Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
N9K-C9808
Cisco N9K-C9808 N9800 8-Slot Modular Chassis Switch
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
N9K-C9808 is an eight-slot modular data center switch chassis for spine and super-spine deployments, rather than a fixed-port access switch. The N9800 architecture uses separately selected line cards for Ethernet connectivity, so the chassis part number does not specify an installed port count or bundled network license. Its 16 RU enclosure accommodates distributed forwarding and configurable hardware redundancy. N9K-C9804 reduces line-card capacity to four slots and occupies 10 RU. Within the Cisco Nexus 9000 family, the Cisco N9808 configuration is a hardware assembly whose connection speeds and port density follow the selected cards, not the chassis label.
N9K-C9808 price is is available on request. Get immediate quote.
Request bulk order quote for N9K-C9808 for additional pricing. Browse the full Cisco Nexus 9800 Switches series or explore all Cisco products.
230400 Gbps maximum switching capacity represents the fully configured chassis ceiling; installed line cards and fabric population determine available bandwidth. Four fan-tray positions accommodate the cooling assembly, while AC, high-voltage AC/DC, and DC power configurations support different facility power arrangements. N9K-C9808 provides two supervisor slots for control-plane redundancy and three power-tray positions for the selected power architecture. Remote administration uses the CLI over SSH, while Telnet requires an optional software package. Serial-console setup establishes the management address before the out-of-band network connection is made.
Order N9K-C9808 in new sealed or certified refurbished condition, and specify the complete required hardware configuration on the PO. Certified refurbished units are inspected and bench-tested for power-on, POST, clean boot, and module bay recognition; managed configurations also have firmware verified and are wiped to factory default. ORM Systems provides new orders with up to a 3-year extended warranty, certified refurbished orders with up to a 1-year warranty, and 30-day returns in either condition; terms apply. For enterprise and volume orders, PO acceptance, Net-30 for government, RMA with advance replacement, and regional stock/RMA coverage across UK, EU, US, and MEA apply.
| Key Specs | Key Spec Values |
|---|---|
Operating System | NX-OS |
Port Configuration | 8 line-card slots; no fixed Ethernet data ports |
Cooling | 4 fan-tray positions |
When expanding a fabric that initially needs 100G connections, N9K-X98900CD-A can operate in 100G-only mode with four fabric modules. Enabling its 400G connections changes the fabric population required for line-rate operation. Specify the intended operating mode and verify the matching fabric quantity before the purchase order.
When standardizing chassis installations across existing racks, N9K-C9800-IN-KIT includes N9K-C9800-AR-KIT with non-adjustable support rails requiring 812.8 mm rail spacing. Rack stabilization and grounding must be addressed before placement. Confirm the rack rail geometry and include the required installation kit on the purchase order.
Fixed ports without additional hardware
N9K-C9808 is a chassis, not a populated fixed-port switch. Ethernet connections require compatible line cards and supporting hardware; the chassis PID alone does not define operational data ports.
Rack allocation below 16 RU
N9K-C9808 occupies 16 RU. N9K-C9804 occupies 10 RU but reduces line-card capacity from eight slots to four, requiring the smaller configuration to satisfy the intended port requirement.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Depth | 857 mm | 838.2 mm | 571 mm | 613.1 mm | 571 mm |
| Form Factor | Chassis | Chassis | Rack-Mount 1U | Rack-Mount 2U | Rack-Mount 2U |
| Height | 711.2 mm | 444.5 mm | 44 mm | 85.9 mm | 89 mm |
| Manufacturer Part Number | N9K-C9808 | N9K-C9804 | N9K-C93108TC-FX-24 | N9K-C93360YC-FX2 | N9K-C9396TX |
| Width | 443.2 mm | 443.2 mm | 439 mm | 442 mm | 445 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
N9K-C9808 identifies the N9800 eight-slot chassis, not an eight-port fixed switch. The eight-slot designation describes line-card capacity rather than installed Ethernet ports. The chassis part number is separate from the supervisor, fabric-module, line-card, power-hardware, and software-license selections that define the complete ordered configuration.
N9K-C9808 is managed through the CLI using a local serial console or remote SSH; Telnet requires installation of an optional package. Initial setup assigns the management IP address before the out-of-band connection is made. Supervisor management interfaces provide the network management path.
Cisco has not announced an end-of-sale date for N9800. N9K-C9808 is the eight-slot chassis in the series, with component choices determining the assembled configuration. Keep the chassis and installed component PIDs separate when planning lifecycle coverage, replacement inventory, and the hardware configuration on a purchase order.
ORM Systems offers N9K-C9808 new sealed with up to a 3-year extended warranty or certified refurbished with up to a 1-year warranty. Both conditions carry 30-day returns; terms apply. These are ORM Systems order warranties, separate from Cisco hardware coverage.
N9K-C9808 supports DCN Essentials, Advantage, and Premier subscriptions with a three-year minimum, plus NX-OS Advantage perpetual licensing through NXOS-AD-DM8. Essentials has no perpetual option. The chassis PID does not select a tier, so the PO must identify the entitlement and any MACsec security license separately.
N9K-C9808 has eight line-card slots in a 16 RU enclosure, whereas N9K-C9804 has four slots in a 10 RU enclosure. Both are modular N9800 chassis. N9K-C9808 accommodates larger line-card configurations; N9K-C9804 suits orders requiring fewer line cards and less rack height.
N9K-C9808 supports the 36-port 800G N9K-X9836E-SP2R-O line card with N9K-C9800-SUP-B and N9K-C9808-FM-B. Seven N9K-C9808-FM-B modules are needed for line-rate operation, while eight provide 7+1 redundancy. First-generation N9K-C9800-SUP-A or N9K-C9808-FM-A hardware cannot support this 800G line card, so these component selections must match.
N9K-C9808 accommodates three power trays, supporting nine AC/HV supplies or twelve DC60 supplies. NXK-HV6.3KW20A-A and NXK-HV6.3KW30A-A are 6300W AC/HV power-supply options, not chassis consumption figures. Size the selected supply population against installed hardware and the required redundancy mode before ordering the complete configuration.
The N9800 eight-slot chassis occupies 16 RU and measures 711.2 mm high, 443.2 mm wide, and 857 mm deep. A fully populated N9K-C9808 can weigh 347 kg. Verify rack capacity, support-rail spacing, grounding, and service access before installation; this chassis requires a complete mounting arrangement.
Ethernet port counts on N9K-C9808 depend on installed line cards, not the chassis PID. N9K-X9836DM-A provides 36 ports at 400G; N9K-X98900CD-A combines 14 ports at 400G with 34 ports at 100G. Select cards and compatible optics for each required link; the chassis has no fixed data ports.