Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,772.70
$26.2598.5% off
Quantity:
NIM-4FXO
Cisco NIM-4FXO 4-Port FXO Network Interface Module for 8200...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-4FXO is a Cisco 4-port FXO Network Interface Module for analog voice trunks in a NIM slot on 8200 Secure Routers. Four FXO ports give twice the PSTN or PBX handoffs of NIM-2FXO in the same NIM role. It also fits Catalyst 8300, Catalyst 8200, and 4000 Integrated Services Routers where the host release takes analog voice NIMs. Cisco ISR 4000 Network Interface Module buyers use the integrated NIM slot or the NIM carrier card in an SM-X slot. The Cisco 4-port FXO NIM connects straight-through 2-wire lines to PBX or key systems, or to PSTN off-premises connections for E-911 CAMA trunks in North America.
NIM-4FXO price for new stock is $126.00, a 92.9% saving from the Cisco list price of $1,772.70. NIM-4FXO refurb price is $26.25. NIM-4FXO is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-4FXO for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
4 FXO ports provide loop-start or ground-start signaling for analog trunks. 128-ms echo-tail echo cancellation runs on the onboard DSP, so the router motherboard does not need a dedicated PVDM for this voice module. NIM-4FXO also carries caller ID, battery-reversal detection, call detail record information, cable detection and overload protection. Straight-through 2-wire cabling is used on the FXO connections. The module weighs 0.20 kg. Hot insertion uses the host OIR process, but surprise OIR is not used and managed OIR is not used while active calls are present. After insertion, bring any shutdown voice ports back online.
NIM-4FXO is offered in new sealed and certified refurbished condition. Certified refurbished units are inspected and bench-tested in a compatible host, with connectors, cages, latch and faceplate inspected and recognized by the host. Before the PO, confirm the host, the free NIM slot, the Unified Communications technology package and the straight-through 2-wire cable. Regional stock and RMA coverage run through UK, EU, US and MEA; PO accepted, Net-30 for government and RMA with advance replacement. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition · terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x FXO analog voice |
Fits | 8200 Secure / Catalyst 8300 / Catalyst 8200 |
Module Features | Onboard DSP / 128-ms echo cancellation |
Requires | Unified Communications technology package |
Slot | NIM slot, OIR with call checks |
Minimum Software | IOS XE 26.1 on 8200 Secure Routers |
In a medium-sized call center deploying Cisco ISR routers, the NIM-4FXO 4-port Network Interface Module FXO (Universal) delivers automatic PSTN line failover when SIP trunks go down, ensuring uninterrupted agent connectivity. This solution boosts uptime to 99.9%, minimizes lost calls, and optimizes operational costs through seamless analog-to-VoIP integration.
A national retail chain equips its remote outlets with NIM-4FXO 4-port FXO (Universal) modules on Cisco routers to bridge legacy analog trunks into the VoIP network, enabling both inbound PSTN calls and outbound dialing. The integration reduces carrier expenses by up to 30%, simplifies telecom management, and compresses deployment time from days to hours.
A large corporate IT team deploys NIM-4FXO modules on ISR routers to establish an automated PSTN backup path for its unified communications platform, guaranteeing voice service continuity during SIP provider outages. The outcome is enhanced business resilience, full regulatory compliance, and near-zero disruption with minimal infrastructure changes.
A buyer has a failed four-port FXO NIM in a router that already carries analog trunks. NIM-4FXO keeps the same four-port FXO role and 2-wire cabling. Count the free NIM slot, the host release and the Unified Communications technology package before the PO.
A branch needs four extra PSTN or PBX handoffs without adding FXS station ports. NIM-4FXO adds four FXO ports in one NIM slot, with loop-start or ground-start configuration. Count trunks, straight-through 2-wire cables and free NIM slots before the PO.
A buyer maintains 4000 Integrated Services Routers after the 20 January 2025 host end-of-sale date. NIM-4FXO remains a like-for-like spare for supported models that take analog voice NIMs. Match ISR model, free slot and service end date before the PO.
ISR 4221 host builds
ISR 4221 does not take NIM-4FXO. Use an ISR 4321, 4331, 4351, 4431, 4451-X or 4461 host when this FXO NIM is required.
FXS station ports
NIM-4FXO carries four FXO ports only. NIM-4FXSP carries four FXS, FXS-E and DID ports for station-side analog voice requirements.
Live-call module changes
NIM-4FXO does not use surprise OIR, and managed OIR is not used with active calls. Move calls to ONHOOK state before the module change.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | Network Interface Module | Storage Module | Network Interface Module |
| Form Factor | Plug-in Module | Single-Wide | Single-Wide | Single-Wide |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 15 February 2020
FXO ports delivered clear analog call quality.
Reviewed on the 24 May 2020
Reliable module for PSTN integration.
Reviewed on the 8 August 2022
No echo or signaling issues experienced.
Reviewed on the 18 June 2023
Works well with Cisco voice gateways.
Reviewed on the 27 April 2025
No echo or signaling issues experienced.
Reviewed on the 9 May 2023
Works well with Cisco voice gateways.
Reviewed on the 20 August 2020
Solid voice expansion module.
Reviewed on the 1 March 2021
Solid voice expansion module.
Reviewed on the 15 October 2021
FXO ports delivered clear analog call quality.
Reviewed on the 29 December 2017
Reliable module for PSTN integration.
NIM-4FXO is the Cisco 4-port Network Interface Module - FXO (Universal). NIM marks the router Network Interface Module form, 4 marks four analog voice ports, and FXO marks Foreign Exchange Office interfaces. The module gives a supported router four PBX, key-system or PSTN voice handoffs.
NIM-4FXO fits 8200 Secure Routers, Catalyst 8300, Catalyst 8200, and 4000 Integrated Services Routers that take analog voice NIMs. ISR 4221 does not take it. ISR 4000 voice applications require the Unified Communications technology package, and 4000 Series ISRs can also use a NIM carrier card in an SM-X slot.
A Catalyst 8300 uses NIM-4FXO for four FXO analog ports. The same voice NIM group also takes NIM-2FXO, NIM-2FXSP, NIM-4FXSP, NIM-2FXS/4FXOP, NIM-4E/M, NIM-2BRI-NT/TE and NIM-4BRI-NT/TE. Match the C8300 1N1S or 2N2S slot count before the PO.
NIM-4FXO has four FXO analog voice ports. The ports connect by straight-through 2-wire cable to PBX or key systems, PSTN off-premises connections, or analog CAMA trunks for dedicated E-911 service in North America. FXO signaling can be set for loop-start or ground-start operation.
NIM-4FXO uses one NIM slot. Catalyst 8200 and 8200 Secure Router builds have one NIM slot, Catalyst 8300 1N1S models have one NIM slot, and Catalyst 8300 2N2S models have two. ISR 4000 hosts have up to three integrated NIM slots, depending on the model.
NIM-4FXO adds four FXO trunks with an onboard DSP and 128-ms echo-tail echo cancellation. The module also carries caller ID, battery-reversal detection, call detail record information, cable detection and overload protection. The onboard DSP removes the need for a motherboard PVDM for the analog voice module.
NIM-4FXO requires Cisco IOS XE 26.1 in Routing CLI mode on 8200 Secure Routers. Catalyst 8300 starts at Cisco IOS XE 17.3.2, Catalyst 8200 starts at Cisco IOS XE 17.4.1 or 17.5.1 by model, and ISR 4000 uses Cisco IOS XE 3.16, XE SD-WAN 17.2 and vManage 20.1.
NIM-4FXO uses the host OIR process in a supported NIM slot. Surprise OIR is not used, and managed OIR is not used while active calls are present. Check that calls are ONHOOK before removal, then verify the voice ports and issue no shutdown where the host leaves ports shut.
NIM-4FXO has the edge over NIM-2FXO when the buyer needs four FXO handoffs in one NIM slot. NIM-2FXO serves a two-trunk build with the same FXO role. Choose by trunk count, free NIM slot count and host release.
NIM-4FXO is for four FXO trunks toward a PBX, key system or PSTN connection. NIM-4FXSP is for four FXS, FXS-E and DID station-side ports. Choose NIM-4FXO for trunk-side FXO lines and NIM-4FXSP for analog endpoint or DID requirements.
NIM-4FXO carries four FXO ports only. NIM-2FXS/4FXOP combines two FXS, FXS-E and DID ports with four FXO ports. Choose NIM-4FXO when all four lines are FXO trunks, and choose NIM-2FXS/4FXOP when the same NIM slot also needs two FXS ports.
Cisco has not announced an end-of-sale date for NIM-4FXO. The 4000 Integrated Services Routers it serves stopped selling on 20 January 2025; 4221, 4321, 4331, 4351, 4431 and 4451-X service ends 30 November 2028, and 4461 service ends 31 January 2030.
ORM offers NIM-4FXO in new sealed and certified refurbished condition. Certified refurbished units are inspected and bench-tested in a compatible host. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year. Returns are 30 days on every condition · terms apply.