SFP-10G-SR
SAVE $1,104.17
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$141.75
Quantity:
N3K-C3048TP-1GE
Cisco N3K-C3048TP-1GE Nexus 3048 48-Port Gigabit Switch, 4x1...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
N3K-C3048TP-1GE connects 48 copper Gigabit Ethernet endpoints through fixed downlinks and provides four built-in 10G SFP+ uplinks. This managed, non-PoE top-of-rack switch runs NX-OS with a default Layer 2 feature set. The Nexus 3048 belongs to the Cisco Nexus 3000 family and uses a 1U chassis with dual-supply redundancy. A dedicated management connection keeps out-of-band administration separate from server-facing traffic, while the uplinks occupy fixed cages rather than a removable network card. The discontinued N3K-C3048-1PS differs by providing a single-supply configuration. For an existing rack replacement, the purchase decision therefore includes the supplied power configuration and installed software entitlements, not just the matching chassis identifier.
N3K-C3048TP-1GE price for new stock is $1,386.00. N3K-C3048TP-1GE refurb price is $141.75. N3K-C3048TP-1GE is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for N3K-C3048TP-1GE for additional pricing. Browse the full Cisco Nexus 3000 Switches series or explore all Cisco products.
176 Gbps switching capacity and 132 Mpps forwarding support line-rate traffic handling across the Ethernet interfaces. 124W maximum power draw provides the electrical sizing figure rather than the rating printed on a compatible power module. A 128000-entry MAC table supports address learning, while the shared 9 MB packet buffer holds queued traffic. N3K-C3048TP-1GE provides 2 GB of boot flash for its operating image. LACP supports link aggregation, and RSTP and MSTP provide loop-control options. vPC supplies Layer 2 multipathing without creating a hardware stack. Keep the switching configuration, management access and licensed routing functions distinct when preparing an existing configuration for a replacement chassis.
N3K-C3048TP-1GE is offered new sealed and certified refurbished; refurbished units are inspected and bench-tested for power-on and POST, rated-speed port links, optics bay recognition, PSU status, fan status and clean boot, with firmware verified and configuration wiped to factory default. Specify the required condition and included hardware on the purchase order before confirming quantities. New hardware carries up to a 3-year extended ORM warranty, certified refurbished hardware carries up to 1 year, and every condition has 30-day returns; terms apply, while Cisco coverage ended August 31, 2025. Enterprise and volume orders accept POs, government purchases can use Net-30, and RMA with advance replacement is available.
| Key Specs | Key Spec Values |
|---|---|
Operating System | NX-OS |
Port Configuration | 48 x 1G RJ-45 / 4 x 10G SFP+ |
Max Power Draw | 124W |
Lifecycle Status | Cisco support ended August 31, 2025 |
Replacement PID | N9K-C92348GC-FX3 / N3K-C3048TP-1GE-RF (Cisco remanufactured; support ended). |
N3K-C3048TP-1GE sits at the top of a rack and terminates 1G copper server, appliance, or management links on 48 fixed 10/100/1000-Mbps RJ-45 ports. Network teams place VLAN trunks, PortChannels, vPC policy, jumbo-frame settings, and security controls at this access layer, then carry northbound traffic over four 1/10-Gbps SFP+ uplinks. Cisco NX-OS keeps operational behavior consistent with upstream Nexus switches. The result is a compact 1RU rack edge that preserves copper server connectivity while presenting controlled 10G uplink handoff per rack.
The switch anchors a rack boundary where 1G server-facing segments need local Layer 2 control and licensed Layer 3 handoff toward aggregation. Engineers configure SVIs, routed ports, PortChannels, static routes, OSPF, EIGRP, or BGP according to the installed N3K-C3048-BAS1K9 or N3K-C3048-LAN1K9 license. N3K-C3048TP-1GE supports 48 copper endpoints, 4 SFP+ uplinks, 32-way ECMP, HSRP, VRRP, and VRF-lite in that routed design. The result is deterministic rack segmentation with upstream path control inside a Nexus operating model for repeated rack builds across sites.
N3K-C3048TP-1GE occupies a monitoring aggregation role when tap or SPAN sources arrive from 1G copper links and analysis tools connect through SFP+ uplinks. Operators use Cisco Nexus Data Broker with NDB-FX-SWT-K9 licensing to filter, replicate, tag, and forward selected traffic from physical ports, PortChannels, or VLAN sources. The 48 RJ-45 ports collect distributed rack feeds, while four 10G uplinks move tool-bound traffic toward packet brokers or analyzers. The result is structured visibility for legacy 1G racks without dedicating production uplink switches to monitoring collection.
When several racks need switches commissioned against a common configuration, Nexus 3048 supports Power On Auto Provisioning for boot-time configuration. Prepare the approved image, configuration files and provisioning dependencies before equipment arrives. Specify the staging requirements and required delivered configuration on the purchase order rather than relying on an existing unit's settings.
When a legacy chassis will receive an image change before installation, N3K-C3048TP-1GE needs a power-sequencer firmware check. Versions earlier than 5.5 are affected by a rare reload-cycle issue. Record the running sequencer version and review the upgrade sequence in staging before specifying the software work required with the order.
When N3K-C3048TP-1GE spares must be allocated across distributed operations, ORM provides regional stock and RMA coverage for the UK, EU, US and MEA. Record the receiving region, required condition and spare quantity for each location. Confirm regional availability and the intended allocation before issuing the purchase order.
25G or 100G uplink connectivity
N3K-C3048TP-1GE uplinks stop at 10G. The current N9K-C92348GC-FX3 retains 48 copper connections and provides four 10/25G ports plus two 40/100G ports.
Current Cisco technical support eligibility
Cisco support for N3K-C3048TP-1GE ended August 31, 2025. N9K-C92348GC-FX3 is the current migration destination; the intermediate N9K-C92348GC-X is also discontinued.
Routing included with the hardware PID
N3K-C3048TP-1GE defaults to Layer 2 operation. Routed unicast and multicast functions require additional licenses; a hardware-only order does not establish those feature entitlements.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Depth | 505 mm | 505 mm | 467 mm | 566 mm | 566 mm |
| Ethernet Technology | Gigabit Ethernet | 40 Gigabit Ethernet | 10 Gigabit Ethernet | 10 Gigabit Ethernet | 40 Gigabit Ethernet |
| Flash Memory | 2 GB | 16 GB | 4 GB | 64 GB | 64 GB |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 2U |
| Height | 44 mm | 44 mm | 43.6 mm | 44 mm | 88.4 mm |
| Manufacturer Part Number | N3K-C3048TP-1GE | N3K-C3132Q-XL | N3K-C3524P-10GX | N3K-C31108PC-V | N3K-C3264Q |
| Power Consumption | 124W | 290W | 193W | 360W | 715W |
| Switching Capacity | 176 Gbps | 2500 Gbps | 480 Gbps | 2160 Gbps | 5120 Gbps |
| Weight | 9.3 kg. | 9.3 kg | 7.9 kg | 9.7 kg | 14.9 kg |
| Width | 439 mm | 439 mm | 439 mm | 439 mm | 442 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 5 December 2022
Reliable access switch with great port density for mixed workloads.
Reviewed on the 12 January 2024
Easy to manage and stable for enterprise networks.
Reviewed on the 21 May 2019
Good balance between 1G access and 10G uplinks.
Reviewed on the 19 October 2023
Consistent performance with no packet loss.
Reviewed on the 20 November 2017
Solid Nexus option for aggregation needs.
N3K-C3048TP-1GE identifies a Nexus 3048 chassis with 48 10/100/1000 Mbps copper ports and four 10G uplinks. N3K associates the chassis with the Nexus 3000 family, C3048TP identifies the model, and 1GE identifies its Gigabit downlink configuration. The hardware PID does not include a routing-license suffix.
Nexus 3048 supports a serial-console CLI, SSHv2 and Telnet, with in-band and out-of-band management access. SNMP v1, v2 and v3, XML NETCONF and Cisco DCNM are also supported. Select the required management path before staging, then prepare the management network, authentication configuration and integration settings for the receiving environment.
N3K-C3048TP-1GE is discontinued: Cisco sales ended August 3, 2020, and support ended August 31, 2025. N3K-C3048TP-1GE-RF denotes Cisco remanufactured hardware, not ORM-certified refurbishment; that support deadline has also passed. The current successor is N9K-C92348GC-FX3, following discontinued N9K-C92348GC-X, whose sales ended September 1, 2025.
ORM offers N3K-C3048TP-1GE new sealed with up to a 3-year extended warranty or certified refurbished with up to a 1-year warranty. Returns are available for 30 days in either condition; terms apply. Cisco hardware warranty coverage and service ended August 31, 2025, so ORM's order warranty applies separately.
N3K-C3048TP-1GE requires no additional license or subscription for its default Layer 2 functions, whether ordered new sealed or ORM certified refurbished. Layer 3 Base uses N3K-C3048-BAS1K9, while LAN Enterprise uses N3K-C3048-LAN1K9 and also requires Base. These legacy feature licenses are no longer sold, so routing entitlements need verification.
N3K-C3048TP-1GE can run OSPFv2 with additional licensing, while BGP requires LAN Enterprise rather than the default Layer 2 software entitlement. N3K-C3048-BAS1K9 enables OSPFv2 limited to 256 routes and EIGRP stub. N3K-C3048-LAN1K9 adds advanced OSPFv2, EIGRP and BGP, and requires the Base license as well.
N3K-C3048TP-1GE with power-sequencer firmware earlier than 5.5 is affected by a rare reload-cycle issue that can leave no console output. The issue is associated with NX-OS releases earlier than 7.0(3)I7(5). Check the sequencer version before an image change and include the required remediation in the staging plan.
N3K-C3048TP-1GE provides dual-supply redundancy, whereas N3K-C3048-1PS is the single-supply configuration. Both are discontinued and Cisco support has ended. The standard chassis matches legacy dual-feed replacement requirements; the single-supply variant identifies an existing single-feed configuration. This comparison concerns matching legacy spares rather than choosing a current Cisco migration product.
N3K-C3048-FA-L3 bundles Base and LAN Enterprise licenses, while N3K-C3048TP-1GE identifies the chassis with default Layer 2 functions. Both models are discontinued. The bundle distinction matters to buyers maintaining existing routed configurations; buyers sourcing the chassis alone must verify the required routing entitlements independently rather than infer them from the hardware PID.
N9K-C92348GC-FX3 provides four 10/25G ports and two 40/100G ports, whereas N3K-C3048TP-1GE provides four 10G uplinks. Both offer 48 copper Gigabit connections. The discontinued Nexus 3048 matches legacy rack-spare requirements; the current FX3 model addresses migration purchases requiring faster aggregation connections rather than another end-of-support chassis.