Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$72.55
$61.9314.6% off
Quantity:
WS-C3750V2-24PS-S
Cisco WS-C3750V2-24PS-S Catalyst 3750 v2 24-Port Fast Ethern...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
WS-C3750V2-24PS-S is a managed Layer 3 access switch with 24 copper 10/100 Mbps PoE ports, two fixed Gigabit SFP uplinks and the IP Base software image. The Catalyst 3750 v2 configuration combines powered endpoint connections with a full-width, 1U rack chassis for enterprise access environments. The copper connections are Fast Ethernet, not Gigabit Ethernet, so endpoint speed requirements matter independently of the faster uplinks. The discontinued WS-C3750V2-24TS-S omits PoE and serves existing installations whose endpoints receive power separately. Within the Cisco Catalyst 3750 family, this configuration addresses retained powered access connections rather than a Gigabit desktop upgrade.
WS-C3750V2-24PS-S price for new stock is is available on request. Get immediate quote. WS-C3750V2-24PS-S refurb price is $61.93.
Request bulk order quote for WS-C3750V2-24PS-S for additional pricing. Browse the full Cisco 3750 V2 Catalyst Switches series or explore all Cisco products.
370W of available PoE power establishes the aggregate allocation for connected powered devices. 560W power consumption provides the electrical planning figure for the switch and its supported load; that figure is distinct from the power available to endpoints. OSPF routing is available with IP Base, allowing the access switch to participate in a routed network without assuming the capabilities of the higher software image. WS-C3750V2-24PS-S supports SNMP management, with Telnet and SSH connectivity for administrative access. Management access and monitoring credentials remain separate configuration requirements from endpoint connectivity. The internal AC supply accepts 100–240V input, while an external redundant power system provides a separate power-input path rather than a second internal supply. PoE+ is not supported, so a powered connection alone does not establish compatibility with a higher-draw endpoint.
Order WS-C3750V2-24PS-S from ORM Systems in new sealed or certified refurbished condition, specifying the condition, required software image and complete accessory list on the purchase order. Certified refurbished units are inspected and bench-tested for power-on, POST, clean boot and rated-speed links on every port; PoE output is verified under load on every powered port, and firmware is verified with configuration wiped to factory default. New units carry up to a 3-year extended warranty, certified refurbished units up to 1 year, and every condition has 30-day returns; terms apply. For enterprise and volume orders, PO acceptance, Net-30 for government, RMA with advance replacement, and regional stock/RMA across the UK, EU, US and MEA are available.
| Key Specs | Key Spec Values |
|---|---|
License Tier | IP Base |
Port Configuration | 24 x 10/100 PoE, 2 x 1G SFP |
PoE Budget | 370W |
Max Power Draw | 560W |
Lifecycle Status | Cisco support ended May 31, 2021 |
Replacement PID | C9300L-24P-4G-A through discontinued WS-C3650-24PS-S |
An estate retaining the discontinued WS-C3750-24PS-S can use its named replacement when maintaining the older access configuration. Treat the replacement as a hardware and software acceptance exercise rather than assuming an existing configuration transfers unchanged. Specify the required software image and validate the intended configuration before placing the spare-unit order.
A replacement purchase for existing phones or other powered endpoints starts with each device's electrical requirement. The per-port power ceiling is 15.4W, so connector compatibility does not establish power compatibility. Inventory endpoint requirements individually, identify devices exceeding that ceiling, and specify the retained endpoint list before the purchase order.
Gigabit Ethernet at every endpoint
Copper access connections stop at 100 Mbps. C9300L-24P-4G-A provides Gigabit access in the current replacement chain and also changes the uplink configuration.
Powered devices exceeding 15.4W
The per-port power ceiling is 15.4W, excluding endpoints requiring more power from their switch connection. Specify another power source or a switch supporting the endpoint's requirement.
Active Cisco hardware service coverage
Cisco hardware service ended May 31, 2021. C9300L-24P-4G-A is the current replacement-chain endpoint; the intermediate WS-C3650-24PS-S is already discontinued and should not be treated as current.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Depth | 301 mm | 295 mm | 295 mm | 295 mm | 295 mm |
| Ethernet Technology | Fast Ethernet | Fast Ethernet | Fast Ethernet | Fast Ethernet | Fast Ethernet |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | WS-C3750V2-24PS-S | WS-C3750V2-24TS-E | WS-C3750V2-48TS-E | WS-C3750V2-48TS-S | WS-C3750V2-48PS-E |
| Power Consumption | 560W | 60W | 57W at 100% throughput | 57W at measured 100% throughput | 458W at 100% throughput with maximum PoE load |
| SFP Ports | 2 x 1GbE | 2 x 1GbE | 4 x 1GbE | 4 x 1GbE | 4 x 1GbE |
| Weight | 5.1 kg | 3.7 kg | 4.2 kg | 4.2 kg | 5 kg |
| Width | 445 mm | 443 mm | 443 mm | 443 mm | 443 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
WS-C3750V2-24PS-S identifies a Catalyst 3750 v2 switch with 24 Fast Ethernet PoE access ports, two Gigabit SFP uplinks and the Standard IP Base image. WS-C3750V2 identifies the family, 24 identifies access-port quantity, 24PS identifies the powered copper configuration with SFP uplinks, and the final -S selects the Standard image.
WS-C3750V2-24PS-S supports SNMP management and administrative connectivity through Telnet and SSH. SNMP versions 1, 2c and 3 are supported. Administrative access and monitoring therefore require configuration rather than operating as an unmanaged switch; specify the required access method and monitoring credentials when preparing the intended configuration.
WS-C3750V2-24PS-S is discontinued: end of sale was May 14, 2016, and Cisco hardware support ended May 31, 2021. Its original replacement, WS-C3650-24PS-S, is also discontinued. The replacement chain continues to C9300L-24P-4G-A, rather than stopping at the older Catalyst 3650 hardware when evaluating a current purchase.
ORM Systems offers WS-C3750V2-24PS-S new sealed or certified refurbished, with up to a 3-year extended warranty on new units and up to 1 year on certified refurbished units. Returns cover every condition for 30 days; terms apply. Cisco hardware warranty coverage and service ended May 31, 2021.
WS-C3750V2-24PS-S provides a 370W aggregate PoE budget with a 15.4W per-port ceiling across its 24 powered access connections. Endpoint requirements must satisfy both limits. The switch supplies PoE rather than PoE+, so devices requiring more power need a different power source or different switching hardware.
The Catalyst 3750 v2 24-port PoE configuration has two fixed Gigabit SFP uplink cages. These uplinks do not make the copper access connections Gigabit Ethernet, and they are not a removable uplink-card bay. Match the intended transceivers to the link requirements when specifying the complete connection.
A Catalyst 3750 v2 StackWise stack supports nine members operating as one logical switching unit. Supported family combinations include Catalyst 3750, Catalyst 3750 v2 and Catalyst 3750-E switches. A shared family name does not remove the need to validate the intended software combination before adding hardware to an existing stack.
WS-C3750V2-24PS-S comes with the IP Base image, identified as the Standard image in its ordering name. IP Services is the higher feature image and includes IPv6 routing. Specify the required image explicitly rather than assuming that identical port hardware supplies the same routing feature set across software variants.
The Catalyst 3750 v2 supports an external redundant power system in addition to its internal AC supply, rather than a second internal redundant supply. The internal input accepts 100–240V AC. External power-system compatibility and the required connection should be confirmed as part of the complete hardware configuration before ordering.
WS-C3750V2-24PS-S is the named replacement for the discontinued WS-C3750-24PS-S. Both ordering identities describe 24 Fast Ethernet PoE access connections and two SFP uplinks, but the replacement belongs to the v2 generation. WS-C3750V2-24PS-S is itself discontinued, so this relationship supports legacy identification rather than establishing a current upgrade recommendation.
WS-C3750V2-24PS-S supplies PoE on its copper access ports, while WS-C3750V2-24TS-S does not supply endpoint power. Both configurations have 24 Fast Ethernet access connections, two SFP uplinks and the Standard image. Both are discontinued; the powered configuration serves retained PoE endpoints, while the non-PoE configuration serves separately powered endpoints in existing estates.
WS-C3750V2-24PS-S has IP Base, while WS-C3750V2-24PS-E has the Enhanced IP Services image. The powered access-port and uplink configurations remain the same, but IP Services includes IPv6 routing. Both models are discontinued; IP Base addresses retained requirements within its feature set, while IP Services addresses legacy configurations requiring the higher image.
C9300L-24P-4G-A has four fixed 1G uplinks, while WS-C3750V2-24PS-S has two Gigabit SFP uplinks. C9300L-24P-4G-A is the current endpoint of the replacement chain through the discontinued WS-C3650-24PS-S. The older switch addresses retained legacy configurations; the current successor addresses buyers replacing that estate rather than preserving the original uplink arrangement.