Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$3,212.00
$1,359.7557.7% off
Quantity:
MS410-16-HW
Cisco MS410-16-HW MS410 16-Port Gigabit Fiber Switch, 2x10G...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MS410-16-HW is a cloud-managed Layer 3 fiber aggregation switch with sixteen 1G SFP ports and two fixed 10G SFP+ uplinks. The 1U rack chassis connects access-layer switches in small and medium-sized enterprise networks rather than supplying PoE to copper endpoints. Cisco Meraki MS410 extends cloud management into the aggregation layer, keeping configuration and network visibility within a centrally managed estate. Its fixed uplink arrangement requires no removable network card, while the fiber interface layout makes optic compatibility and link speed central to the hardware decision. The discontinued MS410-32-HW increases Gigabit SFP density to 32 ports for existing installations with more fiber connections to aggregate.
MS410-16-HW price for new stock is $2,068.50, a 35.6% saving from the Cisco list price of $3,212.00. MS410-16-HW refurb price is $1,359.75. MS410-16-HW is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for MS410-16-HW for additional pricing. Browse the full Cisco Meraki MS410 Switches series or explore all Cisco products.
72 Gbps switching capacity supports the installed aggregation interfaces through a nonblocking fabric. OSPFv2 and static routing provide dynamic and fixed route options for an IPv4 network. STP/RSTP and BPDU guard address Layer 2 loop-control requirements, while link aggregation supports multichassis aggregates across physically stacked switches. MS410-16-HW integrates SNMP and SYSLOG monitoring with remote packet capture and searchable event/configuration logs. A 96000-entry MAC table accommodates learned forwarding destinations across aggregated access networks, and DHCP server and relay functions support local or centralized address services. Front-to-back airflow uses two MA-FAN-16K fans; one MA-PWR-250WAC ships installed, with a second MA-PWR-250WAC available for redundancy. 85W maximum power draw informs rack-power planning without adding an endpoint PoE load. The MS410 series also supports scheduled firmware upgrades, allowing administrators to assign maintenance windows rather than treating software updates as an unmanaged background task.
Specify MS410-16-HW in new sealed or certified refurbished condition, and confirm quantities and accessories before issuing the PO. Certified refurbished units are inspected and bench-tested for power-on and POST, rated-speed links on every port, optics bay recognition, clean boot, PSU status, and fan status, with firmware verified and configuration wiped to factory default. ORM Systems provides up to a 3-year extended warranty on new units or up to 1 year on certified refurbished units, plus 30-day returns on every condition, with terms applying; Cisco's separate, nontransferable limited lifetime hardware warranty ends September 28, 2029. Enterprise and volume orders have PO acceptance, Net-30 for government, and RMA with advance replacement, with regional stock/RMA coverage across the UK, EU, US, and MEA.
| Key Specs | Key Spec Values |
|---|---|
Operating System | Meraki |
Port Configuration | 16 x 1G SFP / 2 x 10G SFP+ |
Stacking | 160 Gbps physical stacking / 8 members |
Max Power Draw | 85W |
Cooling | 2 x MA-FAN-16K fans |
Lifecycle Status | End of sale September 28, 2024; support ends September 28, 2029 |
MS410-16-HW sits at the aggregation layer and terminates 1GbE SFP uplinks from access switches, building links, or fiber distribution points. Engineers map VLAN trunks, routed interfaces, ACLs, and OSPF adjacencies in Meraki Dashboard, then forward upstream traffic through the two 10GbE SFP+ uplinks. The 16 SFP port layout keeps fiber handoffs concentrated in one managed switch while preserving dedicated stack ports for expansion. The result is a controlled aggregation point for medium-density fiber networks.
The switch operates as a compact distribution point where routed VLANs, access-layer uplinks, and upstream core paths converge. MS410-16-HW provides 72 Gbps switching capacity, Layer 3 routing, DHCP snooping, Dynamic ARP Inspection, 802.1X support, and Dashboard-based visibility across ports and clients. Network teams place policy boundaries at this layer and reserve the SFP+ interfaces for higher-speed uplinks. The result is centralized routing and fiber concentration without spreading distribution functions across multiple access switches.
Two compatible MS410 switches form a physical aggregation stack through the dedicated hardware stack ports, giving the operations team one coordinated switch block in Meraki Dashboard. MS410-16-HW contributes 16 1GbE SFP aggregation ports per unit while the stack provides up to 160 Gbps stacking bandwidth for inter-switch traffic. Engineers standardize stack cabling, optics, VLAN trunks, routed interfaces, and uplink placement before adding members. The result is expanded fiber density with cleaner administration and predictable aggregation growth.
When a routed aggregation refresh needs OSPF and gateway failover, the mutually exclusive OSPF and warm-spare modes affect the design before hardware quantities are set. Physical stacking provides the alternative gateway-redundancy arrangement. Specify the chosen topology and confirm the required routing behavior before issuing the PO.
When several sites need common port policies, virtual stacking groups configuration work without requiring physical stack connections between locations. Support for 4094 VLANs provides a defined segmentation limit. Establish the port roles, permitted VLAN assignments, and management scope, then confirm the organization-wide configuration plan before ordering.
When a lab must validate an aggregation configuration before a maintenance window, 9578-byte jumbo-frame support gives a specific frame-size limit to test against attached equipment. Stage the intended links and traffic profiles, then record accepted frame sizes and interface assignments before releasing the production PO.
10G access links across every port
MS410-16-HW limits its sixteen SFP aggregation ports to 1G; 10G connections use the two fixed SFP+ uplinks. A removable network module cannot upgrade those access interfaces.
Simultaneous OSPF and warm spare
MS410-16-HW cannot run OSPF and VRRP warm spare concurrently. Physical stacking is the supported gateway-redundancy approach when the network design requires OSPF routing.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MS410-16-HW |  MS250-48FP-HW |  MS425-32-HW |  MS225-48LP-HW |  MS450-12-HW | |
|---|---|---|---|---|---|
| Depth | 482.6 mm | 518.7 mm | 486.9 mm | 340 mm | 478.8 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | 10 Gigabit Ethernet | Gigabit Ethernet | 40 Gigabit Ethernet |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44.2 mm | 43.8 mm | 44.2 mm | 43.8 mm | 43.7 mm |
| Manufacturer Part Number | MS410-16-HW | MS250-48FP-HW | MS425-32-HW | MS225-48LP-HW | MS450-12-HW |
| Power Consumption | 85W | 874W | 136W | 490W | 138W |
| Switching Capacity | 72 Gbps | 176 Gbps | 800 Gbps | 176 Gbps | 1360 Gbps |
| Weight | 5.4 kg | 5.82 kg | 6.35 kg | 4.37 kg | 6.26 kg |
| Width | 440.2 mm | 484.6 mm | 484.4 mm | 484.6 mm | 484.6 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
MS410-16-HW identifies MS410-series hardware with 16 Gigabit SFP ports: MS410 is the series, 16 is the fiber port count, and HW denotes the hardware order. Two 10G SFP+ uplinks are built in, while Enterprise licensing and support are purchased separately from the chassis.
MS410-16-HW is configured through the web-based Meraki Dashboard, with SNMP and SYSLOG integration for external monitoring. Management functions include remote provisioning, scheduled firmware upgrades, packet capture, and searchable event/configuration logs. Specify the destination management organization and required monitoring integrations before assigning the hardware to its deployment.
Yes, MS410-16-HW reached end of sale on September 28, 2024, and its end-of-support date is September 28, 2029. Existing deployments therefore have a defined remaining support horizon. Align replacement stock, license coverage, and the intended service life with that final support date.
MS410-16-HW pairs with Enterprise licensing and support, with a one-year option under LIC-MS410-16-1YR. The hardware PID does not include that software term. Include license coverage as a separate line item for either new or certified refurbished equipment, and match the term to the deployment period.
The MS410 series physically stacks eight switches with 160 Gbps stacking bandwidth. Compatible interconnects are MA-CBL-40G-50CM, MA-CBL-40G-1M, and MA-CBL-40G-3M. Physical stacking joins switches through dedicated stack ports; virtual stacking groups port management and does not create that hardware interconnect or provide its stacking bandwidth.
MS410-16-HW has two built-in 10G SFP+ uplinks and does not require a removable uplink card. Optics are separate accessories, so the purchase order needs transceivers appropriate to the installed fiber. The dedicated hardware stacking connections are not additional Ethernet uplinks for connecting other network equipment.
No, MS410-16-HW cannot operate OSPF and VRRP warm spare concurrently. Physical stacking is the gateway-redundancy approach for an OSPF design. Choose the redundancy arrangement before specifying a multi-switch order, because a warm-spare deployment is not equivalent to an OSPF-enabled physical stack for this requirement.
MS410-16-HW ships with one MA-PWR-250WAC and accepts a second MA-PWR-250WAC for redundancy. The additional MA-PWR-250WAC is sold separately rather than included as standard. Maximum switch consumption is 85W; the 250W rating belongs to MA-PWR-250WAC and does not represent power available to attached endpoints.
MS410-16-HW has 16 Gigabit SFP ports, while MS410-32-HW has 32. Both belong to the discontinued MS410 series. The 16-port model fits an installed aggregation design with fewer fiber connections; the 32-port model suits matching higher-density spare requirements within an existing MS410 deployment.
MS410-16-HW occupies 1U of rack space and includes rack-mount hardware. The chassis weighs 5.4 kg, so rack planning should account for the installed switch and its fiber connections. Front-to-back airflow requires the corresponding ventilation direction; maintain an operating environment between 0°C and 45°C.
ORM Systems offers MS410-16-HW new sealed with up to a 3-year extended warranty, or certified refurbished with up to 1 year; 30-day returns cover every condition, with terms applying. Cisco's nontransferable limited lifetime hardware warranty covers eligible original purchasers only and ends September 28, 2029, separately from ORM coverage.
United States
