Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
MS150-48LP-4X-HW
Cisco Meraki MS150 Cloud Managed PoE+ Switch, 48x 1G RJ-45,...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MS150-48LP-4X-HW is a cloud-managed Layer 2+ access switch for buyers who need dense PoE+ copper access with fixed 10G uplinks. It provides 48 1G RJ-45 access ports, four fixed 10G SFP+ uplink ports, a 370W shared PoE budget, and an integrated 1U rack-mount chassis in the Cisco Meraki MS150 series. The fixed uplink design avoids separate network-module selection and gives procurement a hardware SKU that already includes the uplink interface type at purchase. Meraki Dashboard provides centralized configuration, monitoring, firmware management, packet capture, SNMP/Syslog integration, IPv4/IPv6 ACLs, 802.1Q VLAN tagging, 802.1X authentication, DHCP snooping, Dynamic ARP Inspection, Adaptive Policy, and broadcast storm control for access-layer operations. The closest higher-power sibling is MS150-48FP-4X, which keeps the same 48 1G RJ-45 and four 10G SFP+ port layout but raises the PoE budget from 370W to 740W.
176 Gbps switching capacity delivers non-blocking fabric for the fixed access and uplink layout. 130.9 Mpps forwarding rate is derived from the documented switching capacity using the standard 64-byte line-rate calculation because the manufacturer material does not publish a separate packet-forwarding value. 370W shared PoE budget supports mixed powered endpoint loads where the 30W per-port budget is allocated across phones, cameras, access points, and edge devices rather than reserved at full draw on every port. Static routing adds limited routed access behavior without positioning the platform as a full campus distribution router. MS150-48LP-4X-HW uses a dedicated management interface and Meraki cloud check-in workflow, so administrators claim the serial number or order number, add the switch to a Dashboard network, set firmware policy, and apply port configuration remotely. Its 100-240V AC input and fixed internal power supply simplify standard rack power planning. Perpetual PoE and Fast PoE keep power behavior aligned with endpoint recovery requirements during access closet maintenance.
Enterprise access closets use MS150-48LP-4X-HW to connect workstations, phones, cameras, printers, wireless access points, and IoT devices before forwarding traffic toward distribution through fiber or DAC uplinks. Dedicated stack ports provide 80 Gbps stacking bandwidth with MA-CBL-100G-50CM, MA-CBL-100G-1M, or MA-CBL-100G-3M cables, while the 1U chassis preserves rack space across repeated closet builds. ORM Systems supplies this switch new and certified refurbished for refresh projects, break-fix replacement, and multi-site rollouts. Refurbished units are tested for PoE output, RJ-45 link status, SFP+ recognition, Dashboard readiness, and physical condition before dispatch. UK and international shipping options support urgent replacements and planned rollouts. Volume orders are aligned by condition grade, accessory bundle, and delivery window so staged access refreshes receive consistent stock across sites. Request a quote with license term, power cord region, optics, stacking cable requirements, and quantity so enterprise and volume buyers receive hardware aligned to the deployment schedule.
MS150-48LP-4X-HW price is is available on request. Get immediate quote.
Request bulk order quote for MS150-48LP-4X-HW for additional pricing. Browse the full Meraki MS150 Switches series or explore all Cisco products.
MS150-48LP-4X-HW sits in a wiring closet and terminates copper runs from phones, workstations, cameras, printers, and access points on 48 Gigabit RJ45 PoE+ ports. Engineers place VLAN assignments, 802.1X authentication, ACLs, DHCP snooping, and Dynamic ARP Inspection at the access layer, then reserve the 370W PoE budget for endpoints that require switch power. Four 10G SFP+ uplinks carry northbound traffic to distribution. The access closet gains dense powered endpoint handoff with Meraki Dashboard visibility over port state, firmware, and packet capture.
Several MS150 switches form a physical access stack when a closet needs more than 48 powered copper ports under one operational view. MS150-48LP-4X-HW contributes 48 1G PoE+ ports, four 10G SFP+ uplinks, two dedicated stack ports, and 80 Gbps stacking bandwidth to that block. Engineers cable compatible MA-CBL-100G stacking leads, build the stack in Meraki Dashboard, and align VLANs, access policies, and uplink trunks across members. The closet gains higher endpoint density while preserving shared management and predictable uplink design.
The switch anchors a branch access layer and forwards aggregated endpoint traffic toward distribution or WAN edge equipment through four 10G SFP+ uplinks. Engineers connect MA-SFP-10GB-SR, MA-SFP-10GB-LR, or DAC uplink media according to the fiber plant, then configure trunks, static routing, and monitoring in Meraki Dashboard. The 176 Gbps switching capacity supports the 48 copper access ports and uplink group in the same access role. The branch gains centralized operations, faster remote troubleshooting, and a cleaner handoff from powered endpoints to upstream network services.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MS150-48LP-4X-HW |  MS150-48FP-4X-HW |  MS130-8P-HW |  MS150-24P-4X-HW |  MS130-24X-HW | |
|---|---|---|---|---|---|
| Depth | 340 mm | 340 mm | 150 mm | 250 mm | 254 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Multi-Gigabit (2.5G) |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Desktop | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44 mm | 44 mm | 28 mm | 44 mm | 44 mm |
| Manufacturer Part Number | MS150-48LP-4X-HW | MS150-48FP-4X-HW | MS130-8P-HW | MS150-24P-4X-HW | MS130-24X-HW |
| Media Type Supported | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber |
| Power Consumption | 460.6W | 891.4W | 128W | 422.2W | 421W |
| Power Source | AC | AC | DC | AC | AC |
| Product Type | Network Switch | Network Switch | Network Switch | Network Switch | Network Switch |
| Switching Capacity | 176 Gbps | 176 Gbps | 20 Gbps | 128 Gbps | 146 Gbps |
| Weight | 5.4 kg | 5.4 kg | 0.88 kg | 3.6 kg | 4.25 kg |
| Width | 482 mm | 482 mm | 222 mm | 482 mm | 440 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
The Cisco Meraki MS150-48LP-4X-HW is a cloud-managed Layer 2 access switch with 48 1G RJ45 ports, 4 10G SFP+ uplinks, and a 370W PoE budget. It belongs to the Meraki MS150 stackable switch family and is built for dense wired edge deployments that need centralized Dashboard management.
MS150 identifies the Cisco Meraki MS150 switch family, 48 indicates 48 copper access ports, LP identifies the lower 370W PoE budget, 4X identifies four 10G SFP+ uplinks, and HW indicates the hardware appliance. MS150-48LP-4X-HW is therefore the 48-port PoE+ model with 10G uplink capability for access closets.
MS150-48LP-4X-HW is a fixed-configuration Ethernet access switch, not a router, firewall, wireless access point, or transceiver. It provides copper endpoint switching, PoE+ power delivery, SFP+ uplinks, cloud-based configuration, and dedicated physical stacking ports in a 1U rack-mount form factor for wiring closets and equipment rooms.
MS150-48LP-4X-HW sits in the Cisco Meraki MS150 stackable access switch lineup. It is above the non-PoE 48-port variants for powered endpoint deployments, below the higher 740W MS150-48FP-4X PoE budget option, and alongside related 1G SFP and multigigabit models in the same family for cloud-managed access switching.
MS150-48LP-4X-HW provides 48 10/100/1000 Mbps RJ45 access ports and 4 10G SFP+ uplink ports. The copper ports handle endpoint connectivity for devices such as phones, access points, cameras, printers, and workstations, while the SFP+ ports support higher-speed fiber or DAC uplinks toward aggregation or distribution switches.
MS150-48LP-4X-HW has a listed switching capacity of 176 Gbps. That capacity matches the 48 Gigabit access ports and four 10G SFP+ uplinks in the 48LP-4X hardware profile, giving the switch enough fabric capacity for non-blocking access-layer designs using all front-panel ports under normal access traffic patterns.
MS150-48LP-4X-HW supports PoE+ with a 30W per-port budget and a 370W total switch PoE budget. That profile suits mixed powered endpoints where not every port requires maximum power at the same time, such as a combination of phones, cameras, access points, and low-power edge devices.
MS150-48LP-4X-HW is positioned as a Layer 2 access switch and the Cisco Meraki specifications list static routing for the MS150 family. It supports access-layer features such as VLAN tagging, ACLs, 802.1X authentication, DHCP snooping, Dynamic ARP Inspection, and cloud-based policy controls through Meraki Dashboard for routed access designs.
MS150-48LP-4X-HW is managed through Cisco Meraki Dashboard. Network teams claim the device into an organization, add it to a Dashboard network, let it check in over an Internet path, and then manage ports, VLANs, firmware, packet captures, alerts, topology visibility, and switch stacking from the cloud interface.
MS150-48LP-4X-HW supports physical stacking with two dedicated stack ports and 80 Gbps of stacking bandwidth. Cisco Meraki also lists support for stacks of up to eight MS150 switches, with compatible stacking cables such as MA-CBL-100G-50CM, MA-CBL-100G-1M, and MA-CBL-100G-3M ordered separately for stack builds and spare-cable planning.
MS150-48LP-4X-HW is used for high-density access switching where many Gigabit copper endpoints need PoE+ and cloud operations. It fits wiring closets that aggregate user devices and powered edge equipment, then hand traffic to distribution through 10G SFP+ uplinks while retaining Meraki Dashboard visibility and remote troubleshooting.
MS150-48LP-4X-HW fits branch and campus access deployments that need 48 powered Gigabit ports in one rack unit. It is suitable for medium-to-large wiring closets, repeated access blocks, and distributed sites where centralized Meraki management reduces local switch administration across many physical locations and support teams.
MS150-48LP-4X-HW suits endpoint-heavy workloads that need predictable Gigabit access, PoE+ power, VLAN segmentation, and 10G uplink headroom. Common network roles include phone and workstation access, surveillance camera aggregation, wireless access point handoff, printer connectivity, and IoT edge switching under a single Meraki Dashboard policy model.
MS150-48LP-4X-HW works in stacked MS150 access designs using its two dedicated stack ports and 80 Gbps stacking bandwidth. Multiple units contribute 48 PoE+ access ports per switch, while the stack presents consolidated management and uplink planning through Meraki Dashboard for larger closets with repeated endpoint growth.
MS150-48LP-4X-HW uses Cisco Meraki MS150 48-port licensing. The documented license families include LIC-MS150-48-xY Enterprise licenses and LIC-MS150-48A-xY Advanced licenses in 1, 3, 5, 7, and 10 year terms. Meraki organizations must keep MS150 Enterprise and Advanced tiers consistent rather than mixing tiers across the Dashboard organization.
MS150-48LP-4X-HW is an SFP+ MS150 model and supports Meraki 1G and 10G modules listed for SFP+ models. Compatible examples include MA-SFP-1GB-SX, MA-SFP-1GB-LX10, MA-SFP-1GB-TX, MA-SFP-10GB-SR, MA-SFP-10GB-LR, MA-SFP-10GB-ER, and MA-SFP-10GB-ZR for fiber uplink planning and planned on-site spare kits.
MS150-48LP-4X-HW supports Cisco Meraki stacking cables listed for MS150 stack ports. Compatible stacking accessories include MA-CBL-100G-50CM, MA-CBL-100G-1M, and MA-CBL-100G-3M. Stacking cables are not included with the switch, so they should be specified separately when a physical stack is planned before final hardware shipment and site installation.
MS150-48LP-4X-HW integrates with common access-layer standards and controls including 802.1Q VLAN tagging, 802.1X authentication, IPv4 and IPv6 ACLs, SNMP, Syslog, DHCP snooping, Dynamic ARP Inspection, and static routing. It also works inside the Meraki Dashboard ecosystem for monitoring, firmware, packet capture, and configuration workflows for operations teams.
MS150-48LP-4X-HW and MS150-48FP-4X both provide 48 1G RJ45 ports, 4 10G SFP+ uplinks, static routing, and 80 Gbps stacking bandwidth. The key difference is PoE budget: MS150-48LP-4X-HW provides 370W, while MS150-48FP-4X provides 740W for denser powered endpoint loads and higher aggregate PoE draw across access closets.
MS150-48LP-4X-HW and MS150-48LP-4G both provide 48 Gigabit RJ45 ports, PoE+ support, and a 370W switch PoE budget. The difference is uplink speed: MS150-48LP-4X-HW includes 4 10G SFP+ uplinks, while MS150-48LP-4G uses 4 1G SFP uplinks for lower-bandwidth aggregation where 10G uplink headroom is unnecessary for the site.
MS150-48LP-4X-HW and MS150-48T-4X both offer 48 1G RJ45 access ports and 4 10G SFP+ uplinks. MS150-48LP-4X-HW adds PoE+ with a 370W switch power budget, while MS150-48T-4X is the data-only option for endpoints that do not need switch-supplied power inside the access closet design and budget.
MS150-48LP-4X-HW is the better fit for standard 48-port Gigabit PoE+ access where the 370W budget is enough. MS150-48MP-4X adds 16 5G mGig ports, 60W PoE++ support on selected ports, a 740W PoE budget, and 304 Gbps switching capacity for higher-speed powered endpoints and wireless refresh designs.
MS150-48LP-4X-HW is a current Meraki access switch SKU that buyers commonly request in new and refurbished supply channels. ORM Systems can quote suitable condition options based on available stock, project lead time, target budget, and whether the deployment requires factory-sealed hardware or fully tested refurbished units.
MS150-48LP-4X-HW pricing depends on condition, quantity, sourcing route, license term, and required accessories such as stacking cables, power cords, or SFP+ optics. Buyers usually request a live quote because Cisco Meraki hardware and license pricing changes with availability, region, support term, and volume level for each order.
MS150-48LP-4X-HW appears in current Cisco Meraki MS150 documentation as part of the MS150 model family. Buyers should still confirm lifecycle status during procurement, especially for staged rollouts, because end-of-sale and end-of-support notices change over time and can affect standardization plans, spares strategy, and support budgeting.
MS150-48LP-4X-HW lead time depends on live availability, required condition, destination, and whether matching licenses or accessories are included in the order. ORM Systems can source for urgent replacement, planned access refresh, or multi-site rollout requirements, with timing confirmed at quote stage before purchase approval and deployment scheduling.
Bulk pricing is available for MS150-48LP-4X-HW when buyers need multiple switches, repeated access closet builds, or a matched set of hardware, licenses, optics, and stacking cables. Larger quantities help ORM Systems quote against volume sourcing options and align delivery batches with the deployment schedule across sites.
MS150-48LP-4X-HW can be supplied by ORM Systems with warranty coverage appropriate to the quoted condition and sourcing route, including up to a 3-year warranty where available. Buyers should match warranty expectations with new or refurbished condition, required support model, and the Meraki license term used in the organization.
Refurbished MS150-48LP-4X-HW units should be tested before dispatch for power-on behavior, port link status, SFP+ recognition, PoE output, management check-in readiness, physical condition, and accessory completeness. This testing helps confirm that the switch is suitable for access-layer replacement or expansion before it reaches site with fewer surprises.
MS150-48LP-4X-HW matters most against enterprise switching standards and Meraki platform requirements, including 802.1Q VLAN tagging, 802.1X authentication, SNMP, Syslog, IPv4 and IPv6 ACLs, and Dashboard cloud connectivity. Buyers should also specify the correct regional power cord to preserve installation and regulatory fit during site preparation.
MS150-48LP-4X-HW is first claimed into a Cisco Meraki Dashboard organization, added to the correct Dashboard network, connected to upstream infrastructure, powered on, and allowed to check in. After check-in, administrators configure switch ports, VLANs, stacking, static routing, access policies, alerts, and firmware behavior from Dashboard.
MS150-48LP-4X-HW requires a Cisco Meraki MS150 license for Dashboard operation and support. The 48-port license options include Enterprise and Advanced tiers in 1, 3, 5, 7, and 10 year terms, and organizations must keep Enterprise and Advanced licensing tiers consistent across MS150 deployments and renewal planning.
MS150-48LP-4X-HW orders commonly include the correct regional power cord, Meraki MS150 48-port license, SFP+ optics or DAC cables for uplinks, and stacking cables when physical stacking is required. Supported stacking cables include MA-CBL-100G-50CM, MA-CBL-100G-1M, and MA-CBL-100G-3M for planned stack deployments and future expansion planning needs.
Buyers can purchase MS150-48LP-4X-HW in the UK through ORM Systems for Cisco Meraki hardware sourcing, project quotes, and refurbished or new condition options. UK buyers should include license term, accessory requirements, target delivery date, and quantity so the quote matches the access deployment and budget.
ORM Systems ships enterprise hardware such as MS150-48LP-4X-HW internationally, subject to availability, export checks, destination requirements, and courier options. International buyers should specify delivery country, required power cord region, license term, and any optics or stacking accessories needed with the switch order before shipment approval.
United States
