination country, quantity, condition preference, and required delivery date before quotation. Because 6 GHz operation is country-sensitive, deployment teams should verify Meraki Dashboard country settings and local approval before installation.
United States
