Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$3,927.50
$33.2299.2% off
Quantity:
NIM-2MFT-T1/E1
Cisco NIM-2MFT-T1/E1 2-Port T1/E1 RJ-45 Network Interface Mo...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-2MFT-T1/E1 is a Cisco Network Interface Module for 2-port clear-channel data and voice T1/E1 trunks in a Catalyst 8300 NIM slot. Two T1/E1 ports in one NIM slot are the edge over NIM-1MFT-T1/E1. Catalyst 8200, ISR 4000 and 1100 Terminal Services Gateway hosts also take it. Cisco Catalyst 8300 network interface module fit covers C8300 2N2S and 1N1S models, and Catalyst 8200 fit covers C8200 and C8200L 1N models. Voice service needs a PVDM4 module on the NIM and the UC technology package; data service uses the IP Base technology package.
NIM-2MFT-T1/E1 price for new stock is $391.65, a 90% saving from the Cisco list price of $3,927.50. NIM-2MFT-T1/E1 refurb price is $33.22. NIM-2MFT-T1/E1 is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-2MFT-T1/E1 for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
1.544 Mbps T1 and 2.048 Mbps E1 line rates define the far-end circuit to match on every port. NIM-2MFT-T1/E1 carries 2 channel groups per port for serial data, 1 PRI group per port, and 24 T1 or 31 E1 CAS groups per port for voice. Clear-channel data and MFT packet voice are enabled; unstructured E1 G.703 and channelized data are not. Drop-and-insert multiplexing, integrated DSU/CSU for T1 and DSU for E1, independent data clocking per port and front-panel carrier, loopback, alarm and enable LEDs provide staging indicators. A C1100 Terminal Services Gateway takes the module in data mode only, with no TDM subdivision or analog services.
Order NIM-2MFT-T1/E1 new sealed or certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate inspected, seats and locks in a compatible host, recognized by the host, and link at every rated speed. Before the PO, confirm the host, free NIM slot, PVDM4 and UC technology package for voice, and T1/E1 cabling. Regional stock and RMA with advance replacement cover UK, EU, US and MEA orders. PO accepted, Net-30 for government, 30 days on every condition, terms apply; warranty is new — up to 3-year extended and certified refurbished — up to 1 year.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x T1/E1 RJ-45 |
Fits | Catalyst 8300 / Catalyst 8200 / ISR 4000 |
Module Features | 2 ports in one NIM slot / drop-and-insert |
Requires | PVDM4 and UC package for voice |
Slot | NIM slot, one per free NIM slot |
Minimum Software | Catalyst 8300: Cisco IOS XE 17.3.2 |
Scenario: A multinational call center consolidates 10 legacy T1/E1 circuits onto Cisco routers equipped with the NIM-2MFT-T1/E1-2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module to centralize SIP trunking. Benefit: Achieves carrier-grade voice quality, reduces monthly trunking fees by 35%, and simplifies dial-plan management across regions.
Scenario: A high-frequency trading firm deploys the NIM-2MFT-T1/E1 module to create dedicated clear-channel T1/E1 links between trading desks and data centers. Benefit: Guarantees 1.5 Mbps of committed bandwidth with sub-millisecond latency, ensuring real-time market data delivery and regulatory audit compliance.
Scenario: A regional ISP uses the NIM-2MFT-T1/E1-2 port Multi-flex Trunk module to aggregate multiple T1/E1 lines for customer branch offices. Benefit: Delivers up to 3 Mbps of burstable backhaul with seamless failover, boosting uptime to 99.999% and reducing OPEX through centralized provisioning.
A branch router with a failed 2-port T1/E1 voice/WAN NIM needs the same port density, same host family and same software floor. The buyer counts the free NIM slot, matches the host model, and orders the PVDM4 voice dependency before the PO.
A voice gateway project with T1 or E1 trunks needs packet voice, PRI or CAS capacity in a NIM slot. The buyer counts 24 T1 or 31 E1 voice groups per port, matches one clocking plan per card, and orders the UC technology package before the PO.
A WAN data circuit using T1, fractional T1, E1 or fractional E1 needs clear-channel data and two channel groups per port. The buyer matches the far-end T1 or E1 rate, confirms IP Base on the host, and orders one module for each required NIM slot before the PO.
Channelized data or G.703
NIM-2MFT-T1/E1 carries clear-channel data and does not carry unstructured E1 G.703 or channelized data; use NIM-2CE1T1-PRI for those functions.
Four ports per NIM slot
NIM-2MFT-T1/E1 provides 2 external T1/E1 ports in one NIM slot; use NIM-4MFT-T1/E1 where the same host needs 4 T1/E1 ports.
Cisco 2900 or 3900 ISR
Cisco 2900 and 3900 Integrated Services Routers do not take these fourth-generation T1/E1 NIMs; choose a host with NIM slots named for this module.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | Network Interface Module | Storage Module | WAN Module |
| Form Factor | Plug-in Module | Single-Wide | Single-Wide | Modular |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 10 September 2025
Dual port T1 E1 module delivered consistent WAN links.
Reviewed on the 29 July 2019
Stable performance for voice and data.
Reviewed on the 2 March 2022
Good choice for branch connectivity.
Reviewed on the 23 September 2021
Satisfied with reliability.
Reviewed on the 28 February 2025
Dual port T1 E1 module delivered consistent WAN links.
Reviewed on the 7 April 2024
Good choice for branch connectivity.
Reviewed on the 31 July 2022
Satisfied with reliability.
Reviewed on the 25 May 2017
Easy to configure and monitor.
Reviewed on the 5 February 2020
Easy to configure and monitor.
Reviewed on the 16 September 2022
Stable performance for voice and data.
NIM-2MFT-T1/E1 is the Cisco 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module. NIM means Network Interface Module, MFT means Multiflex Trunk, and T1/E1 names the trunk types. The module provides 2 T1/E1 ports for Catalyst 8300, Catalyst 8200, ISR 4000 and 1100 Terminal Services Gateway NIM slots.
NIM-2MFT-T1/E1 fits Catalyst 8300, Catalyst 8200, ISR 4000 and 1100 Terminal Services Gateway hosts with free NIM slots. ISR 4000 models named for the module are 4461, 4451, 4431, 4351, 4331, 4321 and 4221. Cisco 2900 and 3900 Integrated Services Routers do not take this fourth-generation T1/E1 NIM.
A Catalyst 8300 uses NIM-2MFT-T1/E1 for 2-port clear-channel data and voice T1/E1 service. The same Catalyst 8300 voice module list also carries NIM-1MFT-T1/E1, NIM-4MFT-T1/E1 and NIM-8MFT-T1/E1. Choose the port count that matches the T1/E1 trunks and free NIM slots.
NIM-2MFT-T1/E1 provides 2 external T1/E1 ports. T1 ports run at 1.544 Mbps transmit and receive rates, and E1 ports run at 2.048 Mbps transmit and receive rates. The far end must match T1 or E1 framing, line coding and clocking on the same card.
NIM-2MFT-T1/E1 uses a NIM slot. C8300 2N2S models take 2 NIMs, C8300 1N1S and Catalyst 8200 models take 1 NIM, ISR 4461, 4451, 4431 and 4351 models take 3 NIMs, and ISR 4331, 4321 and 4221 models take 2 NIMs.
NIM-2MFT-T1/E1 adds 2 T1/E1 ports in one NIM slot, clear-channel data, MFT packet voice, drop-and-insert multiplexing, integrated DSU/CSU for T1 and integrated DSU for E1. A PVDM4 module on the NIM is necessary for voice features, and the UC technology package is necessary for voice applications.
NIM-2MFT-T1/E1 needs Cisco IOS XE 17.3.2 on Catalyst 8300, 17.4.1 on C8200-1N-4T, 17.5.1 on C8200L-1N-4T and 3.10 on ISR 4000. The 1100 Terminal Services Gateway first takes the T1/E1 NIM in data mode in Cisco IOS XE 17.3.8a.
NIM-2MFT-T1/E1 runs in data mode on a 1100 Terminal Services Gateway. That host does not take TDM subdivision or analog services with the Cisco T1/E1 NIM feature. Use the C1100 single NIM slot for data mode and use Catalyst 8300, Catalyst 8200 or ISR 4000 for the voice feature set.
NIM-2MFT-T1/E1 gives 2 T1/E1 ports in one NIM slot, while NIM-1MFT-T1/E1 gives 1 T1/E1 port. Both are MFT clear-channel data and voice modules with 2 channel groups per port. Choose NIM-2MFT-T1/E1 when two trunks must land in the same NIM slot.
NIM-2MFT-T1/E1 is the 2-port MFT clear-channel data and voice module without unstructured E1 G.703 or channelized data. NIM-2CE1T1-PRI is the 2-port channelized data version with G.703 capability. Choose NIM-2CE1T1-PRI when the host needs channelized data or unstructured E1 G.703.
Cisco has not announced an end-of-sale date for NIM-2MFT-T1/E1. The module serves Catalyst 8300, Catalyst 8200, ISR 4000 and 1100 Terminal Services Gateway hosts. Cisco stopped selling the ISR 4000 Series on 20 January 2025, and Cisco service for the ISR 4000 Series ends on 31 January 2030.
ORM offers NIM-2MFT-T1/E1 new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host, recognized by the host and linked at every rated speed. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30 days on every condition, terms apply.