Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,355.76
$134.2390.1% off
Quantity:
NIM-ES2-8
Cisco NIM-ES2-8 8-Port 1G RJ-45 Network Interface Module for...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-ES2-8 is a Network Interface Module, the Cisco 8-Port Gigabit Ethernet Switch NIM, with eight 10/100/1000 RJ-45 Layer 2 switch ports for Catalyst 8300. Its edge over NIM-ES2-4 is four additional RJ-45 switch ports in a single-wide NIM. The Cisco Catalyst 8300 Network Interface Module also fits Catalyst 8200 and 4000 Series ISR NIM slots, with Catalyst 8300 2RU models taking two native NIMs and 1RU Catalyst 8300 or Catalyst 8200 models taking one. The 8-port Gigabit Ethernet switch NIM connects PCs, workstations, routers, switches, servers and network components inside the routed branch chassis.
NIM-ES2-8 price for new stock is $416.85, a 69.3% saving from the Cisco list price of $1,355.76. NIM-ES2-8 refurb price is $134.23. NIM-ES2-8 is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-ES2-8 for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
1 Gbps per port runs at 10 Mbps, 100 Mbps or 1 Gbps, and 1000BASE-TX cabling uses Category 5e or Category 6 RJ-45 patch leads. A 1 Gbps connection to the MGF carries direct module-to-module traffic, and Layer 2 switching runs at Gigabit Ethernet line rate on each onboard port. Sixty VLANs, 4094 VLAN IDs, four QoS queues per port, local SPAN and intrachassis cascading define the switching scale. NIM-ES2-8 uses hot OIR on Cisco 4000 Series ISR, and a blank filter plate fills an empty subslot after removal. Cisco IOS XE 17.3.2 is the Catalyst 8300 floor; Catalyst 8200 uses 17.4.1 or 17.5.1 by model.
NIM-ES2-8 is offered as new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate inspected, and every port links at every rated speed. Before the PO, confirm the Catalyst 8300, Catalyst 8200 or 4000 Series ISR chassis, the free NIM slot and RJ-45 cabling. UK, EU, US and MEA regional stock/RMA applies, with RMA with advance replacement. PO accepted and Net-30 for government. New carries up to 3-year extended warranty, certified refurbished carries up to 1 year, and returns are 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 8 x 10/100/1000 RJ-45 |
Capacity | 1 Gbps MGF connection / 60 VLANs maximum |
Fits | Catalyst 8300 / Catalyst 8200 / 4000 Series ISR |
Module Features | Eight RJ-45 ports / line-rate Layer 2 forwarding |
Lifecycle Status | End-of-sale passed 5 March 2025 |
Replacement PID | C-NIM-8T |
In a multinational enterprise with dozens of branch offices, IT teams install Cisco 4000 Series ISRs equipped with the NIM-ES2-8 8-Port Gigabit Ethernet Switch Module to consolidate voice, video and data LAN segments onto a single platform. The integrated wire-speed switching and advanced QoS deliver 40% higher throughput, simplified rack footprint and centralized management, reducing CAPEX/OPEX while streamlining day-to-day network operations.
A large university deploys Cisco ISR 4000 routers with the NIM-ES2-8 module to enforce port-based VLANs for students, faculty and research labs. By leveraging integrated switching and the router’s security policies, the IT team achieves strict traffic isolation, automated access control and granular audit logs—enhancing the campus security posture, accelerating VLAN provisioning by 30% and ensuring compliance with data-privacy regulations.
An automotive manufacturer equips production-line floor routers with the NIM-ES2-8 module on Cisco 4000 Series ISRs to connect high-density sensors, PLCs and wireless APs. The 8-port Gigabit switch delivers deterministic low-latency connectivity while the ISR enforces QoS and distributed firewall policies. This architecture drives real-time telemetry with sub-0.1% packet loss, accelerates predictive maintenance analytics and boosts overall equipment effectiveness (OEE).
A buyer has a failed eight-port EtherSwitch NIM in a Catalyst 8300, Catalyst 8200 or 4000 Series ISR. The replacement must match the NIM slot, RJ-45 cabling and Cisco IOS XE floor before the PO. Count one module per free NIM slot.
A branch router needs eight extra 10/100/1000 copper switch ports without using an SM slot. The single-wide NIM consumes one NIM slot and keeps the SM bay open on Catalyst 8300 1RU or 2RU chassis. Count available NIM slots and the RJ-45 patch leads.
A Catalyst 8300 2RU build takes two native NIMs, while a Catalyst 8300 1RU or Catalyst 8200 build takes one. The buyer reserves each NIM slot for the eight-port module and keeps a blank in any empty NIM opening before the PO.
PoE endpoint power
NIM-ES2-8 is the non-PoE eight-port module. Use NIM-ES2-8-P when the host must power PoE or PoE+ phones, access points or cameras.
Layer 2/3 MACsec switching
NIM-ES2-8 is a Layer 2 Gigabit Ethernet switch NIM. Use C-NIM-8T when Catalyst 8300 or Catalyst 8200 needs 1G LAN/WAN MACsec and optional Layer 3 switching.
Only four copper ports
NIM-ES2-8 uses the eight-port form factor. Use NIM-ES2-4 when the Cisco 4000 Series ISR build only needs four non-PoE Gigabit Ethernet ports.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | Network Interface Module | Network Interface Module | Network Interface Module |
| Form Factor | Single-Wide | Plug-in Module | Single-Wide | Single-Wide |
| Weight | 0.108 kg | 0.191 kg | 0.079 kg | 0.24 kg |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 7 June 2021
Eight port switch module expanded LAN capacity efficiently.
Reviewed on the 20 January 2018
Ports came online instantly with no issues.
Reviewed on the 2 August 2021
Reliable Layer 2 switching.
Reviewed on the 26 July 2025
Clean integration with ISR platform.
Reviewed on the 24 January 2017
Good performance for branch offices.
Reviewed on the 7 July 2019
Eight port switch module expanded LAN capacity efficiently.
Reviewed on the 19 December 2022
Ports came online instantly with no issues.
Reviewed on the 8 November 2024
Reliable Layer 2 switching.
Reviewed on the 18 August 2017
Clean integration with ISR platform.
Reviewed on the 10 April 2020
Good performance for branch offices.
NIM-ES2-8 is the Cisco 8-Port Gigabit Ethernet Switch NIM, ordered as the 8-port Layer 2 GE Switch Network Interface Module. It adds eight 10/100/1000 RJ-45 switched Ethernet ports to a NIM slot. NIM means Network Interface Module, and the part serves Catalyst 8300, Catalyst 8200 and Cisco 4000 Series ISR hosts.
NIM-ES2-8 fits C8300-2N2S-4T2X, C8300-2N2S-6T, C8300-1N1S-4T2X, C8300-1N1S-6T, C8200-1N-4T, C8200L-1N-4T and Cisco 4000 Series ISR NIM slots. The 4000 Series ISR models include 4461, 4451, 4431, 4351, 4331, 4321 and 4221. It requires the host software floor for that model.
A Catalyst 8300 uses NIM-ES2-8 as an eight-port Gigabit Ethernet switch NIM. Catalyst 8300 also takes NIM-ES2-4, NIM-ES2-8-P, C-NIM-8T, C-NIM-8M and C-NIM-4X as Ethernet switch NIMs. The 2RU models take two native NIM slots, and 1RU models take one.
NIM-ES2-8 provides eight RJ-45 Ethernet switch ports. Each port runs at 10 Mbps, 100 Mbps or 1 Gbps with autosensing, autonegotiation and Auto-MDIX. 1000BASE-TX links use Category 5e or Category 6 UTP cabling, and a Gigabit Ethernet port trunks to another switch or NIM-ES2 module.
NIM-ES2-8 count follows the available NIM slots. C8300-2N2S-4T2X and C8300-2N2S-6T take two native NIMs; C8300-1N1S-4T2X, C8300-1N1S-6T, C8200-1N-4T and C8200L-1N-4T take one. Cisco 4221, 4321 and 4331 take two eight-port non-PoE NIMs; Cisco 4351, 4431 and 4451 take three.
NIM-ES2-8 adds eight RJ-45 ports, line-rate Layer 2 forwarding on each onboard port and a 1 Gbps MGF connection for direct module-to-module traffic. The switching feature set includes 60 VLANs, 4094 VLAN IDs, IGMP snooping, local SPAN, four QoS queues per port, intrachassis cascading and RMON.
NIM-ES2-8 requires Cisco IOS XE 17.3.2, XE SD-WAN 17.3.2 and vManage 20.3.2 on Catalyst 8300. Catalyst 8200 uses 17.4.1 on C8200-1N-4T and 17.5.1 on C8200L-1N-4T. Cisco 4000 Series ISR uses IOS XE 3.15.0, except Cisco 4221 uses IOS XE 16.4.1.
C-NIM-8T is the replacement PID for NIM-ES2-8. C-NIM-8T is the Cisco NIM Switch Module 8-port 1G RJ45, and Catalyst 8300 and Catalyst 8200 take it for 1G RJ-45 Layer 2/3 LAN/WAN switching. Confirm the host software release before moving from the retired PID.
NIM-ES2-8 has eight 10/100/1000 RJ-45 switch ports, while NIM-ES2-4 has four 10/100/1000 RJ-45 switch ports. Both are single-wide non-PoE Layer 2 Gigabit Ethernet NIMs for the same Cisco 4000 Series ISR platform set. Choose NIM-ES2-8 when one slot must deliver eight copper switch ports.
NIM-ES2-8 is the eight-port non-PoE Layer 2 Gigabit Ethernet Switch NIM, while NIM-ES2-8-P is the eight-port PoE/PoE+ version. NIM-ES2-8 suits data-only copper switching. NIM-ES2-8-P suits hosts that need PoE or PoE+ power on all eight ports and the required power supply budget.
NIM-ES2-8 is the older Layer 2 1G RJ-45 switch NIM with Cisco end-of-sale already passed. C-NIM-8T is the replacement PID and adds 1G RJ-45 Layer 2/3 LAN/WAN switching with MACsec on Catalyst 8300 and Catalyst 8200. Use the host release tied to the chosen PID.
Cisco stopped selling NIM-ES2-8 on 5 March 2025. The last ship date passed on 5 June 2025, software maintenance ended on 5 March 2026, vulnerability support ends on 5 March 2028, and Cisco service ends on 31 March 2030.
ORM offers NIM-ES2-8 as new sealed and certified refurbished. New carries up to 3-year extended warranty; certified refurbished carries up to 1 year after being inspected and bench-tested in a compatible host. Cisco service ends 31 March 2030. Returns are 30 days on every condition; terms apply.