Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
MS150-48FP-4X-HW
Cisco Meraki MS150 Stackable Cloud-Managed PoE+ Switch, 48x...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MS150-48FP-4X-HW is a Cisco Meraki cloud-managed Layer 2+ access switch built for dense powered edge deployments. The platform provides 48 fixed 1GbE RJ-45 ports for copper endpoint access, four fixed 10GbE SFP+ uplinks for upstream handoff, PoE+ power delivery across the access edge, and an integrated 1U rack-mount chassis within the Cisco Meraki MS150 series. It uses Meraki Dashboard management for provisioning, monitoring, firmware control, and remote troubleshooting rather than a standalone switch workflow. For buyers standardising on Meraki switching, the model keeps access port design simple by pairing all-copper 1G downlinks with fixed high-speed uplinks instead of modular uplink bays. A close sibling, MS150-48LP-4X-HW, keeps the same 48x 1GbE and 4x 10GbE SFP+ port layout but reduces the PoE budget to 370W, while this model provides 740W for higher powered endpoint density.
176 Gbps switching capacity supports aggregated access traffic moving between 48 copper edge ports and the 10GbE uplink set. 130.9 Mpps forwarding rate is derived from the documented switching capacity for line-rate 64-byte packet calculation where a published packet rate is not provided. 740W PoE budget feeds PoE+ endpoints through a shared allocation model, with 30W available per powered port. Static routing gives the platform limited Layer 3 handoff for access segmentation, while 802.1Q VLAN tagging, IPv4/IPv6 ACLs, 802.1X authentication, LACP, STP-family loop protection, DHCP snooping, Dynamic ARP Inspection, SNMP, and Syslog support common campus access controls. MS150-48FP-4X-HW also includes one dedicated management interface, fixed internal power, two dedicated stack ports, and Meraki Dashboard tools such as remote packet capture and automatic firmware updates. 100-240V AC input suits standard rack power feeds, and the documented maximum power load aligns with the 740W PoE budget under full powered use.
MS150-48FP-4X-HW sits in the enterprise access tier, connecting wireless access points, IP phones, cameras, printers, workstations, and other 1GbE devices before handing traffic northbound over 10GbE fiber or DAC uplinks. Physical stacking allows multiple MS150 units to operate as one access block, with dedicated stack ports and 80 Gbps stacking bandwidth, while the 1U chassis keeps each switch aligned with standard rack closet planning. ORM Systems supplies this model in new and certified refurbished condition, and refurbished units are checked for port operation, PoE delivery, uplink recognition, stack-port condition, and Meraki Dashboard claim readiness before dispatch. Request pricing with quantity, condition preference, licence term, optics, power cords, and stacking cables so enterprise and volume buyers receive a complete procurement quote for deployment, spares planning, or multi-site refresh work. Larger rollouts also benefit from matched accessories, consistent warranty terms, single-source supply coordination, and phased delivery planning.
MS150-48FP-4X-HW price is is available on request. Get immediate quote.
Request bulk order quote for MS150-48FP-4X-HW for additional pricing. Browse the full Meraki MS150 Switches series or explore all Cisco products.
MS150-48FP-4X-HW sits in the access layer and terminates copper runs from access points, phones, cameras, printers, and user devices on 48 1G RJ-45 PoE+ ports. Engineers assign VLANs, 802.1X access policies, ACLs, DHCP snooping, and PoE budgets through the Meraki Dashboard, then reserve the four 10G SFP+ ports for upstream links. The 740W PoE budget supports dense powered endpoint planning across a single 1U switch. The network gains a managed 1G powered edge with clear policy control.
The switch occupies the access edge and forwards aggregated endpoint traffic toward distribution through four 10G SFP+ uplinks. Engineers match SFP+ optics or DACs to the upstream switch, configure trunks or routed handoffs, and use static routing where the access design requires local Layer 3 separation. MS150-48FP-4X-HW provides 176 Gbps switching capacity for the 48-port access block. The topology gains higher upstream bandwidth without replacing 1G endpoint cabling or splitting the closet into smaller switches.
Several MS150 switches form a stacked access block when a wiring closet needs more 1G PoE+ ports under one Meraki Dashboard management plane. MS150-48FP-4X-HW contributes 48 powered access ports, a 740W PoE budget, two dedicated stack ports, and 80 Gbps stacking bandwidth per unit. Engineers standardise stack cables, uplink optics, VLAN templates, and firmware policy before adding members. The result is expanded closet capacity with unified switch administration and consistent access-layer configuration across repeated deployments.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MS150-48FP-4X-HW |  MS130-8P-HW |  MS150-48LP-4X-HW |  MS130-24X-HW |  MS130-48X-HW | |
|---|---|---|---|---|---|
| Depth | 340 mm | 150 mm | 340 mm | 254 mm | 340 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Multi-Gigabit (2.5G) | Gigabit Ethernet / Multi-Gigabit (2.5G) |
| Form Factor | Rack-Mount 1U | Desktop | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44 mm | 28 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | MS150-48FP-4X-HW | MS130-8P-HW | MS150-48LP-4X-HW | MS130-24X-HW | MS130-48X-HW |
| Media Type Supported | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber |
| Power Consumption | 891.4W | 128W | 460.6W | 421W | 808W |
| Power Source | AC | DC | AC | AC | AC |
| Product Type | Network Switch | Network Switch | Network Switch | Network Switch | Network Switch |
| Switching Capacity | 176 Gbps | 20 Gbps | 176 Gbps | 146 Gbps | 200 Gbps |
| Weight | 5.4 kg | 0.88 kg | 5.4 kg | 4.25 kg | 5.71 kg |
| Width | 482 mm | 222 mm | 482 mm | 440 mm | 440 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Cisco Meraki MS150-48FP-4X-HW is a stackable cloud-managed PoE+ access switch for branch and campus networks. It provides 48x 1G RJ-45 ports, 4x 10G SFP+ uplinks, a 740W PoE budget, and Meraki Dashboard management. The SKU suits access-layer deployments that need powered endpoints and high-speed uplinks in one 1U switch.
MS150-48FP-4X-HW identifies a Cisco Meraki MS150 hardware switch with 48 fixed 1G copper ports, full PoE power budget, and four 10G SFP+ uplinks. In this family, 48FP distinguishes the 740W PoE model from lower-power 48LP models, while 4X identifies the 10G SFP+ uplink version.
MS150-48FP-4X-HW is an enterprise access switch, not a router, firewall, or wireless access point. It sits at the wired edge of the network and connects devices such as access points, phones, cameras, printers, and workstations. Management runs through the Cisco Meraki Dashboard rather than a traditional standalone switch CLI workflow.
MS150-48FP-4X-HW sits in the Cisco Meraki MS150 stackable access switch family. It is above the 48LP-4X model in PoE budget, below the 48MP-4X model in multigigabit and PoE++ capability, and positioned for dense 1G access deployments that need 10G SFP+ uplinks and 740W PoE capacity.
MS150-48FP-4X-HW has 48x 10/100/1000 Mbps RJ-45 access ports and 4x 10G SFP+ uplink ports. The copper ports serve endpoint access, while the SFP+ ports connect upstream to distribution, core, or aggregation switches. This port mix makes the SKU useful where many 1G powered endpoints share high-speed uplink capacity.
MS150-48FP-4X-HW has a listed switching capacity of 176 Gbps. That capacity aligns with the 48x 1G access ports and 4x 10G SFP+ uplinks in the 48FP-4X model. Buyers should treat this as the switch fabric specification and verify any forwarding-rate requirement against the final Cisco Meraki datasheet during procurement.
MS150-48FP-4X-HW provides PoE+ access switching with a 740W total PoE switch budget and 30W per-port PoE budget. This supports a dense mix of powered endpoints such as Meraki MR access points, VoIP handsets, security cameras, and other standards-based PoE devices, while keeping the access layer managed through the Meraki Dashboard.
MS150-48FP-4X-HW supports static routing as listed for the MS150 family. It is primarily an access-layer switch with Layer 2 switching features, VLAN tagging, ACL support, 802.1X authentication, DHCP snooping, Dynamic ARP Inspection, and Meraki Dashboard policy controls. Designs needing advanced routing should compare higher Meraki switching families before standardising.
MS150-48FP-4X-HW is managed through the Cisco Meraki Dashboard. Network teams use the dashboard for claiming the device, adding it to a network, configuring VLANs and ports, applying firmware updates, viewing network-wide status, running remote packet capture, and monitoring events. SNMP and Syslog integration also support operational visibility in existing toolsets.
MS150-48FP-4X-HW supports physical stacking with two dedicated stack ports and 80 Gbps stacking bandwidth. Cisco Meraki lists MS150 stacking support for up to eight switches in the family. Stacking cables are separate accessories, so buyers should include the correct Meraki stacking cables when ordering multiple switches for one access closet.
MS150-48FP-4X-HW is used for powered access switching in networks that need many 1G endpoint connections and 10G uplinks. It connects access points, phones, cameras, user devices, and printers at the edge, then forwards traffic upstream through SFP+ links. The 740W PoE budget makes it useful where endpoint power density is a planning factor.
MS150-48FP-4X-HW fits medium to large access closets, branch networks, and campus edge deployments that need 48 copper access ports in each switch. The 1U rack form factor, 48x 1G access ports, 4x 10G SFP+ uplinks, and stacking support suit repeatable closet builds where centralised Meraki Dashboard management is already preferred.
MS150-48FP-4X-HW suits wired endpoint access, wireless AP backhaul, VoIP, security camera connectivity, printer networks, and general office access switching. Its 740W PoE budget helps support many powered devices, while 10G SFP+ uplinks move aggregated access traffic upstream. It is not the right choice for multigigabit endpoint ports or PoE++ 60W endpoint loads.
MS150-48FP-4X-HW is suitable for Meraki cloud-managed deployments because configuration, monitoring, firmware updates, and troubleshooting run through the Meraki Dashboard. It fits networks that already use Meraki MR access points, MX security appliances, MV smart cameras, or other Meraki-managed infrastructure and want the wired access layer under the same operating model.
MS150-48FP-4X-HW works well with standards-based 1G Ethernet endpoints and PoE-powered devices, including Meraki MR wireless access points, Meraki MV cameras, IP phones, thin clients, printers, and wired user devices. Its 30W per-port PoE budget suits PoE+ endpoints, while VLANs, 802.1X, ACLs, and DHCP snooping help segment and control access.
MS150-48FP-4X-HW uses 10G SFP+ uplink ports and dedicated stack ports. Relevant accessories include compatible Cisco Meraki SFP+ modules such as MA-SFP-10GB-SR and MA-SFP-10GB-LR for optical uplinks, plus Meraki stacking cables such as MA-CBL-100G-50CM, MA-CBL-100G-1M, or MA-CBL-100G-3M depending on rack layout.
MS150-48FP-4X-HW supports common access switching standards and controls including 802.1Q VLAN tagging, 802.1X authentication, IPv4 and IPv6 ACLs, SNMP, Syslog, DHCP snooping, Dynamic ARP Inspection, broadcast storm control, and static routing. These features help the switch integrate into segmented access networks with monitoring, authentication, and policy enforcement requirements.
MS150-48FP-4X-HW integrates through the Meraki Dashboard alongside Meraki MR wireless access points, MX security appliances, MV smart cameras, and other MS switches. Administrators claim the switch into an organisation, add it to a network, apply configuration profiles, monitor switch events, and use dashboard tools for visibility across wired, wireless, and security infrastructure.
MS150-48FP-4X-HW and MS150-48LP-4X both provide 48x 1G RJ-45 access ports and 4x 10G SFP+ uplinks. The key difference is PoE budget: MS150-48FP-4X-HW provides 740W, while MS150-48LP-4X provides 370W. The 48FP model suits denser PoE+ endpoint loads across the same port count.
MS150-48FP-4X-HW and MS150-48FP-4G both provide 48x 1G RJ-45 PoE+ ports and a 740W PoE switch budget. The difference is uplink speed: MS150-48FP-4X-HW has 4x 10G SFP+ uplinks, while MS150-48FP-4G has 4x 1G SFP uplinks. The 4X model fits higher upstream bandwidth designs.
MS150-48FP-4X-HW provides 48x 1G RJ-45 PoE+ ports, 4x 10G SFP+ uplinks, and 740W PoE. MS150-48MP-4X adds 16x 5G mGig ports and 60W PoE++ support on selected ports, with 32x 1G ports. The 48FP model fits dense 1G PoE+, while 48MP fits multigigabit access.
MS150-48FP-4X-HW doubles the access port count and PoE budget compared with MS150-24P-4X. The 48FP model has 48x 1G RJ-45 ports and 740W PoE, while MS150-24P-4X has 24x 1G RJ-45 ports and 370W PoE. Both use 4x 10G SFP+ uplinks and support MS150 stacking.
MS150-48FP-4X-HW is typically sourced through enterprise hardware channels in new, refurbished, or surplus condition depending on market availability. ORM Systems can quote the requested condition when stock is available. Buyers should specify condition preference, quantity, licence requirements, power cord needs, and any deployment deadline before confirming an order.
MS150-48FP-4X-HW pricing depends on condition, quantity, lead time, licence bundle, warranty preference, and market availability. The most accurate price is produced through a live quote because enterprise switch pricing changes across new and refurbished supply. Buyers comparing quotes should ensure the 740W 4X model is not confused with 370W or 1G-uplink variants.
Cisco Meraki currently presents the MS150 family as an active switch line, so MS150-48FP-4X-HW should be treated as a current Meraki access switch unless Cisco publishes a formal end-of-sale notice. Procurement teams should still verify lifecycle status during quoting when planning long-term standardisation, spares, licence renewals, and multi-site rollout schedules.
Lead time for MS150-48FP-4X-HW depends on requested condition, order quantity, regional stock, accessories, and whether licensing is included. Refurbished units sometimes move faster when tested stock is available, while new units follow distribution availability. Buyers with urgent deployments should confirm the switch, Meraki licence, optics, stacking cables, and power cords together.
Bulk pricing is commonly available for MS150-48FP-4X-HW when buyers order multiple units, standardise several access closets, or combine switches with optics, stacking cables, power cords, and Meraki licences. ORM Systems can price quantity breaks against available stock. Larger orders should include target delivery location, required condition, and acceptable substitutes from the MS150 family.
MS150-48FP-4X-HW purchases from ORM Systems can include warranty coverage depending on condition, sourcing route, and quote terms. Refurbished and new hardware should be reviewed with the offered warranty period before purchase. Buyers should confirm whether coverage includes replacement handling, testing assurance, accessories, and any separate Cisco Meraki licence or support entitlement.
Refurbished MS150-48FP-4X-HW units should be tested for power-on status, port operation, uplink recognition, stack-port condition, PoE output, physical condition, and basic management readiness before dispatch. For Meraki hardware, buyers should also ensure the device is claimable and not tied to another organisation, since Dashboard ownership affects deployment.
MS150-48FP-4X-HW should be assessed against Cisco Meraki regulatory documentation for the target country, rack environment, and power installation. Relevant practical checks include 100-240VAC input support, 0°C to 45°C operating temperature, 5% to 95% humidity range, integrated 1U rack mounting, and use of correct region-specific power cords.
MS150-48FP-4X-HW is first claimed into a Meraki Dashboard organisation, added to the correct Dashboard network, connected to local infrastructure, powered on, and allowed to check in. Administrators then configure switch ports, VLANs, access policies, static routing, stacking, and firmware through the Dashboard. A local status page supports static IP configuration when needed.
MS150-48FP-4X-HW requires Cisco Meraki licensing for Dashboard management and support entitlement. During setup, the switch is claimed into a Meraki organisation and associated with the relevant network and licence. Buyers should align the hardware order with the correct MS150 switch licence term, renewal date, and organisation-level licensing model.
MS150-48FP-4X-HW orders should include the required Meraki licence, region-specific power cord, compatible SFP+ optics or DACs for uplinks, and Meraki stacking cables when stacking is planned. Rack-mount hardware is normally included with the switch, while stacking cables are listed separately. Buyers should match optic type to fiber distance and upstream switch ports.
MS150-48FP-4X-HW can be purchased in the UK through ORM Systems as an enterprise networking SKU for Cisco Meraki access switching projects. Buyers should request a quote with desired condition, quantity, licence term, delivery postcode, and accessory list. Clear requirements help prevent substitutions between 48FP, 48LP, 4X, and 4G MS150 variants.
ORM Systems supports international enquiries for MS150-48FP-4X-HW subject to stock, export checks, courier availability, destination rules, and quote terms. International buyers should provide delivery country, quantity, condition preference, licence needs, and any required commercial paperwork. Power cord compatibility and local Meraki licensing requirements should be confirmed before shipment.
United States
