Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,212.00
Quantity:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
MS130-8P-HW
Cisco Meraki MS130 Cloud-Managed PoE+ Switch, 8x Gigabit RJ-...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MS130-8P-HW is a compact cloud-managed Layer 2 PoE+ access switch with 8 fixed 1GbE RJ-45 ports, 2 fixed 1GbE SFP uplinks, and a shared 120W PoE budget for powered endpoints. It uses the Cisco Meraki Dashboard for port configuration, monitoring, firmware handling, and remote troubleshooting, placing it in the Cisco Meraki MS130 series for branch and low-density campus access roles. The desktop and integrated wall-mount design fits counters, small closets, and distributed edge locations where a full rack-width switch is unnecessary, while fanless operation supports placement near users in quiet rooms. Its fixed uplinks suit fibre or copper transceiver handoff without an empty modular bay or separate uplink card. MS130-8-HW is the closest non-PoE sibling, with the same 8x 1GbE RJ-45 and 2x 1GbE SFP port layout but no PoE switch budget.
20 Gbps switching capacity supports line-rate forwarding across the fixed Gigabit access and SFP uplink interfaces used in small access-edge deployments. 14.88 Mpps forwarding rate is derived from the documented switching capacity using standard 64-byte line-rate calculation, giving buyers a practical throughput reference when comparing compact MS130 models. 120W PoE budget powers compatible endpoint devices across the eight copper ports, with up to 30W available per PoE port and allocation planned against the shared switch budget. MS130-8P-HW supports remote packet capture, automatic firmware upgrades, SNMP/Syslog integration, IPv4/IPv6 ACL support, 802.1Q VLAN tagging, DHCP snooping, and 802.1X authentication. Initial setup places the switch in a Dashboard organization, links it to a network, and lets it check in before policy configuration. The external power design uses 54VDC input through the supplied power adapter, and the 0°C to 45°C operating range matches standard indoor access environments. Supported 1G SFP options include short-reach fibre, long-reach fibre, and copper transceiver choices for upstream connectivity.
MS130-8P-HW belongs at the access tier, connecting IP phones, wireless access points, cameras, printers, workstations, badge readers, and other Gigabit endpoints before handing traffic upstream through the two 1G SFP interfaces. Physical stacking is not part of this model, so multi-switch consistency is handled through cloud templates and policy management rather than a stacking backplane. The switch occupies desktop or wall-mount space and does not consume a rack unit, which helps when cabinet depth, noise, or rack availability is limited. ORM Systems supplies this model in new and certified refurbished condition, with refurbished units checked for power behavior, PoE delivery, port operation, firmware readiness, and physical condition before dispatch. Request current pricing for single-unit replacement, project rollout, or volume procurement, with enterprise buyers able to align hardware, licensing, SFP modules, power accessories, and regional power requirements in one quote. Volume orders also support consistent spares planning across repeated small-site builds.
MS130-8P-HW price is is available on request. Get immediate quote.
Request bulk order quote for MS130-8P-HW for additional pricing. Browse the full Meraki MS130 Switches series or explore all Cisco products.
MS130-8P-HW sits at a small access edge and terminates copper runs from phones, cameras, access points, printers, and workstations on 8 Gigabit RJ-45 ports. The switch applies VLAN tagging, port settings, DHCP snooping, and 802.1X controls through the Meraki Dashboard while delivering a 120W PoE budget to powered endpoints. Its two 1G SFP uplinks carry access traffic toward upstream switching. The result is a managed low-density endpoint edge with controlled PoE delivery and clear cloud visibility.
MS130-8P-HW operates in a compact closet where local Gigabit endpoints hand traffic northbound through two 1G SFP uplink ports. Engineers match supported Meraki SFP modules such as MA-SFP-1GB-SX, MA-SFP-1GB-LX10, or MA-SFP-1GB-TX to the upstream switch and cable plant. The 8 RJ-45 access ports remain dedicated to endpoint connections while fibre or copper SFP uplinks carry trunks or access uplinks. The result is cleaner separation between endpoint cabling and upstream network handoff.
The switch occupies a remote access location where local staff need powered connectivity but network operations remain centralized. Administrators claim the device into the Meraki Dashboard, add it to the correct Dashboard network, then configure ports, VLANs, authentication settings, and firmware behavior remotely. MS130-8P-HW provides 8 Gigabit access ports, 2 1G SFP uplinks, fanless operation, and a 120W PoE budget in that role. The result is consistent small-site access control without local switch administration.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MS130-8P-HW |  MS130-48X-HW |  MS150-48FP-4X-HW |  MS150-24P-4X-HW |  MS150-48LP-4X-HW | |
|---|---|---|---|---|---|
| Depth | 150 mm | 340 mm | 340 mm | 250 mm | 340 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet / Multi-Gigabit (2.5G) | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet |
| Form Factor | Desktop | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Height | 28 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | MS130-8P-HW | MS130-48X-HW | MS150-48FP-4X-HW | MS150-24P-4X-HW | MS150-48LP-4X-HW |
| Media Type Supported | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber |
| Power Consumption | 128W | 808W | 891.4W | 422.2W | 460.6W |
| Power Source | DC | AC | AC | AC | AC |
| Product Type | Network Switch | Network Switch | Network Switch | Network Switch | Network Switch |
| Switching Capacity | 20 Gbps | 200 Gbps | 176 Gbps | 128 Gbps | 176 Gbps |
| Weight | 0.88 kg | 5.71 kg | 5.4 kg | 3.6 kg | 5.4 kg |
| Width | 222 mm | 440 mm | 482 mm | 482 mm | 482 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Cisco Meraki MS130-8P-HW is a cloud-managed Layer 2 access switch with 8x 1G RJ-45 ports, 2x 1G SFP uplinks, and a 120W PoE switch budget. It fits compact access deployments that need powered endpoint connectivity, Meraki Dashboard management, VLAN control, authentication features, and remote troubleshooting from a central cloud interface.
MS130-8P-HW identifies a Cisco Meraki MS130 series hardware switch with 8 Gigabit Ethernet access ports and PoE support. The 8P variant provides 120W of PoE power, while the HW suffix identifies the physical hardware appliance rather than a licence. Buyers should pair the hardware with the correct Meraki MS licence.
MS130-8P-HW is an enterprise network switch, specifically a compact cloud-managed access switch. It is not a router, firewall, wireless access point, or optical module. Its role is to connect wired endpoints, power PoE devices, provide Layer 2 switching, and hand traffic upstream through its two 1G SFP uplink interfaces.
MS130-8P-HW sits in the Cisco Meraki MS130 access switch family, below larger 24-port and 48-port MS130 models. It serves low-density access locations that need PoE+ on Gigabit copper ports without moving to a full rack-width switch. It is commonly considered alongside MS130-8, MS130-8P-I, and MS130-8X.
MS130-8P-HW includes 8x 1G RJ-45 access ports and 2x 1G SFP uplink ports. The copper ports connect endpoint devices such as access points, cameras, phones, printers, and workstations. The SFP interfaces provide fibre or copper transceiver uplink options, depending on the supported Meraki SFP module selected for the design.
MS130-8P-HW provides 20 Gbps switching capacity, matching its compact 8-port Gigabit access design with two 1G SFP uplinks. This capacity supports non-blocking Layer 2 forwarding for a small access edge when endpoint traffic and uplink design are planned correctly. Buyers should size uplinks around real traffic patterns, not only port count.
MS130-8P-HW supports 802.3bt PoE with up to 30W per PoE port and a 120W total switch PoE budget. This makes it suitable for powering access points, IP phones, cameras, and other compatible endpoint devices. The total device load should be checked against the 120W budget before ordering.
MS130-8P-HW is positioned as a Layer 2 access switch. It supports access-layer functions such as VLAN tagging, DHCP snooping, 802.1X authentication, ACL support, and port configuration through the Meraki Dashboard. It is best used for endpoint access rather than core routing, high-speed aggregation, or WAN edge routing.
MS130-8P-HW is managed through the Cisco Meraki Dashboard. Network teams claim the switch into a Dashboard organization, add it to a Dashboard network, connect it to the local network, and complete configuration after cloud check-in. Dashboard tools support firmware updates, remote packet capture, port visibility, VLAN settings, and operational monitoring.
MS130-8P-HW does not use physical switch stacking like modular enterprise access switches. Multiple MS130 switches are still managed centrally through the Meraki Dashboard, where administrators monitor ports, apply configuration templates, and standardize settings across sites. For designs requiring physical stack behavior, buyers should compare higher-tier Cisco access platforms before ordering.
MS130-8P-HW is used for compact access switching where a small number of wired endpoints need Gigabit connectivity and PoE power. It fits branch rooms, small network closets, desk-side deployments, and distributed access points. The 8x 1G copper ports handle endpoint handoff, while the two 1G SFP ports connect upstream infrastructure.
MS130-8P-HW suits low-density access environments that need fewer than ten wired access ports and up to 120W of PoE. It is practical where a full 24-port switch is unnecessary, but central cloud management is still required. Larger closets should compare MS130-24P-HW or MS130-48P-HW for higher port density.
MS130-8P-HW fits endpoint access workloads such as IP phones, wireless access points, security cameras, printers, badge readers, and small office workstations. The switch provides Gigabit edge connectivity, PoE power, VLAN segmentation, and Dashboard-based monitoring. It is not designed for high-density server access, 10G aggregation, or large distribution-layer switching.
MS130-8P-HW supports wireless access point edge deployments when the access points operate within Gigabit Ethernet and PoE budget requirements. The 120W switch budget allows multiple powered devices, while Dashboard management helps teams monitor port status and troubleshoot uplink or endpoint issues. Multigigabit wireless designs should compare MS130-8X-HW instead.
MS130-8P-HW works inside the Cisco Meraki cloud-managed switching ecosystem. It is claimed, configured, monitored, and updated through the Meraki Dashboard. The switch also supports operational integrations such as SNMP and syslog, allowing network teams to connect Meraki visibility with broader monitoring, logging, and incident response workflows.
MS130-8P-HW supports 1G SFP modules listed for MS130 SFP models, including MA-SFP-1GB-SX, MA-SFP-1GB-LX10, and MA-SFP-1GB-TX. These modules support fibre or copper uplink options depending on cabling distance and media type. Buyers should match the SFP module to the upstream switch, fibre plant, and required reach.
MS130-8P-HW supports 10/100/1000 Mbps RJ-45 Ethernet access and 802.3bt PoE delivery up to 30W per port. It also supports 802.1Q VLAN tagging and 802.1X authentication for access control. These standards make the switch suitable for common enterprise endpoints such as phones, cameras, access points, and workstations.
MS130-8P-HW integrates through its 1G RJ-45 access ports, 1G SFP uplinks, VLAN configuration, ACL support, DHCP snooping, and 802.1X authentication. The switch connects to upstream access or distribution infrastructure while Meraki Dashboard handles configuration and monitoring. Designs should confirm internet access for cloud check-in and ongoing Dashboard management.
MS130-8P-HW adds PoE support and a 120W PoE switch budget, while MS130-8-HW provides the same 8x 1G RJ-45 and 2x 1G SFP port layout without PoE. MS130-8-HW fits non-powered endpoints, while MS130-8P-HW is the better choice for access points, cameras, and phones.
MS130-8P-HW and MS130-8P-I-HW both provide 8x 1G RJ-45 ports, 2x 1G SFP uplinks, 120W PoE, and fanless operation. The key difference is power design: MS130-8P-HW uses an external power supply, while MS130-8P-I-HW uses an internal power supply. The right choice depends on mounting and cabling preference.
MS130-8P-HW provides 8x 1G RJ-45 ports, 2x 1G SFP uplinks, and 120W PoE. MS130-8X-HW provides 6x 1G RJ-45, 2x 2.5G RJ-45, 2x 10G SFP+ uplinks, and 120W PoE. MS130-8X-HW suits multigigabit access and faster uplinks, while MS130-8P-HW suits Gigabit PoE access.
MS130-8P-HW is a compact 8-port PoE access switch with 120W PoE and 2x 1G SFP uplinks. MS130-24P-HW increases access density to 24x 1G RJ-45 ports, 4x 1G SFP uplinks, and 370W PoE. MS130-8P-HW fits small access points, while MS130-24P-HW fits larger closets.
MS130-8P-HW price depends on condition, quantity, regional sourcing, licence requirements, accessories, and current market availability. New units, refurbished units, power accessories, supported SFP modules, and Meraki licensing can change the final project cost. ORM Systems can quote the switch alongside compatible licences and optics for a complete access deployment.
MS130-8P-HW can be sourced as new or refurbished hardware when market supply is available. New units suit standard refresh projects, while refurbished units can support cost-sensitive rollouts or spares planning. Buyers should confirm current condition, packaging, included accessories, warranty terms, and licence requirements at the quotation stage.
MS130-8P-HW is suitable for bulk orders where multiple small access locations require the same compact PoE switch. Availability depends on live supplier stock and condition mix. Bulk pricing is especially relevant when the order also includes Meraki licences, SFP modules, power cords, and repeat-site deployment quantities.
MS130-8P-HW belongs to the Cisco Meraki MS130 family, which is listed in current Meraki documentation. Buyers should still verify lifecycle status, entitlement requirements, and regional availability when ordering because hardware lifecycle notices and channel supply can change. ORM Systems can help align procurement with the required deployment timeline.
MS130-8P-HW lead time depends on quantity, condition, warehouse location, licence bundle, and whether accessories such as SFP modules or power cords are ordered together. Small single-unit orders are usually simpler to source than multi-site rollouts. Buyers should request a dated quote to confirm dispatch timing and available shipping options.
ORM Systems can supply MS130-8P-HW with warranty coverage depending on condition, source, and quotation terms. Warranty length should be confirmed before purchase, especially for refurbished hardware. Buyers should separate hardware warranty expectations from Cisco Meraki cloud licensing and support entitlement requirements, since those are different parts of the deployment.
Refurbished MS130-8P-HW units should be tested before dispatch for power, port operation, physical condition, and basic hardware functionality. For PoE switches, testing should also confirm powered port behavior where applicable. Buyers should confirm the included test process, warranty terms, accessory list, and cosmetic grade when purchasing refurbished Meraki hardware.
MS130-8P-HW is part of Cisco Meraki’s enterprise switching portfolio and should be reviewed against the official Cisco Meraki datasheet and regional compliance documentation for the target country. Buyers planning regulated deployments should confirm safety, EMC, environmental, and import requirements before purchase, especially when ordering internationally or using refurbished equipment.
MS130-8P-HW is configured by claiming the device in the Meraki Dashboard, adding it to a Dashboard network, connecting it to local infrastructure, powering it on, and allowing cloud check-in. After check-in, administrators configure VLANs, ports, authentication settings, firmware updates, and monitoring policies from the Dashboard interface.
MS130-8P-HW requires the appropriate Cisco Meraki MS licence for Dashboard management, firmware updates, monitoring, and cloud-managed operation. Cisco Meraki lists MS100 Small licence options for compact MS130 models, including Essentials and Advantage tiers. Buyers should match the licence term and tier to the organization’s Meraki licensing model.
MS130-8P-HW orders should account for the correct regional power cord, compatible 1G SFP modules, fibre patch leads, copper uplink modules, and any mounting needs. Cisco Meraki lists a 150W power adapter accessory for MS130-8P. Buyers should confirm what is included in the box before finalizing the order.
Buyers can purchase MS130-8P-HW from ORM Systems in the UK for Cisco Meraki access switch projects, replacement units, and multi-site procurement. ORM Systems can quote the hardware with compatible Meraki licences, supported SFP modules, and accessory requirements. A dated quote helps confirm price, condition, availability, and delivery options.
ORM Systems can support international enquiries for MS130-8P-HW, subject to product availability, export requirements, destination rules, and shipping feasibility. International buyers should confirm power cord region, licence requirements, warranty handling, and customs documentation before purchase. Bulk orders should include full delivery details so the quote reflects the correct logistics.
United States
