Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$745.17
$223.6570% off
Quantity:
NIM-1T
Cisco NIM-1T 1-Port 8 Mbps Smart Serial Network Interface Mo...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-1T is a Cisco 1-Port Serial WAN Interface Card, a single-wide Network Interface Module with one 8 Mbps Smart Serial port for Catalyst 8300. The one-port design makes it the lowest-density serial WAN member beside NIM-2T and NIM-4T in the same 8 Mbps family. Catalyst 8200 and ISR 4451-X take it in NIM slots. A Cisco Catalyst 8300 Network Interface Module also sits in an SM-X slot through C-SM-NIM-ADPT, and the carrier holds two NIMs. Catalyst 8200 models take one NIM, while ISR 4451-X takes three. Order the Smart Serial cable that matches V.35, EIA-232, EIA-449, EIA-530, EIA-530A or X.21.
NIM-1T price for new stock is $383.25, a 48.6% saving from the Cisco list price of $745.17. NIM-1T refurb price is $223.65. NIM-1T is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-1T for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
8 Mbps per port is the synchronous serial ceiling, and the port runs EIA-232, EIA-449, EIA-530, EIA-530A, V.35 or X.21 with the matching Cisco Smart Serial cable. HDLC, PPP and Frame Relay are the WAN protocol targets; Bisynchronous and X.25 are not supported. NIM-1T has a singlewide NI form factor with no slot restrictions. Online insertion applies in a direct NIM slot, while full online insertion and removal applies through C-SM-NIM-ADPT. Cisco IOS XE 3.12 and the IP Base feature set are the ISR 4451-X floor. Catalyst 8300 starts at Cisco IOS XE 17.3.2, and Catalyst 8200 starts at 17.4.1 or 17.5.1 by model.
NIM-1T is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate are inspected and the module is recognized by the host. Before the PO, confirm the Catalyst 8300, Catalyst 8200 or ISR 4451-X chassis, the free NIM slot, any C-SM-NIM-ADPT use and the Smart Serial cable. UK, EU, US and MEA teams handle RMA with advance replacement; PO accepted and Net-30 for government. New warranty extends up to 3-year extended, certified refurbished warranty extends up to 1 year, and returns are 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 1 x 8 Mbps Smart Serial |
Fits | Catalyst 8300 / Catalyst 8200 / ISR 4451-X |
Module Features | One-port serial WAN; HDLC, PPP, Frame Relay |
Requires | C-SM-NIM-ADPT for SM-X slots |
Slot | Singlewide NIM; up to 6 in C8300 |
Minimum Software | ISR 4451-X XE 3.12; C8200 XE 17.4.1 |
A buyer has one dedicated point-to-point, HDLC, PPP or Frame Relay serial handoff and needs one Smart Serial port in a NIM slot. Count one NIM-1T per circuit and one matching Cisco Smart Serial cable per port before the PO.
A Catalyst 8300 build needs more NIM positions than the direct NIM slots provide. C8300-2N2S models run 2 NIM slots and 2 SM slots, or 6 NIMs with C-SM-NIM-ADPT carriers. Count the carrier slots and cable types before the PO.
A mixed Catalyst 8200 and ISR 4451-X estate needs the same one-port serial NIM for field replacement. Catalyst 8200 models take one NIM, and ISR 4451-X takes three. Count the installed serial circuits and keep the cable protocol matched.
Two or four serial ports
NIM-1T provides 1 Smart Serial port at 8 Mbps. Use NIM-2T for two ports or NIM-4T for four ports in the same serial NIM family.
X.25 or Bisynchronous protocol
Bisynchronous and X.25 are not supported on the 1-, 2- and 4-port serial NIM family. Keep NIM-1T for HDLC, PPP and Frame Relay serial links.
Catalyst 8200 SM density
Catalyst 8200 edge platforms take 1 NIM and 1 PIM and do not take Service Modules. Use Catalyst 8300 with C-SM-NIM-ADPT for two NIMs in an SM-X slot.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Data Rate | 8 Mbps | 1G | T1/E1 | 1G | T1/E1 |
| Depth | 183.9 mm | 184 mm | 183.9 mm | 122 mm | 183.9 mm |
| Height | 31.8 mm | 32 mm | 31.8 mm | 21 mm | 31.8 mm |
| Module Type | Network Interface Module | Network Interface Module | Network Interface Module | Network Interface Module | Network Interface Module |
| Operating Temperature | 0°C to 40°C | 0°C to 40°C | 0°C to 50°C | 0°C to 40°C | 0°C to 50°C |
| Width | 88.9 mm | 89 mm | 88.9 mm | 79 mm | 88.9 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 19 January 2026
NIM-1T delivered dependable serial WAN connectivity.
Reviewed on the 19 January 2021
Stable performance for legacy circuits.
Reviewed on the 26 September 2017
Smooth installation process.
Reviewed on the 17 June 2020
Reliable serial interface module.
Reviewed on the 26 January 2020
Professional ISR interface expansion.
Reviewed on the 19 October 2022
Consistent uptime in production.
NIM-1T is the Cisco 1-Port Serial WAN Interface Card, a single-wide Network Interface Module with one 8 Mbps Smart Serial port. NIM means Network Interface Module, 1 identifies one port, and T identifies the serial WAN interface family for Catalyst 8300, Catalyst 8200 and ISR 4451-X.
NIM-1T fits Catalyst 8300, Catalyst 8200 and ISR 4451-X hosts named for this serial NIM. Catalyst models include C8300-2N2S-4T2X, C8300-2N2S-6T, C8300-1N1S-4T2X, C8300-1N1S-6T, C8200-1N-4T and C8200L-1N-4T. SM-X slot use needs C-SM-NIM-ADPT.
A Catalyst 8300 uses NIM-1T, NIM-2T and NIM-4T for serial WAN interfaces. NIM-1T gives one Smart Serial port, NIM-2T gives two, and NIM-4T gives four. Catalyst 8300 also takes C-SM-NIM-ADPT when two NIMs must sit in one SM-X slot.
NIM-1T has 1 Smart Serial port with a synchronous maximum speed of 8 Mbps per port. The port runs EIA-232, EIA-449, EIA-530, EIA-530A, V.35 or X.21. The far end must match the selected serial interface and cable type.
NIM-1T uses Cisco Smart Serial cables. Cable choices are CAB-SS-V35MT, CAB-SS-V35FC, CAB-SS-232MT, CAB-SS-232FC, CAB-SS-449MT, CAB-SS-449FC, CAB-SS-X21MT, CAB-SS-X21FC, CAB-SS-530MT and CAB-SS-530AMT. Order the DTE or DCE cable that matches the circuit handoff.
ISR 4451-X takes 3 NIM-1T modules. C8300-2N2S models take 2 direct NIMs and reach 6 NIMs with C-SM-NIM-ADPT carriers. C8300-1N1S models take 1 direct NIM and reach 3 NIMs with carriers. C8200-1N-4T and C8200L-1N-4T take 1 NIM.
NIM-1T gives the host one-port serial WAN connectivity at 8 Mbps per port. The module carries synchronous serial service and targets HDLC, PPP and Frame Relay. Bisynchronous and X.25 are not supported, so the serial circuit design must stay within those protocol limits.
NIM-1T requires Cisco IOS XE 3.12 or later and the IP Base feature set on ISR 4451-X. C8200-1N-4T needs IOS XE 17.4.1 for IOS XE mode and 17.5.1 for XE SD-WAN. C8200L-1N-4T needs 17.5.1 across the named software modes.
NIM-1T is the one-port member of the 8 Mbps Smart Serial NIM family, while NIM-2T adds a second Smart Serial port. Use NIM-1T when the router has one serial handoff. Use NIM-2T when the same host needs two serial handoffs in one NIM slot.
NIM-1T provides 1 Smart Serial port, while NIM-4T provides 4 Smart Serial ports in the same 8 Mbps serial family. Use NIM-1T for a single circuit. Use NIM-4T when port density matters more than preserving unused serial ports.
NIM-1T is a Smart Serial NIM for EIA-232, EIA-449, EIA-530, EIA-530A, V.35 and X.21 links at 8 Mbps per port. SM-X-1T3/E3 is a 1-port clear-channel T3/E3 service module. Use the module that matches the carrier handoff.
Cisco has not announced an end-of-sale date for NIM-1T. The module serves Catalyst 8300, Catalyst 8200 and ISR 4451-X hosts named for this serial NIM. Confirm the host model and software release because the required release differs between ISR 4451-X and Catalyst 8200 models.
ORM offers NIM-1T new sealed and certified refurbished. Cisco 90-Day Limited Hardware Warranty applies to new Cisco hardware terms, while ORM offers up to 3-year extended warranty on new units and up to 1 year on certified refurbished units. Returns are 30 days on every condition; terms apply.