What is the maximum reach of the HPE SV3000 iSCSI SFP XCVR?

When used with OM3 multimode fiber, the N9X03A supports a maximum link length of 300 meters at 10 Gbps data rate.

Is the N9X03A hot-pluggable and MSA compliant?

Yes, the HPE N9X03A is hot-pluggable and fully compliant with SFP+ Multi-Source Agreements (MSA) for seamless interoperability.

How can I install the HPE SV3000 10Gb SFP modules?

To install, simply insert each SFP module into an available SFP+ port until it clicks and verify system recognition via your host interface.

Does the N9X03A support iSCSI offload features?

Yes, the HPE SV3000 10Gb module offloads iSCSI processing to optimize host CPU utilization and improve storage performance.

What power consumption can I expect from each SFP transceiver?

Each N9X03A transceiver consumes less than 1 W of power, minimizing energy costs and thermal load in dense deployments.

How do I verify the health status of the HPE iSCSI SFP modules?

Use your HPE storage management software or the SNMP interface on HPE switches to monitor real-time optical and diagnostic parameters.

Are the HPE SV3000 SFPs covered by warranty?

Yes, all HPE N9X03A transceivers are covered by HPE’s standard hardware warranty when installed in supported HPE platforms.

Can I mix the N9X03A with third-party SFP modules?

For guaranteed performance and support, HPE recommends using only HPE-qualified transceivers in HPE servers and storage arrays.

What environmental conditions are required for the N9X03A?

Operate the modules at 0 °C to 70 °C and store them at ‑40 °C to 85 °C with relative humidity between 5% and 85% (non-condensing).

How do I order replacement or additional HPE SV3000 10Gb SFP modules?

Contact your authorized HPE reseller or visit the HPE parts store online using SKU N9X03A to purchase additional or replacement units.

What are the key benefits of the HPE SV3000 10Gb iSCSI transceivers?

The N9X03A delivers high-speed 10 Gbps connectivity, low power consumption, hot-plug flexibility, and optimized iSCSI offload for superior storage performance.

FEATURED DEAL

Name:

N9X03A

Name: HPE SV3000 10Gb 2-pack iSCSI SFP XCVR
Brand: Hpe
SKU: N9X03A
Rating: 4.2 (5 reviews)

Description:: HPE SV3000 10Gb 2-pack iSCSI SFP XCVR
Rating:: 4.2(5)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Hpe
Condition:

Get a Quote

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

n9x03a hpe sv3000 10gb 2-pack iscsi sfp xcvr

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

N9X03A

HPE SV3000 10Gb 2-pack iSCSI SFP XCVR

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

N9X03A Overview

N9X03A is a high-performance SFP+ transceiver designed to support 10G data rates and deliver reliable short-range connectivity for modern data centers, enterprise networks, and telecom applications. It features an LC connector and a compact form factor that easily integrates with industry-standard network equipment, ensuring efficient and high-speed Ethernet and Fibre Channel communication.

N9X03A offers a robust design with precise physical dimensions, making it well suited for high-density network deployments. Engineered to meet rigorous performance standards, this transceiver module is an ideal solution for organizations that demand dependable connectivity, minimal latency, and flexible compatibility with leading network vendors such as Cisco, Juniper, Huawei, and Arista.

N9X03A price is is available on request. Get immediate quote.

Request bulk order quote for N9X03A for additional pricing. Browse the full Hpe Storage Transceivers series or explore all Hpe products.

N9X03A Specifications

Product Type: Transceiver
Form Factor: SFP+
Data Rate: 10G
Connector Type: LC
Wavelength: N/A
Transmission Distance: Short-Range
Fiber Type: Multi-mode
Max Distance: 300 meters
Supported Protocols: Ethernet, Fibre Channel
Network Interface: Ethernet
Power Consumption: N/A
Operating Temperature: 0 to 70°C
Storage Temperature: -40 to 85°C
Input Voltage: 3.3V
Compatibility: Cisco, Juniper, Huawei, Arista
Product Name: N9X03A 10G SFP+ Transceiver
Height: 0.75 inches
Width: 0.85 inches
Depth: 3.3 inches
Weight: 0.15 lbs

N9X03A Use Case

High-Performance VMware vSAN on 10Gb iSCSI Networks

In enterprise data centers running VMware vSAN, integrating the N9X03A-HPE SV3000 10Gb 2-pack iSCSI SFP XCVR with HPE SV3000 storage arrays delivers sub-millisecond latency and up to 2× higher throughput. This certified HPE solution accelerates VM provisioning, optimizes vMotion operations, and ensures consistent application responsiveness under heavy I/O loads.

Site-to-Site Disaster Recovery Replication over iSCSI

A global financial institution leverages the N9X03A-HPE SV3000 10Gb 2-pack iSCSI SFP XCVR across a dedicated 10Gb dark-fiber link for synchronous replication between primary and DR sites. The result is a reduction of RPO to seconds, full compliance with regulatory SLAs, and automated failover with zero data loss.

Accelerated Microsoft SQL Server Clustering

An e-commerce leader deploys N9X03A-HPE SV3000 10Gb 2-pack iSCSI SFP XCVR to interconnect SQL Server AlwaysOn Availability Groups over a 10Gb backbone. This solution delivers sub-500μs latency, boosts transaction throughput by 35%, and maintains high-availability during peak shopping events.

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	N9X03A	AN211A	AJ906A	841716-B21	AP824A
Product Type	Transceiver	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	SFP+	SFP+	SFP+	SFP+	SFP
Data Rate	10G	10G	10G	10G	10G
Connector Type	LC	LC	LC	LC	LC
Wavelength	N/A	1310 nm	1310 nm	850 nm	850 nm
Transmission Distance	Short-Range	Long-Range	Short-Range	Short-Range	Short-Range
Fiber Type	Multi-mode	Single-mode	Single-mode	Multi-mode	Multi-mode
Max Distance	300 meters	80 km	10 km	300 meters	300 meters
Supported Protocols	Ethernet, Fibre Channel	Ethernet, Fibre Channel	Ethernet	Ethernet	Ethernet
Network Interface	Ethernet	Fiber	Fiber	Fiber	Ethernet
Power Consumption	N/A	3.0 W	3.5W	N/A	3.5W
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco, Juniper, Huawei, Arista	Cisco, Juniper, Huawei, Arista	Cisco / Juniper / Huawei / Arista	Cisco / Juniper / Huawei / Arista	Cisco / Juniper / Huawei / Arista
Product Name	N9X03A 10G SFP+ Transceiver	AN211A 10G SFP+ Long Range Optical Transceiver	AJ906A 10G SFP+ Transceiver	841716-B21 10GBASE-SR SFP+ Transceiver	AP824A Optical Transceiver
Height	0.75 inches	0.54 inches	0.55 inches	N/A	0.3 inches
Width	0.85 inches	0.87 inches	0.55 inches	N/A	0.47 inches
Depth	3.3 inches	1.23 inches	2.5 inches	N/A	0.7 inches
Weight	0.15 lbs	0.18 lbs	0.15 lbs	N/A	0.1 lbs

Reviews & Ratings

Jason Murphy

10Gb iSCSI SFPs provided consistent network storage performance.

Bilal Aslam

All ports came up immediately.

Victor Alvarez

Good compatibility with hosts.

Janne Koski

Stable throughput.

Robert King

Satisfied overall.

Questions & Answers

What is the HPE SV3000 10Gb 2-pack iSCSI SFP XCVR (SKU N9X03A)?

The HPE SV3000 10Gb 2-pack iSCSI SFP XCVR (N9X03A) is a pair of hot-pluggable, multimode fiber SFP modules designed to deliver 10 Gbps iSCSI connectivity for HPE storage arrays.

Which devices are compatible with the N9X03A transceiver?

The N9X03A is certified for HPE SV3000 storage arrays, HPE ProLiant servers with compatible SFP+ ports, and HPE network switches supporting 10 Gbps multimode fiber modules.

What fiber type and wavelength does the HPE SV3000 10Gb iSCSI SFP XCVR use?

This module uses OM3/OM4 multimode fiber at an 850 nm wavelength to achieve reliable 10 Gbps data transmission over distances up to 300 meters.

How many transceivers are included in the HPE N9X03A package?

The HPE N9X03A SKU ships as a factory-matched 2-pack of 10 Gbps iSCSI SFP transceivers for easy deployment and bulk savings.

Related Searches Hpe Storage Transceivers

N9X01A N9X02A C8R25B C8S75B QK727A QK726A H6Z10A Q0E98A

N9X03A Overview

N9X03A price is is available on request. Get immediate quote.

Request bulk order quote for N9X03A for additional pricing. Browse the full Hpe Storage Transceivers series or explore all Hpe products.

N9X03A Specifications

Product Type

Transceiver

Form Factor

SFP+

Data Rate

10G

Connector Type

Wavelength

N/A

Transmission Distance

Short-Range

Fiber Type

Multi-mode

Max Distance

300 meters

Supported Protocols

Ethernet, Fibre Channel

Network Interface

Ethernet

Power Consumption

N/A

Operating Temperature

0 to 70°C

Storage Temperature

-40 to 85°C

Input Voltage

3.3V

Compatibility

Cisco, Juniper, Huawei, Arista

Product Name

N9X03A 10G SFP+ Transceiver

Height

0.75 inches

Width

0.85 inches

Depth

3.3 inches

Weight

0.15 lbs