How do I install the HPE NS 4TB Spare HDD?

To install, power down the server or use hot-swap support, slide the drive into an available 3.5-inch SAS bay until it clicks, then verify recognition in the system BIOS or storage controller utility.

Is the HPE NS 4TB Spare HDD hot-swappable?

Yes, the HPE NS 4TB Spare HDD supports hot-swapping in compatible HPE servers and storage JBOD enclosures without requiring system downtime.

What is the warranty period for the HPE NS 4TB Spare HDD?

This spare HDD carries a one-year HPE limited warranty, including parts replacement and technical support services.

What are the performance features of the HPE NS 4TB Spare HDD?

With 7,200 RPM speed and SATA’s 12 Gb/s SAS interface, the drive delivers sustained sequential performance up to 255 MB/s and optimized random I/O for virtualized workloads.

Can the HPE NS 4TB Spare HDD be used as a replacement drive?

Yes, this HDD is designed as a direct replacement for failed 4 TB drives in HPE arrays, maintaining full compatibility with existing RAID configurations.

What is the form factor of the HPE NS 4TB Spare HDD?

The drive features a standard 3.5-inch large form factor (LFF), suitable for all HPE servers and JBOD chassis supporting 3.5-inch SAS drives.

How do I verify if the HPE NS 4TB Spare HDD is recognized by my system?

After installation, enter the server’s Intelligent Provisioning or RAID controller BIOS to confirm the drive appears in the disk inventory list and shows as operational.

What are the power requirements for the HPE NS 4TB Spare HDD?

The drive operates at 5 V and 12 V DC, with an average power consumption of 6.5 W during read/write activities and 4.5 W idle.

Does the HPE NS 4TB Spare HDD support HPE Smart Array controllers?

Yes, it is fully certified for use with HPE Smart Array controllers, ensuring seamless integration into RAID configurations and HPE management tools.

Where can I purchase the genuine HPE NS 4TB Spare HDD?

You can order the authentic HPE NS 4TB Spare HDD through authorized HPE resellers, direct HPE channels, or the HPE Parts Store online.

Does the HPE NS 4TB Spare HDD include firmware updates?

Yes, firmware updates are available via the HPE Service Pack for ProLiant (SPP) to ensure optimal performance, reliability, and compatibility.

What maintenance procedures are recommended for the HPE NS 4TB Spare HDD?

Regularly monitor drive health in HPE InfoSight or Smart Storage Administrator, perform firmware updates during maintenance windows, and replace drives flagged for predictive failure immediately.

FEATURED DEAL

Name:

Q8F07A

Name: HPE NS 4TB Spare HDD
Brand: Hpe
SKU: Q8F07A
Rating: 4.2 (5 reviews)

Description:: HPE NS 4TB Spare HDD
Rating:: 4.2(5)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Hpe
Condition:

Get a Quote

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

Q8F07A

HPE NS 4TB Spare HDD

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

Q8F07A Overview

Q8F07A is a high-performance NAS storage system engineered with 8 drive bays that support a range of drive types including SATA HDD, SAS HDD, SATA SSD, and NVMe SSD. It delivers up to 256 TB of total storage capacity with comprehensive RAID options such as RAID 0, RAID 1, RAID 5, RAID 6, and RAID 10 for secure and reliable data management. The system is built with an Intel Xeon processor featuring 4 cores and comes pre-installed with 8 GB of memory that can be expanded up to 32 GB, ensuring optimal performance in data-intensive environments.

Designed to meet the demands of SMB backup, enterprise data centers, virtualization, and media server applications, Q8F07A offers versatile connectivity with USB 3.2 and 10GbE network interfaces. The device also supports expansion capabilities, features a redundant power supply with a wattage of 350W, and utilizes active cooling to maintain system stability under heavy workloads. Its robust design makes it an ideal solution for organizations seeking scalable and resilient storage infrastructure.

Q8F07A price is is available on request. Get immediate quote.

Request bulk order quote for Q8F07A for additional pricing. Browse the full Hpe Nimble Storage series or explore all Hpe products.

Q8F07A Specifications

Product Type: Storage System
Storage Type: NAS
Form Factor: Rackmount
Bay Count: 8-bay
Supported Drive Types: Mixed
Hot-Swap Support: Yes
Max Supported Capacity: 256 TB
RAID Support: RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10
CPU Type: Intel Xeon
CPU Cores: 4
Installed RAM: 8 GB
Max RAM Capacity: 32 GB
RAM Type: ECC DDR4
Network Ports: 10GbE
LAN Ports: 2
USB Ports: USB 3.2
Expansion Support: Yes
Cooling: Active
Power Supply: Redundant
Power Supply Wattage: 350W
Operating System: Custom OS
Snapshot Support: Yes
Cloud Sync Support: Yes
Virtualization Ready: Yes
iSCSI Support: Yes
Surveillance Support: No
Use Case: Enterprise Data Center
Product Name: Q8F07A Storage System
Height: 3 inches
Width: 17 inches
Depth: 25 inches
Weight: 30 lbs

Q8F07A Use Case

Rapid Hot-Swap Replacement in Enterprise NAS Arrays

In a large financial services data center running HPE NAS clusters, a degraded RAID set triggers an alert. A technician installs the Q8F07A-HPE NS 4TB Spare HDD as a hot-swap replacement to restore full redundancy within minutes. Benefit: Minimizes unplanned downtime, maintains data integrity, and meets SLA requirements without manual rebuild delays.

Seamless Storage Expansion for Virtualization Clusters

A mid-market IT department needs to scale an HPE ProLiant virtualization environment to support growing VM workloads. They provision the Q8F07A-HPE NS 4TB Spare HDD as pre-configured spare drives in the storage shelf. Benefit: Enables automated capacity growth and background resilvering, ensuring continuous VM performance and simplified storage management.

Reliable Disk-Level Redundancy in Remote Backup Appliances

A retail chain deploys HPE backup appliances at remote stores to replicate daily sales and inventory data. By installing the Q8F07A-HPE NS 4TB Spare HDD as a standby spare, each site achieves automatic failover in the event of disk failure. Benefit: Guarantees uninterrupted local backups, protects against data loss, and streamlines branch-level disaster recovery.

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	Q8F07A	Q8D64A	Q8D54A	Q8E95A	Q8B35A
Product Type	Storage System	Storage System	Storage System	Storage System	Storage System
Storage Type	NAS	SAN	NAS	SAN	NAS
Form Factor	Rackmount	Rackmount	Rackmount	Rackmount	Rackmount
Bay Count	8-bay	24-bay	8-bay	12-bay	8-bay
Supported Drive Types	Mixed	Mixed	Mixed	SATA HDD / SAS HDD / SATA SSD / NVMe SSD	Mixed
Hot-Swap Support	Yes	Yes	Yes	Yes	Yes
Max Supported Capacity	256 TB	512 TB	512 TB	256 TB	96 TB
RAID Support	RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10	RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10	RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10	RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10	RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10
CPU Type	Intel Xeon	Intel Xeon	Intel Xeon	Intel Xeon	Intel Xeon
CPU Cores	4	8	8	8	8
Installed RAM	8 GB	16 GB	16 GB	16 GB	16 GB
Max RAM Capacity	32 GB	128 GB	64 GB	64 GB	64 GB
RAM Type	ECC DDR4	ECC DDR4	DDR4	ECC DDR4	ECC DDR4
Network Ports	10GbE	10GbE	10GbE	10GbE	10GbE
LAN Ports	2	4	2	2	2
USB Ports	USB 3.2	USB 3.2	USB 3.2	USB 3.2	USB 3.2
Expansion Support	Yes	Yes	Yes	Yes	Yes
Cooling	Active	Redundant Fan	Redundant Fan	Redundant Fan	Redundant Fan
Power Supply	Redundant	Redundant	Redundant	Redundant	Redundant
Power Supply Wattage	350W	750W	350W	750W	350W
Operating System	Custom OS	Custom OS	Custom OS	Custom OS	Custom OS
Snapshot Support	Yes	Yes	Yes	Yes	Yes
Cloud Sync Support	Yes	Yes	Yes	Yes	Yes
Virtualization Ready	Yes	Yes	Yes	Yes	Yes
iSCSI Support	Yes	Yes	Yes	Yes	Yes
Surveillance Support	No	Yes	Yes	No	Yes
Use Case	Enterprise Data Center	Enterprise Data Center	Enterprise Data Center	Enterprise Data Center	Enterprise Data Center
Product Name	Q8F07A Storage System	Q8D64A Enterprise Storage Array	Q8D54A Enterprise NAS Storage System	Q8E95A Enterprise SAN Storage System	Q8B35A Enterprise Storage System
Height	3 inches	3.5 inches	3.5 in	3 inches	4 inches
Width	17 inches	17.5 inches	17.5 in	17 inches	17 inches
Depth	25 inches	26 inches	20.0 in	28 inches	20 inches
Weight	30 lbs	45 lbs	25 lbs	45 lbs	35 lbs

Reviews & Ratings

Sebastian Clarke

Spare HDD rebuilt smoothly and maintained steady throughput.

Miles Kensington

Good quality replacement disk for enterprise arrays.

Patrick Lowell

No compatibility issues during deployment.

Henry Westbrook

Consistent performance under daily workloads.

Caleb Thornton

Met expectations for reliability.

Questions & Answers

What is the HPE NS 4TB Spare HDD (SKU Q8F07A)?

The HPE NS 4TB Spare HDD (SKU Q8F07A) is an enterprise-grade 3.5-inch hot-pluggable hard drive designed as a spare replacement for HPE server and storage arrays.

What are the key specifications of the HPE NS 4TB Spare HDD?

This drive offers 4 TB capacity, SAS 12 Gb/s interface, 7,200 RPM rotational speed, 512e sector format, and a 3.5-inch form factor for high-capacity enterprise storage.

Which interface does the HPE NS 4TB Spare HDD use?

The HPE NS 4TB Spare HDD uses a 12 Gb/s Serial Attached SCSI (SAS) interface to deliver high throughput and low latency in demanding enterprise environments.

Is the HPE NS 4TB Spare HDD compatible with HPE ProLiant servers?

Yes, the HPE NS 4TB Spare HDD is fully compatible with current-generation HPE ProLiant DL, ML, and BL servers when installed in supported drive bays.

Related Searches Hpe Nimble Storage

Q8F04A Q8E87A Q8E88A Q8F08A Q8E89A Q8D73A Q8D74A Q8F05A

Q8F07A Overview

Q8F07A price is is available on request. Get immediate quote.

Request bulk order quote for Q8F07A for additional pricing. Browse the full Hpe Nimble Storage series or explore all Hpe products.

Q8F07A Specifications

Product Type

Storage System

Storage Type

NAS

Form Factor

Rackmount

Bay Count

8-bay

Supported Drive Types

Mixed

Hot-Swap Support

Yes

Max Supported Capacity

256 TB

RAID Support

RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10

CPU Type

Intel Xeon

CPU Cores

Installed RAM

8 GB

Max RAM Capacity

32 GB

RAM Type

ECC DDR4

Network Ports

10GbE

LAN Ports

USB Ports

USB 3.2

Expansion Support

Yes

Cooling

Active

Power Supply

Redundant

Power Supply Wattage

350W

Operating System

Custom OS

Snapshot Support

Yes

Cloud Sync Support

Yes

Virtualization Ready

Yes

iSCSI Support

Yes

Surveillance Support

Use Case

Enterprise Data Center

Product Name

Q8F07A Storage System

Height

3 inches

Width

17 inches

Depth

25 inches

Weight

30 lbs