Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$19,807.68
$12,274.5038% off
Quantity:
C9400-LC-48HX
Cisco C9400-LC-48HX 48-Port 10G RJ-45 UPOE+ Line Card for Ca...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9400-LC-48HX is a Catalyst 9400 line card with the Cisco Catalyst 9400 Series 48-Port UPOE+ 10G multigigabit (RJ-45) product name, 48 copper ports, 100M to 10G speeds and RJ-45 UPOE+ for Catalyst 9400 chassis. 10GBASE-T on all 48 RJ-45 ports is the edge over the 5G C9400-LC-48HN. The Cisco Catalyst 9400 line card fits C9404R, C9407R and C9410R chassis when the chassis uses C9400X-SUP-2 or C9400X-SUP-2XL. It occupies a non-supervisor module slot. Its copper ports connect full-duplex Ethernet and Multigigabit Ethernet endpoints that match 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps or 10 Gbps.
C9400-LC-48HX price for new stock is $14,052.15, a 29.1% saving from the Cisco list price of $19,807.68. C9400-LC-48HX refurb price is $12,274.50. C9400-LC-48HX is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C9400-LC-48HX for additional pricing. Browse the full Cisco C9400-LC Catalyst Line Cards series or explore all Cisco products.
480 Gbps maximum bandwidth applies to the line card; C9400X-SUP-2XL gives 480 Gbps per slot at 1:1 oversubscription, and C9400X-SUP-2 gives 240 Gbps per slot at 2:1 oversubscription. C9400-LC-48HX consumes 270W maximum for facility power and cooling planning. Hot swap is allowed in all Catalyst 9400 line-card slots, and an empty slot takes C9400-S-BLANK. 90W can run simultaneously on 96 ports in C9404R, 226 ports in C9407R or 224 ports in C9410R with maximum power. Cisco IOS XE Cupertino 17.8.1 or later must run before insertion. Hardware provides MACsec-256, PTP readiness, Energy Efficient Ethernet 802.3az, PoE Cable Loss Management and 9216-byte jumbo frames.
C9400-LC-48HX is offered as new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate inspected; seats and locks in a compatible host; recognized by the host; link at every rated speed. Before the PO, confirm the C9404R, C9407R or C9410R chassis, a free non-supervisor slot, the C9400X-SUP-2 or C9400X-SUP-2XL supervisor and the power budget. UK, EU, US and MEA regional stock, PO accepted, Net-30 for government and RMA with advance replacement are available. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 48 x 100M/1G/2.5G/5G/10G RJ-45 |
Capacity | 480 Gbps maximum bandwidth |
Fits | Catalyst 9410R / Catalyst 9407R / Catalyst 9404R |
Module Features | 10GBASE-T UPOE+ / MACsec-256 |
Requires | C9400X-SUP-2 or C9400X-SUP-2XL |
Slot | Non-supervisor line-card slot; hot swap |
C9400-LC-48HX occupies a Catalyst 9400 line-card slot and terminates 48 copper access runs from high-power endpoints. Engineers map 100M, 1G, 2.5G, 5G, and 10G BASE-T ports to endpoint demand, then assign UPOE+, UPOE, PoE+, or PoE power profiles from the chassis power budget. The card keeps RJ-45 access cabling in place while moving selected endpoints beyond gigabit speeds and preserving modular supervisor control. The access closet gains dense multigigabit copper capacity with centralized chassis supervision and planned power allocation across refresh cycles.
The line card sits at the powered access layer for Wi-Fi 6 and Wi-Fi 6E access points that require more than 1G of wired uplink capacity. C9400-LC-48HX presents 48 RJ-45 ports with 2.5G, 5G, and 10G BASE-T options and supplies up to 90W Cisco UPOE+ per port. Engineers place wireless VLANs, QoS markings, authentication policy, and PoE profiles on the Catalyst 9400 platform. The wireless edge receives higher AP uplink bandwidth without optical runs to each endpoint or separate power injectors.
The module operates inside a C9404R, C9407R, or C9410R chassis as a powered endpoint aggregation point for cameras, displays, lighting controllers, and high-bandwidth work areas. Network teams pair C9400-LC-48HX with the selected supervisor and IOS XE release, then validate slot bandwidth, PoE draw, MACsec policy, jumbo frame requirements, and copper cabling quality. The deployment consolidates power and data delivery into the modular switching chassis, reducing separate injector planning and keeping access operations under one management plane during maintenance and growth cycles.
The buyer has a failed 48-port 10G multigigabit UPOE+ copper line card in a Catalyst 9400 chassis. C9400-LC-48HX hot-swaps, but the chassis must run Cisco IOS XE Cupertino 17.8.1 or later. Count one replacement line card and keep C9400-S-BLANK for any empty slot before the PO.
The buyer is adding 48 RJ-45 access ports for endpoints that negotiate 100 Mbps through 10GBASE-T. The chassis needs C9400X-SUP-2 or C9400X-SUP-2XL, a free non-supervisor slot and enough power budget for UPOE+ loads. Count powered ports against 96, 226 or 224 full-90W port limits by chassis.
The buyer is filling a Catalyst 9400 modular chassis with 10G copper UPOE+ capacity. C9404R takes two line-card slots, C9407R takes five and C9410R takes eight. Match each C9400-LC-48HX to a line-card slot, the Supervisor Engine 2 requirement and the running release before the PO.
Supervisor Engine 1 chassis
C9400-LC-48HX requires C9400X-SUP-2 or C9400X-SUP-2XL only; Supervisor Engine 1 builds take C9400-LC-48HN for 5G UPOE+ copper.
Data-only 10G copper ports
C9400-LC-48HX adds UPOE+ on 48 RJ-45 ports; data-only 10G multigigabit copper builds take C9400-LC-48TX in the same chassis.
SFP+ fiber handoff
C9400-LC-48HX uses RJ-45 copper ports; 48-port 1G or 10G fiber handoffs take C9400-LC-48XS with SFP/SFP+ ports.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Line Card | Ethernet | Ethernet | Supervisor/CPU Module | Network Module |
| Data Rate | 10G | 1Gbps | 1Gbps | 40Gbps | 1G |
| Form Factor | Full Slot | Modular | Modular | Modular | Plug-in Module |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
C9400-LC-48HX is the Cisco Catalyst 9400 Series 48-Port UPOE+ 10G multigigabit (RJ-45) line card for Catalyst 9400 chassis. The LC segment marks a line card, 48 marks the port count, H marks UPOE+ copper and X marks 10G multigigabit copper.
C9400-LC-48HX fits Catalyst 9404R, Catalyst 9407R and Catalyst 9410R chassis with C9400X-SUP-2 or C9400X-SUP-2XL. It does not fit Supervisor Engine 1 builds; those builds take other Catalyst 9400 line cards, with C9400-LC-48HN as the 5G UPOE+ copper option.
Catalyst 9400 chassis use C9400-LC-48HX for 48-port 10G UPOE+ copper with Supervisor Engine 2 or 2XL. Other PIDs include C9400-LC-48HN, C9400-LC-48TX, C9400-LC-48H, C9400-LC-48U, C9400-LC-48T, C9400-LC-48UX, C9400-LC-48P, C9400-LC-48XS, C9400-LC-24XS, C9400-LC-24XY, C9400-LC-12QC, C9400-LC-48S and C9400-LC-24S.
C9400-LC-48HX provides 48 RJ-45 ports at 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps or 10GBASE-T. The far end must match full-duplex Ethernet or Multigigabit Ethernet. Half duplex does not fit this line card. Each port carries UPOE+, PoE+ or PoE power.
C9400-LC-48HX fits any non-supervisor module slot in a Catalyst 9400 chassis. C9404R takes two line cards in slots 1 and 4, C9407R takes five in slots 1, 2 and 5 to 7, and C9410R takes eight in slots 1 to 4 and 7 to 10. Empty slots take C9400-S-BLANK.
C9400-LC-48HX adds 10GBASE-T multigigabit UPOE+ copper first, then hardware MACsec-256, PTP readiness, Energy Efficient Ethernet 802.3az, PoE Cable Loss Management, PoE Emergency Shutdown and a passive RFID tag. The chassis must carry C9400X-SUP-2 or C9400X-SUP-2XL for this line card.
C9400-LC-48HX requires Cisco IOS XE Cupertino 17.8.1 or later on Catalyst 9400. A downgrade below Cisco IOS XE Cupertino 17.8.1 requires removing the line card first. C9400X-SUP-2 and C9400X-SUP-2XL start at Cisco IOS XE 17.7.1, so the line-card release is the higher requirement.
C9400-LC-48HX= is the spare form of C9400-LC-48HX. C9400-LC-48HX-RF is the Cisco-remanufactured SKU and is distinct from ORM certified refurbished condition. The base PID is the form to use when the PO asks for new sealed or certified refurbished.
C9400-LC-48HX reaches 10GBASE-T on 48 RJ-45 ports, while C9400-LC-48HN reaches 5G/2.5G multigigabit, 1000M and 100M on 48 RJ-45 ports. Both are UPOE+ line cards. Choose C9400-LC-48HX for 10G copper endpoints and C9400-LC-48HN for 5G copper endpoints.
C9400-LC-48HX adds UPOE+ power on 48 10G multigigabit RJ-45 ports, while C9400-LC-48TX is the 48-port data 10G multigigabit RJ-45 line card. C9400-LC-48HX fits buyers that need powered copper endpoints. C9400-LC-48TX fits data-only 10G copper handoffs.
C9400-LC-48HX uses 48 RJ-45 copper ports with UPOE+ power, while C9400-LC-48XS uses 48 SFP/SFP+ ports as 1G or 10G fiber ports. C9400-LC-48HX fits powered copper endpoints. C9400-LC-48XS fits fiber handoffs that require pluggable optics.
Cisco has not announced an end-of-sale date for C9400-LC-48HX. C9400-LC-48HX serves Catalyst 9404R, Catalyst 9407R and Catalyst 9410R chassis with C9400X-SUP-2 or C9400X-SUP-2XL. The Cisco Refresh PID C9400-LC-48HX-RF exists as a Cisco-remanufactured form.
ORM offers C9400-LC-48HX as new sealed and certified refurbished. New units carry up to 3-year extended warranty; certified refurbished units carry up to 1 year. The Cisco Enhanced Limited Lifetime Hardware Warranty applies to Catalyst 9400 hardware, and 30 days on every condition applies with terms.