Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$2,955.00
$128.1095.7% off
Quantity:
NIM-2GE-CU-SFP
Cisco NIM-2GE-CU-SFP 2-Port 1G RJ-45 or SFP Network Interfac...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-2GE-CU-SFP is the Cisco 2-Port Gigabit Ethernet WAN Network Interface Module with two routed 1G dual-mode RJ-45 or SFP ports for ISR 4000 routers. Its edge over NIM-1GE-CU-SFP is a second routed Gigabit Ethernet port and 256-bit MACsec. This Cisco ISR 4000 Network Interface Module fits ISR 4461, ISR 4451, ISR 4431, ISR 4351, ISR 4331 and ISR 4321, and it needs a NIM slot or an SM-X slot with SM-X-NIM-ADPTR. The ports terminate Layer 2 trunks from external switches and pass traffic to the router for Layer 3 forwarding.
NIM-2GE-CU-SFP price for new stock is $330.75, a 88.8% saving from the Cisco list price of $2,955.00. NIM-2GE-CU-SFP refurb price is $128.10. NIM-2GE-CU-SFP is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-2GE-CU-SFP for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
1 Gbps per port runs through RJ-45 copper or a Cisco SFP per port, and the far end must match the selected media. 256-bit MACsec requires Cisco IOS XE 3.16 or later, while base hardware recognition starts at Cisco IOS XE 3.15 on the compatible ISR models. Three NIM slots are available in ISR 4461, ISR 4451, ISR 4431 and ISR 4351; two NIM slots are available in ISR 4331 and ISR 4321. NIM-2GE-CU-SFP has hard OIR, auto-switchover and auto-failover. Aggregate packet and byte counters report per port, not per VLAN. The module measures 32 mm x 89 mm x 184 mm and weighs 0.252 kg.
Order NIM-2GE-CU-SFP as new sealed or certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate inspected, seats and locks in a compatible host, recognized by the host, and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the ISR model, free NIM slot or SM-X-NIM-ADPTR carrier, Cisco IOS XE release and SFP count. Regional stock/RMA covers UK, EU, US and MEA with RMA with advance replacement; PO accepted and Net-30 for government. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x 1G RJ-45 or SFP |
Fits | ISR 4461 to ISR 4321 |
Module Features | 2 routed GE ports; 256-bit MACsec |
Slot | Single-wide NIM slot |
Lifecycle Status | Cisco stopped sales 20 January 2025 |
Replacement PID | C-NIM-2T |
In a nationwide retail environment, the Cisco 4000 Series Integrated Services Router fitted with the NIM-2GE-CU-SFP 2-Port Gigabit Ethernet WAN Module delivers dual SFP uplinks to aggregate gigabit bandwidth across 100+ stores. Centralized Cisco SD-WAN orchestration streamlines provisioning and future-proofs fiber upgrades with hot-swappable SFP cages. Benefit: scalable branch connectivity, lower CapEx via reusable optics, and consistent point-of-sale performance.
A global financial firm deploys redundant Cisco 4000 Series routers equipped with NIM-2GE-CU-SFP modules to establish two independent gigabit links to primary and backup carriers. Automated link health monitoring and sub-millisecond failover ensure uninterrupted data feeds during high-frequency trading. Outcome: 99.999% network availability, strict SLA adherence, and zero-impact transaction continuity.
A hospital network integrates Cisco 4000 Series Integrated Services Routers and NIM-2GE-CU-SFP 2-Port Gigabit Ethernet WAN Modules to segregate telemedicine traffic over dedicated optical paths. Combined with Cisco SD-WAN encryption and QoS policies, this design guarantees HIPAA-compliant high-definition video consultations. Benefit: optimized patient-doctor interaction, assured bandwidth for critical sessions, and robust data security.
A branch router with two routed Gigabit Ethernet WAN links needs the same faceplate and port count back in service. The buyer matches the ISR 4461 to ISR 4321 host, the NIM slot, the selected copper or SFP media, and the Cisco IOS XE release before the PO.
A site needs two Layer 3 Ethernet handoffs without adding a switch module. The design uses one dual-mode port for copper and one for fiber, or two of the same media. The buyer counts one Cisco SFP for each fiber port and verifies the far-end speed.
A fleet still running ISR 4000 routers needs spares after the 20 January 2025 sales stop. The buyer maps each spare to ISR 4461, ISR 4451, ISR 4431, ISR 4351, ISR 4331 or ISR 4321 and keeps the replacement path separate from existing-slot sparing.
ISR 4221 host
The ISR 4221 does not take NIM-2GE-CU-SFP. Use NIM-1GE-CU-SFP only when one routed Gigabit Ethernet port and dual-mode media meet the requirement.
Six routed Gigabit ports
NIM-2GE-CU-SFP provides two routed Gigabit Ethernet ports. Use SM-X-6X1G when the ISR has an SM-X slot and the design needs six GE ports.
One 10G routed port
NIM-2GE-CU-SFP tops out at 1 Gbps per port. Use SM-X-4X1G-1X10G when the ISR has an SM-X slot and one 10G SFP+ port is required.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | Network Interface Module | Network Interface Module |
| Data Rate | 1G | T1/E1 | 8 Mbps |
| Form Factor | Single-Wide | Plug-in Module | Single-Wide |
| Operating Temperature | 0°C to 40°C | 0°C to 50°C | 0°C to 40°C |
| Height | 32 mm | 31.8 mm | 31.8 mm |
| Width | 89 mm | 88.9 mm | 88.9 mm |
| Depth | 184 mm | 183.9 mm | 183.9 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 13 April 2025
Dual port WAN module improved redundancy.
Reviewed on the 14 September 2022
Stable performance on both links.
Reviewed on the 29 July 2023
Flexible WAN connectivity.
Reviewed on the 10 December 2020
Easy to deploy.
Reviewed on the 19 December 2018
Satisfied with reliability.
NIM-2GE-CU-SFP is the Cisco 2-Port Gigabit Ethernet WAN Network Interface Module, the 2-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module for ISR 4000 routers. NIM marks a Network Interface Module, 2GE marks two Gigabit Ethernet ports, and CU-SFP marks copper or SFP media.
NIM-2GE-CU-SFP fits ISR 4461, ISR 4451, ISR 4431, ISR 4351, ISR 4331 and ISR 4321 routers. It needs one NIM slot, or an SM-X slot with SM-X-NIM-ADPTR. The ISR 4221 does not take this two-port routed Gigabit Ethernet NIM.
An ISR 4000 uses NIM-2GE-CU-SFP for two routed Gigabit Ethernet dual-mode ports. NIM-1GE-CU-SFP is the one-port routed Gigabit Ethernet NIM in the same Ethernet routed-port group. The selected ISR model and free NIM slot set the quantity.
NIM-2GE-CU-SFP provides 2 x 1G Ethernet ports with RJ-45 copper or SFP media per port. The ports work as routed Layer 3 ports. The far end must match the selected media, and Layer 2 switching between module ports is not a function of this NIM.
NIM-2GE-CU-SFP uses Cisco 1G SFP choices from the ISR 4000 SFP set, with common choices such as GLC-SX-MMD, GLC-SX-MM, GLC-LH-SMD, GLC-LH-SM, GLC-EX-SMD, GLC-ZX-SMD and GLC-ZX-SM. Order one SFP per fiber port; optics are not included.
NIM-2GE-CU-SFP uses one NIM slot. ISR 4461, ISR 4451, ISR 4431 and ISR 4351 routers have 3 NIM slots; ISR 4331 and ISR 4321 routers have 2 NIM slots. Hard OIR is available, and empty openings need a blank faceplate for airflow.
NIM-2GE-CU-SFP adds two routed Gigabit Ethernet ports and 256-bit MACsec on the two-port NIM. Auto-switchover and auto-failover are also available. Packet and byte counters report at an aggregate level per port, so the router does not create per-VLAN counters on the module.
NIM-2GE-CU-SFP needs Cisco IOS XE 3.15 as the base ISR 4000 release. XE SD-WAN starts at 16.11 on ISR 4461, 16.10 on ISR 4451, and 16.9 on ISR 4431, ISR 4351, ISR 4331 and ISR 4321. MACsec requires Cisco IOS XE 3.16.
NIM-2GE-CU-SFP= is the spare-order form of NIM-2GE-CU-SFP. The spare form is used when the buyer needs the module as a separate field-replaceable item rather than inside a router configuration. Match the same ISR host, NIM slot and Cisco IOS XE release.
The replacement PID for NIM-2GE-CU-SFP is C-NIM-2T. The replacement description is Cisco Catalyst NIM Module 2-port 1GE SFP with MACSec, so the move changes the host generation and removes the RJ-45 dual-mode choice. Confirm the target router before changing the order.
NIM-2GE-CU-SFP gives two routed Gigabit Ethernet dual-mode ports and 256-bit MACsec. NIM-1GE-CU-SFP gives one routed Gigabit Ethernet dual-mode port and no MACsec in the same comparison set. Use the two-port NIM when both WAN handoffs need the same ISR slot.
NIM-2GE-CU-SFP fits a NIM slot and gives two routed dual-mode Gigabit Ethernet ports. SM-X-6X1G fits an SM-X slot and gives six Gigabit Ethernet SFP ports on platforms with an SM-X slot. Choose by free slot type first, then by port count.
Cisco stopped selling NIM-2GE-CU-SFP on 20 January 2025. Last ship date was 20 April 2025, software maintenance ended on 20 January 2026, and Cisco service ends on 31 January 2030. The module serves ISR 4461 through ISR 4321 routers.
ORM offers NIM-2GE-CU-SFP as new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host. Cisco service ends on 31 January 2030. ORM warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30-day returns; terms apply.