Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
MS130-48X-HW
Cisco Meraki MS130 Cloud-Managed PoE Switch, 40x 1G + 8x 2.5...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MS130-48X-HW is a cloud-managed Layer 2+ access switch for Meraki environments that need dense PoE, multigigabit edge ports, and fixed 10G uplinks in the same rack unit. It provides 40 1G RJ-45 access ports, 8 100M/1G/2.5G mGig RJ-45 ports, 4 fixed 10G SFP+ uplinks, a dedicated management interface, and 802.3bt PoE delivery with up to 30W per powered port. The switch uses a fixed internal power supply, integrated 1U rack mounting, front-panel rack ears, and belongs to the Cisco Meraki MS130 series for branch and campus access designs. The hardware suits closets moving from standard Gigabit access toward higher wireless throughput. MS130-48P differs by using 48 1G RJ-45 ports and 4 1G SFP ports, while this model adds 8 2.5G copper ports and 4 10G SFP+ uplinks for higher access and uplink bandwidth.
200 Gbps switching capacity supports full access-layer aggregation across mixed 1G copper, 2.5G copper, and 10G fiber uplink traffic. 148.8 Mpps derived forwarding rate gives buyers a line-rate planning figure when comparing the switch against other access models in the same Meraki family. 740W PoE budget allocates shared power across up to 48 powered RJ-45 ports for access points, phones, cameras, and other edge devices. Dashboard management provides 802.1Q VLAN tagging, 802.1X authentication, DHCP Snooping, IPv4/6 ACL support, SNMP/Syslog integration, remote packet capture, and automatic firmware upgrades from the Meraki cloud. MS130-48X-HW uses 100-240V AC input and a fixed internal power supply, with operating temperature rated from 0°C to 45°C. Enterprise and Advanced license tiers are available for MS130-48 models, with Advanced adding Adaptive Policy capability where the organization license model supports it. Status LEDs expose cloud connectivity, firmware upgrade state, and port speed behavior during deployment.
MS130-48X-HW operates at the enterprise access tier, connecting wired users, wireless access points, voice endpoints, surveillance devices, printers, and other PoE edge equipment before handing traffic to distribution through 10G SFP+ links. It occupies 1U of rack space and is managed through the Meraki dashboard rather than physical stacking; multi-switch sites remain centrally administered through cloud policy, monitoring, and firmware control. ORM Systems supplies this switch new and certified refurbished, with refurbished units checked for RJ-45 link operation, SFP+ port recognition, PoE output behavior, fan status, power draw, and dashboard readiness. Submit quantity, condition, license term, optic requirements, and delivery location to receive current pricing. Enterprise and volume buyers standardize procurement by pairing the switch with compatible Meraki SFP+ modules, DAC cables, regional power cords, spare rack screws, and the required MS130 license term across repeated access-closet rollouts and staged refresh projects.
MS130-48X-HW price is $7,150.00. MS130-48X-HW is in stock and available for next-day dispatch. (terms applied)
Request bulk order quote for MS130-48X-HW for additional pricing. Browse the full Meraki MS130 Switches series or explore all Cisco products.
MS130-48X-HW sits in an access closet and terminates copper runs from workstations, IP phones, cameras, printers, and wireless access points across 40 Gigabit RJ-45 ports and 8 2.5G RJ-45 ports. Network teams assign VLANs, PoE settings, port schedules, and monitoring policies through the Meraki dashboard. The 740W PoE budget supplies dense powered endpoint groups from the same switch. The deployment gives the access layer higher endpoint density and controlled power delivery under cloud-managed operations.
The switch occupies the edge position for wireless access point handoff where newer APs require more than 1G access speed. Its 8 2.5G RJ-45 ports connect high-throughput access points, while 40 1G ports continue serving standard wired endpoints in the same closet. MS130-48X-HW applies dashboard-managed port configuration, VLAN mapping, and PoE policy across both speed classes. The network gains a mixed-speed access layer that supports wireless upgrades without replacing every copper endpoint port.
The switch aggregates endpoint traffic at the access layer and forwards northbound traffic through 4 10G SFP+ uplinks toward distribution or aggregation switches. Engineers match SFP+ optics or DAC cables to the upstream design, then configure trunks and VLAN transport through the Meraki dashboard. MS130-48X-HW keeps multigigabit endpoint access and 10G uplink handoff in one 48-port platform. The result is cleaner access-to-distribution capacity planning for closets carrying powered devices and higher-bandwidth edge traffic.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MS130-48X-HW |  MS130-8P-HW |  MS150-48FP-4X-HW |  MS150-48LP-4X-HW |  MS130-24X-HW | |
|---|---|---|---|---|---|
| Depth | 340 mm | 150 mm | 340 mm | 340 mm | 254 mm |
| Ethernet Technology | Gigabit Ethernet / Multi-Gigabit (2.5G) | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Multi-Gigabit (2.5G) |
| Form Factor | Rack-Mount 1U | Desktop | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44 mm | 28 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | MS130-48X-HW | MS130-8P-HW | MS150-48FP-4X-HW | MS150-48LP-4X-HW | MS130-24X-HW |
| Media Type Supported | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber |
| Power Consumption | 808W | 128W | 891.4W | 460.6W | 421W |
| Power Source | AC | DC | AC | AC | AC |
| Product Type | Network Switch | Network Switch | Network Switch | Network Switch | Network Switch |
| Switching Capacity | 200 Gbps | 20 Gbps | 176 Gbps | 176 Gbps | 146 Gbps |
| Weight | 5.71 kg | 0.88 kg | 5.4 kg | 5.4 kg | 4.25 kg |
| Width | 440 mm | 222 mm | 482 mm | 482 mm | 440 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Cisco Meraki MS130-48X-HW is a cloud-managed Layer 2 access switch in the Meraki MS130 family. It provides 40 Gigabit RJ-45 access ports, 8 multigigabit 2.5G RJ-45 ports, 4 10G SFP+ uplinks, and a 740W PoE budget for high-density powered edge deployments.
MS130-48X-HW identifies a Meraki MS130 series hardware switch with 48 copper access ports and the higher-spec X configuration. The X model adds multigigabit RJ-45 ports and 10G SFP+ uplinks compared with standard 48-port MS130 variants, making it suitable for access closets that need faster endpoint and uplink capacity.
MS130-48X-HW is a cloud-managed network switch, not a router or wireless access point. It is designed for Layer 2 access switching, endpoint connectivity, PoE delivery, VLAN segmentation, and uplink handoff to distribution or core switches through its 10G SFP+ uplink interfaces.
MS130-48X-HW sits in the Cisco Meraki MS130 access switching lineup. It is positioned above lower-density MS130 models because it combines 48 access ports, multigigabit 2.5G copper ports, 10G SFP+ uplinks, and a 740W PoE budget for larger branch and campus access deployments.
Cisco Meraki MS130-48X-HW has 40 1G RJ-45 copper ports, 8 2.5G multigigabit RJ-45 copper ports, and 4 10G SFP+ uplink ports. This layout supports a mix of standard endpoints, higher-bandwidth wireless access points, and fiber or DAC uplinks to upstream switching infrastructure.
MS130-48X-HW is commonly listed with 200 Gbps switching capacity. That capacity aligns with its 40 Gigabit ports, 8 2.5G multigigabit ports, and 4 10G SFP+ uplinks. Buyers should confirm final performance figures against Cisco Meraki documentation for the exact regional part and software release.
MS130-48X-HW supports PoE with a 740W total power budget. This makes it suitable for powering connected devices such as wireless access points, IP phones, security cameras, and other PoE endpoints from the access layer while keeping switching and power delivery managed through the Meraki cloud dashboard.
Cisco MS130-48X-HW is positioned as a Layer 2 access switch in the Meraki MS130 family. It is built for VLAN-based access switching, endpoint aggregation, PoE delivery, and uplink handoff rather than full distribution-layer routing. Routing-heavy designs should compare it with higher Meraki switching families.
MS130-48X-HW is managed through the Cisco Meraki cloud dashboard. Network teams use the dashboard to configure ports, VLANs, PoE settings, switch monitoring, firmware, alerts, and client visibility. A valid Meraki license is required for activation and ongoing cloud management of the switch.
MS130-48X-HW is best treated as a cloud-managed access switch rather than a physical stacking switch. Meraki dashboard management supports centralized administration across multiple switches, but buyers needing dedicated physical stack links should review stack-capable Meraki families and Cisco’s current stacking compatibility guidance before ordering.
MS130-48X-HW is used for high-density access switching where copper endpoints, powered devices, multigigabit access ports, and 10G uplinks are needed in one managed platform. Typical roles include access closet refreshes, Wi-Fi 6 or Wi-Fi 6E access point handoff, endpoint aggregation, and branch switching.
Cisco MS130-48X-HW fits medium to large access environments that require 48 copper access ports and a strong PoE budget. Its 8 2.5G ports support higher-bandwidth devices, while 4 10G SFP+ uplinks give enough uplink headroom for access-to-distribution traffic in growing networks.
MS130-48X-HW suits access workloads involving powered endpoints, dense user access, wireless access point connectivity, IP voice, surveillance devices, and multigigabit edge traffic. The 740W PoE budget and 2.5G copper ports make it especially useful where newer access points or high-bandwidth edge devices exceed standard 1G needs.
MS130-48X-HW is designed for Meraki cloud deployments and is operated through the Meraki dashboard. It fits networks already using Meraki MR access points, MX security appliances, Systems Manager, and other dashboard-managed infrastructure, giving administrators consistent monitoring, configuration, and alerting across the access layer.
MS130-48X-HW integrates naturally with Meraki MR wireless access points, Meraki MX security appliances, and other Meraki MS switches through the Meraki dashboard. It also connects to standard Ethernet endpoints using IEEE Ethernet and PoE standards, with uplinks through compatible 10G SFP+ optics or DAC cables.
MS130-48X-HW uses 10G SFP+ uplink ports, so compatible Meraki or Cisco-supported SFP+ transceivers and DAC cables should be selected according to the fiber type, reach, and upstream switch interface. Buyers should match the optic to 10G SFP+ requirements and verify Cisco Meraki compatibility before deployment.
MS130-48X-HW is a strong fit for Wi-Fi 6 and Wi-Fi 6E access point connectivity because it includes 8 2.5G multigigabit RJ-45 ports and a 740W PoE budget. Those ports help avoid limiting higher-throughput access points to standard Gigabit access links.
MS130-48X-HW is relevant to Ethernet access switching, multigigabit copper connectivity, SFP+ uplinks, VLAN-based Layer 2 switching, and PoE-powered endpoint deployments. Its copper ports support standard RJ-45 Ethernet cabling, while the uplink ports use 10G SFP+ modules or DACs matched to the upstream design.
MS130-48X-HW is the higher-bandwidth choice compared with MS130-48-HW. The X model adds 8 2.5G multigigabit RJ-45 ports and 4 10G SFP+ uplinks, while standard MS130-48 variants focus on 1G access switching. MS130-48X-HW is better where newer access points or uplink headroom matter.
MS130-48X-HW is better suited when multigigabit access and 10G uplinks are required. MS130-48P-HW fits 48-port PoE access deployments centered on 1G endpoints, while MS130-48X-HW adds 8 2.5G ports for faster devices and keeps a high 740W PoE budget for powered access environments.
MS130-48X-HW provides higher access density than MS130-24X-HW. The 48X model gives 40 1G ports plus 8 2.5G ports, while MS130-24X-HW is better for smaller closets needing fewer access ports. Both are useful when multigigabit copper and 10G SFP+ uplinks are required.
MS130-48X-HW is a practical refresh option for networks evaluating older Meraki MS125-48 access switches. It brings the newer MS130 family, multigigabit access options, and cloud-managed Layer 2 switching. Final replacement suitability depends on required PoE budget, uplink type, licensing, and any physical stacking expectations.
Cisco Meraki MS130-48X-HW pricing depends on condition, quantity, license term, sourcing route, and current availability. Buyers comparing MS130-48X-HW price should account for the hardware cost and the required Meraki license. ORM Systems provides quotations for new and refurbished units based on live procurement conditions.
MS130-48X-HW may be available as new, refurbished, or excess-stock hardware depending on current channel supply. Refurbished units are useful for budget-controlled projects, spares, and phased Meraki access refreshes. Buyers should confirm condition, warranty term, accessories, and license requirements before placing an order.
Cisco Meraki MS130-48X-HW belongs to the current MS130 access switch family, but production and regional availability should always be confirmed at quote stage. Cisco Meraki product lifecycle status, lead times, and licensing availability affect procurement planning, especially for multi-site rollouts or standardized refresh projects.
MS130-48X-HW lead time depends on stock position, requested condition, order quantity, license selection, and destination. Single-unit orders may move faster when hardware is available, while larger rollouts require allocation checks. ORM Systems can quote lead times after confirming the required quantity and delivery location.
Bulk pricing may be available for MS130-48X-HW when buyers need multiple switches for access closet refreshes, branch rollouts, or spare stock. Quantity, condition, license term, and delivery schedule all affect the final quotation. Larger orders should include required accessories and optics for accurate pricing.
MS130-48X-HW units from ORM Systems may be supplied with warranty options depending on condition, source, and availability. New and refurbished hardware should be quoted with the applicable warranty term clearly stated. Buyers should review warranty coverage, replacement terms, and support route before confirming procurement.
Refurbished MS130-48X-HW switches should be tested for power-on operation, port availability, uplink recognition, PoE output behavior, physical condition, and basic management readiness before dispatch. Buyers should confirm that testing covers copper ports, SFP+ uplinks, fans, power supply status, and serial-number checks.
MS130-48X-HW follows Cisco Meraki hardware compliance requirements for enterprise network switches. Relevant certifications vary by region and should be checked against Cisco Meraki documentation or product labeling. Buyers with regulated deployment requirements should confirm safety, EMC, environmental, and country-specific compliance before purchase.
MS130-48X-HW is first claimed into a Meraki dashboard organization, assigned to a network, licensed, connected to uplink and power, and configured through cloud management. Administrators then define VLANs, port profiles, PoE behavior, trunk settings, firmware policy, alerts, and monitoring visibility.
MS130-48X-HW requires a Meraki license for activation, cloud management, firmware updates, dashboard monitoring, and support entitlement. Hardware-only pricing should not be treated as the full deployment cost. Buyers should select the correct MS130 license term for the intended ownership and support period.
MS130-48X-HW deployments may require rack-mount hardware, power cable, compatible 10G SFP+ optics or DAC cables, RJ-45 patch leads, upstream switch ports, and a Meraki license. The exact accessory list depends on whether uplinks use fiber, copper DAC, or existing structured cabling.
Cisco Meraki MS130-48X-HW can be purchased in the UK through ORM Systems for B2B hardware procurement. Buyers can request pricing for new or refurbished units, confirm Meraki license requirements, compare availability, and source related items such as SFP+ optics, DAC cables, and compatible access switches.
ORM Systems can support international enquiries for MS130-48X-HW depending on destination, stock source, export requirements, and carrier availability. International buyers should confirm lead time, shipping cost, warranty handling, licensing region, and customs documentation before ordering Cisco Meraki hardware for cross-border deployment.
United States
