Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,282.50
$29.0097.7% off
Quantity:
NIM-2FXO
Cisco NIM-2FXO 2-Port FXO Network Interface Module for ISR 4...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-2FXO is the Cisco 2-port Network Interface Module - FXO (Universal) with two FXO ports for ISR 4000 routers. The onboard DSP removes the host motherboard PVDM requirement for analog voice and provides 128-ms echo-tail echo cancellation. Cisco ISR 4000 NIM buyers use it in Cisco 4400 and 4300 Series ISRs, Catalyst 8300 and Catalyst 8200 edge platforms, VG420 voice gateways, C8375-E-G2, C8235-E-G2 and C8231-E-G2. It fits a NIM slot and uses a straight-through 2-wire cable to a PBX, key system or PSTN line. NIM-4FXO is the same FXO role with four ports; this part fills the two-port count.
NIM-2FXO price for new stock is $244.75, a 80.9% saving from the Cisco list price of $1,282.50. NIM-2FXO refurb price is $29.00. NIM-2FXO is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-2FXO for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
Two FXO ports provide loop-start or ground-start signaling, DTMF, MF or pulse dialing, caller ID, battery reversal detection and CAMA trunk use in North America. Managed OIR requires the voice ports to be on-hook and no active calls; surprise OIR is not supported. NIM-2FXO runs on Cisco IOS XE 17.3.2 on Catalyst 8300, 17.4.1 on C8200-1N-4T, 17.5.1 on C8200L-1N-4T, 17.6.1 on VG420 and 3.16 on ISR 4000. Secure router use starts with Cisco IOS XE 26.1 in Routing CLI mode. The module weighs 191 g and works with SCCP, H.323, SIP and MGCP 1.0 call control.
NIM-2FXO is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate inspected, and the module recognized by the host. Before the PO, confirm the router model, the free NIM slot, Cisco IOS XE release, Unified Communications technology package and 2-wire cabling. UK, EU, US and MEA regional stock and RMA with advance replacement apply, with PO accepted and Net-30 for government. New warranty is up to 3-year extended, certified refurbished warranty is up to 1 year, and returns are 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x FXO |
Fits | C8375-E-G2 / C8235-E-G2 / Catalyst 8300 |
Module Features | Onboard DSP / 128-ms echo-tail |
Requires | UC package for voice apps |
Slot | NIM slot, one per module |
Minimum Software | IOS XE 26.1 on Secure Routers |
In a mid-sized retail branch deploying a Cisco ISR router, the NIM-2FXO-Voice Module provides automatic PSTN failover when the IP WAN link degrades or fails. This ensures uninterrupted inbound/outbound voice connectivity, preserves customer service levels during outages, and drives up to 99.9% voice uptime for critical operations.
A manufacturing enterprise uses the 2-port FXO module in its Cisco ISRs to connect remote-site analog fax machines, alarm panels and credit-card terminals directly into its centralized VoIP infrastructure. The solution unifies management and billing, enables real-time call monitoring, and cuts analog trunk provisioning by up to 40%, maximizing ROI on existing hardware.
A global services firm deploys NIM-2FXO-Voice Modules at regional branch offices to route local and emergency calls directly to the PSTN rather than backhauling over the corporate WAN. This local-breakout strategy reduces toll charges by up to 25%, lowers voice latency, simplifies regulatory compliance, and delivers measurable OPEX savings across all sites.
A branch router needs two office-side analog trunks to a PBX, key system or PSTN line. The design uses one NIM slot and two FXO ports, with loop-start or ground-start signaling matched to the provider line. Count one module and two straight-through 2-wire cables before the PO.
A mixed Catalyst 8300 or Catalyst 8200 order needs analog voice in the same router as WAN modules. The buyer must reserve one NIM slot for the two FXO ports and leave other NIM or SM positions for Ethernet, serial or DSP modules. Match the chassis model and free slot before the PO.
A voice team stages SCCP, H.323, SIP or MGCP 1.0 analog call paths before a site cutover. The module supplies two FXO ports and onboard DSP in the lab host. Match Cisco IOS XE release, Unified Communications package and far-end signaling before the PO.
Four FXO trunks
NIM-2FXO provides two FXO ports. Use NIM-4FXO when the same NIM slot needs four FXO trunks on supported Cisco hosts.
Station-side FXS ports
NIM-2FXO provides office-side FXO ports for PBX, key-system or PSTN lines. Use NIM-2FXSP for two FXS, FXS-E and DID station ports.
Fixed secure router chassis
C8355-G2 has no NIM expansion slot, and only cellular modules apply to that model. NIM-2FXO fits C8375-E-G2 in the 8300 Secure Routers family.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | Network Interface Module | Ethernet | NIM |
| Form Factor | Plug-in Module | Plug-in Module | PCIe | Modular |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 23 March 2023
Simple installation and stable operation.
Reviewed on the 5 August 2018
Good value Cisco module.
Reviewed on the 23 August 2023
No call drops observed.
Reviewed on the 22 April 2023
Good value Cisco module.
Reviewed on the 16 April 2019
No call drops observed.
Reviewed on the 7 July 2026
FXO module delivered clean PSTN connectivity.
Reviewed on the 2 February 2021
Worked well with our voice gateway.
Reviewed on the 1 July 2025
FXO module delivered clean PSTN connectivity.
Reviewed on the 5 January 2020
Simple installation and stable operation.
Reviewed on the 25 December 2021
Worked well with our voice gateway.
NIM-2FXO is the Cisco 2-port Network Interface Module - FXO (Universal), a two-port FXO NIM for NIM slots in ISR 4000, Catalyst 8300, Catalyst 8200, VG420 and selected secure routers. NIM marks the Network Interface Module family, and FXO marks Foreign Exchange Office analog line ports.
NIM-2FXO fits C8375-E-G2, C8235-E-G2, C8231-E-G2, Catalyst 8300, Catalyst 8200, VG420, Cisco 4400 and Cisco 4300 ISR hosts with a NIM slot. C8355-G2 and the fixed 8200 secure router models do not take it because those models do not have a NIM slot. Cisco 2900 and 3900 ISRs are not supported.
A Catalyst 8300 uses NIM-2FXO for two FXO ports or NIM-4FXO for four FXO ports. The Catalyst 8300 voice module group also includes NIM-2FXSP, NIM-4FXSP, NIM-2FXS/4FXOP, NIM-4E/M, NIM-2BRI-NT/TE and NIM-4BRI-NT/TE. Count one NIM slot for each NIM.
NIM-2FXO provides two FXO ports. Each port connects to a PBX, key system or PSTN line and can use loop-start or ground-start signaling. The ports also handle caller ID, battery reversal detection and CAMA trunks for dedicated E-911 service in North America.
NIM-2FXO takes one NIM slot. C8375-E-G2, C8235-E-G2, C8231-E-G2, C8200-1N-4T and C8200L-1N-4T take one. Catalyst 8300 2RU models take two NIMs, Catalyst 8300 1RU models take one, VG420 takes two and ISR 4000 hosts take up to three integrated NIM slots.
NIM-2FXO needs Cisco IOS XE 26.1 in Routing CLI mode on 8200 and 8300 Secure Routers. Catalyst 8300 starts at Cisco IOS XE 17.3.2, Catalyst 8200 starts at 17.4.1 or 17.5.1 by model, VG420 starts at 17.6.1 and ISR 4000 uses 3.16 for IOS XE.
NIM-2FXO adds two FXO analog line ports with onboard DSP, 128-ms echo-tail echo cancellation, caller line ID, DTMF detection, fax pass-through, T.38 fax relay, modem pass-through, RTP, RTCP and RFC 4733 digit relay. Voice applications require the Unified Communications technology package where that package applies to the host.
NIM-2FXO can be inserted in supported Cisco 4000 ISR NIM slots without powering off the router. Managed OIR requires all voice ports to be on-hook and no active calls before removal or insertion. Surprise OIR is not supported, and ports may need no shutdown after insertion.
NIM-2FXO uses a straight-through 2-wire cable for FXO port connections. Match the far-end PBX, key system or PSTN line to loop-start or ground-start signaling and to DTMF, MF or pulse dialing. Country locale settings control call progress tones and related voice-port parameters.
NIM-2FXO has two FXO ports, and NIM-4FXO has four FXO ports. Both parts serve the same FXO role in the analog voice NIM family and use the same software release rows on ISR 4000, Catalyst 8300 and Catalyst 8200. Choose by the number of analog trunks.
NIM-2FXO terminates two FXO office-side analog lines from a PBX, key system or PSTN. NIM-2FXSP provides two FXS, FXS-E and DID station-side ports. Pick NIM-2FXO for office-line trunks and NIM-2FXSP for analog phones, fax endpoints or DID line use.
Cisco has not announced an end-of-sale date for NIM-2FXO. NIM-2FXO serves current Catalyst 8300, Catalyst 8200, VG420 and selected 8200 and 8300 Secure Router hosts, and it remains in the ISR 4000 voice interface rows with Cisco IOS XE, XE SD-WAN and vManage release values.
ORM offers NIM-2FXO as new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host. New units carry up to a 3-year extended warranty, certified refurbished units carry up to 1 year, and returns are 30 days on every condition; terms apply.