Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
MS130-24X-HW
Cisco Meraki MS130 Cloud-Managed Switch, 18x 1G RJ-45, 6x 2....
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MS130-24X-HW is a cloud-managed Layer 2 access switch built for access networks that need multigigabit copper, fixed 10G fiber uplinks, and PoE+ in one rack unit. It provides 18 Gigabit RJ-45 ports for standard wired endpoints, 6 multigigabit RJ-45 ports supporting 100M, 1G, and 2.5G operation, and 4 fixed 10G SFP+ uplinks for upstream connectivity. A shared 370W PoE budget supplies power to compatible phones, cameras, and access points at the access layer. The hardware uses an integrated 1U rack-mount form factor and belongs to the Cisco Meraki MS130 series. The MS130-24P sibling uses 24 Gigabit RJ-45 access ports with 4 1G SFP uplinks, while this model shifts the design to 6 2.5G RJ-45 ports and 4 10G SFP+ uplinks.
146 Gbps switching capacity delivers headroom for mixed 1G access, 2.5G endpoint traffic, and 10G uplink handoff in a compact closet design. 108.6 Mpps forwarding rate, derived from the documented switching capacity, supports line-rate planning where packet forwarding estimates are required for access-layer sizing. 370W PoE budget powers connected devices from the fixed internal power system, with up to 30W available per powered copper port when the shared budget allows it. MS130-24X-HW provides one dedicated management interface for administrative connectivity, separating switch administration from production traffic where the cabling plan uses it. Meraki Dashboard management handles port configuration, VLAN tagging, firmware updates, remote packet capture, SNMP, syslog, DHCP snooping, 802.1X authentication, and IPv4/IPv6 ACL controls from a central cloud console. The switch runs inside a licensed Meraki organization, so hardware planning should align with Enterprise or Advanced MS130 licence terms before rollout. Supported SFP+ accessories include Meraki 10G SR, LR, and ER optics, plus listed twinax cable options for short rack links.
The switch sits at the access tier, connecting workstations, printers, IP phones, cameras, and Wi-Fi access points before handing traffic to distribution or aggregation switches through SFP+ links. This model operates as a non-stacked 1U rack-mount access switch, which suits cabinets where Dashboard-based operations matter more than physical stack membership. MS130-24X-HW is available from ORM Systems in new and certified refurbished condition for refresh projects, replacement orders, and Meraki access expansions. Refurbished units are tested for RJ-45 link operation, 2.5G negotiation, SFP+ recognition, PoE delivery, power stability, and Meraki claim readiness before dispatch. Request current pricing from ORM Systems with the required licence term, regional power cord, optics, and quantity so the order matches the installation plan. Enterprise and volume buyers receive hardware sourcing support across matched switches, compatible transceivers, accessories, licence planning, and multi-site deployment requirements across repeated access-closet rollouts for consistent component planning across every site.
MS130-24X-HW price is $2,178.00. MS130-24X-HW is in stock and available for next-day dispatch. (terms applied)
Request bulk order quote for MS130-24X-HW for additional pricing. Browse the full Meraki MS130 Switches series or explore all Cisco products.
MS130-24X-HW sits in an access closet and terminates copper runs from 1G endpoints, Wi-Fi access points, cameras, phones, and selected 2.5G devices. Network teams place standard clients on the 18 Gigabit RJ-45 ports and reserve the 6 multigigabit RJ-45 ports for higher-throughput endpoints. The 370W PoE budget powers compatible devices from the same switch. The result is a compact access layer that supports mixed endpoint speeds without splitting the closet across separate 1G and mGig switches.
The switch aggregates endpoint traffic at the access layer and forwards northbound traffic through four 10G SFP+ uplinks toward distribution or aggregation switches. Engineers assign trunks, VLANs, spanning tree settings, and uplink monitoring in the Meraki Dashboard, then match Meraki SFP+ optics or twinax cables to the upstream design. MS130-24X-HW keeps 24 copper access ports and high-speed uplinks in one 1U rack unit. The network gains cleaner access-to-distribution bandwidth planning for closets with growing wireless and wired demand.
The switch operates as a Dashboard-managed access node inside a Meraki switching estate. Operations teams claim the hardware into a Dashboard organisation, assign it to the correct network, configure port profiles, VLAN tagging, 802.1X authentication, DHCP snooping, and monitoring policies from the cloud console. The dedicated management interface separates administrative reachability from production switching where the design uses it. The result is centralized access-switch administration with remote troubleshooting, firmware control, and consistent policy handling across MS130 deployments.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MS130-24X-HW |  MS150-24P-4X-HW |  MS130-48X-HW |  MS150-48FP-4X-HW |  MS150-48LP-4X-HW | |
|---|---|---|---|---|---|
| Depth | 254 mm | 250 mm | 340 mm | 340 mm | 340 mm |
| Ethernet Technology | Multi-Gigabit (2.5G) | Gigabit Ethernet | Gigabit Ethernet / Multi-Gigabit (2.5G) | Gigabit Ethernet | Gigabit Ethernet |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | MS130-24X-HW | MS150-24P-4X-HW | MS130-48X-HW | MS150-48FP-4X-HW | MS150-48LP-4X-HW |
| Media Type Supported | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber |
| Power Consumption | 421W | 422.2W | 808W | 891.4W | 460.6W |
| Power Source | AC | AC | AC | AC | AC |
| Product Type | Network Switch | Network Switch | Network Switch | Network Switch | Network Switch |
| Rack Units | 1U | 1U | 1U | 1U | 1U |
| Switching Capacity | 146 Gbps | 128 Gbps | 200 Gbps | 176 Gbps | 176 Gbps |
| Weight | 4.25 kg | 3.6 kg | 5.71 kg | 5.4 kg | 5.4 kg |
| Width | 440 mm | 482 mm | 440 mm | 482 mm | 482 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
The Cisco Meraki MS130-24X-HW is a cloud-managed Layer 2 access switch in the Meraki MS130 family. It provides 18 Gigabit RJ-45 ports, 6 multigigabit 2.5G RJ-45 ports, 4 10G SFP+ uplinks, and a 370W PoE budget. It is designed for branch and campus networks managed through the Meraki Dashboard.
MS130 identifies the Cisco Meraki MS130 switch family, while 24X indicates the 24-port class with multigigabit access ports and 10G SFP+ uplinks. The HW suffix identifies the hardware appliance rather than a licence. MS130-24X-HW is therefore the switch hardware that requires the appropriate Meraki licence for Dashboard operation.
MS130-24X-HW is a cloud-managed Ethernet switch, not a router or firewall. It operates as a Layer 2 access switch for connecting wired endpoints, access points, phones, cameras, and upstream switching infrastructure. Routing, firewall inspection, and WAN security roles normally sit with separate Meraki MX, Catalyst, or other network edge platforms.
MS130-24X-HW sits in the Cisco Meraki MS130 access switching lineup as a 24-port class model with multigigabit access and 10G SFP+ uplinks. It offers more uplink bandwidth and mGig connectivity than basic 1G MS130 models, while remaining below larger 48-port MS130 variants used when higher access density is required.
MS130-24X-HW includes 18 1G RJ-45 access ports, 6 multigigabit RJ-45 ports supporting 100M, 1G, and 2.5G operation, and 4 10G SFP+ uplink ports. It also includes a dedicated management interface. This port mix suits access closets that need standard wired access plus higher-speed links for newer endpoints.
MS130-24X-HW has a listed switching capacity of 146 Gbps. That capacity supports the mix of 18 Gigabit access ports, 6 2.5G multigigabit ports, and 4 10G SFP+ uplinks. Network teams should still size uplinks, VLANs, and traffic patterns according to the wider access and distribution design.
MS130-24X-HW supports 802.3bt PoE with up to 30W per port and a 370W switch PoE budget. This allows the switch to power compatible access points, IP phones, cameras, and other powered devices. Buyers should calculate endpoint demand before ordering, especially where multiple Wi-Fi 6 or high-draw devices share the same access switch.
MS130-24X-HW is positioned as a Layer 2 access switch. It supports access switching functions such as 802.1Q VLAN tagging, DHCP snooping, 802.1X authentication, IPv4 and IPv6 ACL support, SNMP, and syslog integration. Designs that require routed access or advanced Layer 3 services should be checked against the intended Meraki switching architecture.
MS130-24X-HW is managed through the Cisco Meraki Dashboard. The Dashboard provides centralized configuration, monitoring, firmware updates, remote packet capture tools, port settings, VLAN configuration, and troubleshooting visibility. A valid Meraki switch licence is required, so the hardware purchase should be planned together with the correct licence term and organisation model.
MS130-24X-HW is not listed as a dedicated physical stacking switch in the MS130 datasheet. It is deployed as a cloud-managed access switch and administered through the Meraki Dashboard. For environments needing a traditional stacked switching architecture, buyers should compare the requirement with other Meraki or Cisco switch families that explicitly support stacking.
MS130-24X-HW is used for access-layer switching where standard wired devices, multigigabit endpoints, and 10G uplinks meet in one rack-mounted switch. It fits networks that need PoE power, cloud management, and higher-speed access ports for wireless infrastructure or bandwidth-sensitive endpoints without moving to a larger 48-port access switch.
MS130-24X-HW suits small to medium access deployments, branch locations, and campus closets that need 24-port class density. Its 18 1G ports cover standard endpoints, while 6 2.5G ports support higher-bandwidth devices. The 4 10G SFP+ uplinks make it practical for access-to-distribution handoff where uplink headroom is important.
MS130-24X-HW suits wired endpoint access, PoE device aggregation, Wi-Fi access point connectivity, IP telephony, camera networks, and access closets feeding 10G distribution links. Its 370W PoE budget and 2.5G multigigabit ports make it useful where selected endpoints require more than basic Gigabit access performance.
MS130-24X-HW is built for Meraki cloud-managed deployments. It checks into the Meraki Dashboard, receives configuration from the cloud, and supports remote monitoring and troubleshooting. It fits organisations already using Meraki MX security appliances, MR wireless access points, or other MS switches under the same Dashboard-managed operational model.
MS130-24X-HW uses Meraki MS130 licensing. The MS130 licence structure includes Enterprise and Advanced tiers, with term options depending on the licensing model. For subscription licensing, MS130-24, MS130-24P, and MS130-24X align with the MS100 Medium tier. Licence selection should match the existing Meraki organisation and feature requirements.
MS130-24X-HW belongs to the MS130 SFP+ model group. Supported Meraki modules include MA-SFP-1GB-SX, MA-SFP-1GB-LX10, MA-SFP-1GB-TX, MA-SFP-10GB-SR, MA-SFP-10GB-LR, and MA-SFP-10GB-ER. Meraki twinax cables MA-CBL-TA-1M and MA-CBL-TA-3M are also listed for SFP+ model compatibility.
MS130-24X-HW commonly integrates with Meraki MR access points, Meraki MX security appliances, and other Meraki MS switches through the Meraki Dashboard. It also supports standard Ethernet technologies such as RJ-45 copper access, SFP+ fiber uplinks, 802.1Q VLAN tagging, 802.1X authentication, DHCP snooping, SNMP, and syslog.
MS130-24X-HW ships as the MS130 switch hardware, and region-specific power cords are not generally included outside automatic US-order handling. Buyers should order the correct cord such as MA-PWR-CORD-UK, MA-PWR-CORD-EU, or another regional option. Rack mount screws are listed for the MS130-24, 24P, 24X, 48, 48P, and 48X models.
MS130-24X-HW is the stronger choice when multigigabit access and 10G uplinks are required. MS130-24-HW provides 24 1G RJ-45 ports and 4 1G SFP uplinks, without PoE. MS130-24X-HW changes the design to 18 1G ports, 6 2.5G mGig ports, 4 10G SFP+ uplinks, and a 370W PoE budget.
MS130-24X-HW and MS130-24P-HW both provide a 370W PoE switch budget, but their port designs differ. MS130-24P-HW offers 24 1G RJ-45 ports and 4 1G SFP uplinks. MS130-24X-HW adds 6 2.5G mGig RJ-45 ports and 4 10G SFP+ uplinks, making it better for higher-bandwidth access uplinks.
MS130-24X-HW suits 24-port class access closets, while MS130-48X-HW targets higher-density access deployments. MS130-48X-HW provides 40 1G RJ-45 ports, 8 2.5G mGig RJ-45 ports, 4 10G SFP+ uplinks, and a 740W PoE budget. MS130-24X-HW is smaller, lighter, and sized for fewer connected endpoints.
MS130-24X-HW offers higher port density and uplink capacity than MS130-12X-HW. MS130-12X-HW provides 8 1G RJ-45 ports, 4 2.5G mGig RJ-45 ports, 2 10G SFP+ uplinks, and a 240W PoE budget. MS130-24X-HW doubles the access-class footprint with 24 copper ports and 4 10G SFP+ uplinks.
MS130-24X-HW pricing depends on condition, quantity, licence requirements, lead time, and market availability. ORM Systems can quote the switch hardware together with suitable Meraki licensing and accessories where required. Buyers comparing the MS130-24X-HW price should confirm whether the quote includes licence term, power cord, optics, and shipping.
MS130-24X-HW may be sourced as new or refurbished depending on current supply. New units suit standard procurement and vendor-backed refresh projects, while refurbished units can support cost-sensitive expansions or replacement requirements. Availability should be checked at quotation stage because Meraki switch supply and condition options change by channel and region.
MS130-24X-HW belongs to the current Cisco Meraki MS130 family listed in official Meraki documentation. Buyers should still verify production status, regional availability, and licence ordering with ORM Systems before purchase. This is especially important for project rollouts where hardware, licence terms, power cords, and compatible SFP+ modules must arrive together.
MS130-24X-HW lead time depends on stock location, ordered quantity, condition, required licence term, and accessory bundle. Single-unit orders can differ from project quantities that require matched optics or regional power cords. ORM Systems can confirm current lead time during quotation so procurement teams can align deployment dates and installation windows.
Bulk pricing may be available for MS130-24X-HW when buyers order multiple switches, licence terms, optics, power cords, or mixed Meraki hardware together. Volume requests should include target quantity, delivery country, preferred condition, and licence term. This gives ORM Systems enough detail to quote hardware and related components accurately.
ORM Systems warranty coverage for MS130-24X-HW depends on the quoted condition and purchase terms. New and refurbished hardware may carry different coverage periods, so warranty should be confirmed on the quote. Buyers should also separate hardware warranty from Meraki cloud licensing and Cisco support entitlements, because those are distinct procurement items.
Refurbished MS130-24X-HW units should be tested before dispatch to confirm hardware condition, port operation, power behavior, and physical quality. For a Meraki switch, buyers should also confirm device claim status and licensing requirements before deployment. This reduces installation risk when adding the switch to a Dashboard organisation.
MS130-24X-HW supports enterprise switching standards and protocols such as 802.1Q VLAN tagging, 802.1X authentication, DHCP snooping, IPv4 and IPv6 ACLs, SNMP, syslog, SFP+ uplinks, and 802.3bt PoE. Compliance requirements should be checked against the official Cisco Meraki datasheet and regional project requirements before final procurement.
MS130-24X-HW is first claimed into a Meraki Dashboard organisation, added to a Dashboard network, connected to the local network, powered on, and allowed to check in. The switch then receives firmware updates and configuration from Dashboard. Port settings, VLANs, uplinks, and monitoring are completed from the cloud management interface.
MS130-24X-HW requires a valid Meraki switch licence for Dashboard management and operation. The MS130 family supports Enterprise and Advanced licence options, and some organisation models restrict mixing licence tiers. Buyers should select the licence term and tier before deployment so the switch aligns with the existing Meraki licensing model.
MS130-24X-HW orders should include the correct Meraki licence, regional power cord, and any required SFP+ optics or twinax cables. Supported options include Meraki 1G and 10G SFP modules, plus MA-CBL-TA-1M and MA-CBL-TA-3M twinax cables. Rack installation planning should also account for patch leads and upstream switch compatibility.
MS130-24X-HW can be bought in the UK through ORM Systems, subject to current availability, condition, licence requirements, and shipping arrangements. UK buyers should request a quote with the required quantity, licence term, power cord type, and any SFP+ modules. This helps avoid incomplete orders when planning Meraki access switch deployments.
ORM Systems can support international enquiries for MS130-24X-HW depending on destination, stock position, export requirements, and courier availability. International buyers should confirm delivery country, preferred condition, licence term, and accessory requirements at quotation stage. Power cord selection and regional compliance should also be checked before dispatch.
United States
