Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,589.67
$62.3596.1% off
Quantity:
NIM-1GE-CU-SFP
Cisco NIM-1GE-CU-SFP 1-Port 1G RJ-45/SFP Network Interface M...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-1GE-CU-SFP is a Cisco 1-Port Gigabit Ethernet WAN Network Interface Module with one dual-mode GE RJ-45 or SFP port for Cisco 4000 Series ISRs. It fits every Cisco 4000 Series ISR with a NIM slot; NIM-2GE-CU-SFP is limited to ISR 4321 through ISR 4461. A Cisco ISR 4000 Network Interface Module occupies one external NIM slot, or an SM-X slot when an SM-X-NIM-ADPTR carrier is installed. The routed Layer 3 port terminates Ethernet WAN access, inter-VLAN trunks, or LAN-switch handoffs, and the host router routes the traffic. The one-port GE WAN NIM keeps copper or fiber as an order-time media choice.
NIM-1GE-CU-SFP price for new stock is $341.25, a 78.5% saving from the Cisco list price of $1,589.67. NIM-1GE-CU-SFP refurb price is $62.35. NIM-1GE-CU-SFP is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-1GE-CU-SFP for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
1 Gbps per port is the rated data rate, with 10/100/1000 Mbps on the RJ-45 side and 100 Mbps or 1 Gbps on the SFP side. NIM-1GE-CU-SFP reports aggregate packet and byte statistics per port rather than per VLAN. Auto-switchover and auto-failover require Cisco IOS XE 3.16. Minimum software is Cisco IOS XE 3.15 on ISR 4461, 4451, 4431 and 4351; SD-WAN uses 16.11 on ISR 4461, 16.10 on ISR 4451 and 16.9 on ISR 4431 and ISR 4351. The module measures 32 x 89 x 184 mm, weighs 0.24 kg and operates from 0°C to 40°C.
NIM-1GE-CU-SFP is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, cages, latch and faceplate inspected, optics bay recognition checked and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the ISR 4000 model, free NIM slot or SM-X-NIM-ADPTR carrier, running release and each SFP PID. Regional stock/RMA: UK, EU, US, MEA; RMA with advance replacement; PO accepted; Net-30 for government. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 1 x 10/100/1000M RJ-45 or 100M/1G SFP |
Fits | ISR 4461 / 4451 / 4431 / 4351 |
Module Features | Fits every ISR 4000 NIM-slot model |
Requires | NIM slot or SM-X-NIM-ADPTR carrier |
Lifecycle Status | Cisco stopped sales on 20 January 2025 |
Replacement PID | C-NIM-2T for Catalyst 8000 Series |
In a multi-site enterprise environment, network engineers install the Cisco 1-Port Gigabit Ethernet WAN Network Interface Module (NIM-1GE-CU-SFP) in ISR routers at branch offices to establish a dedicated, low-latency uplink to headquarters. This deployment delivers consistent application performance, simplifies bandwidth scaling up to 1 Gbps, and reduces operational overhead by streamlining configuration and monitoring across all locations.
Telecom operators integrate the Cisco NIM-1GE-CU-SFP module into edge routers to aggregate multiple fiber or copper uplinks, enabling seamless failover and load balancing across 1 Gigabit Ethernet WAN circuits. The result is carrier-grade network resilience with sub-50 ms recovery, improved link utilization, and guaranteed SLA compliance for mission-critical services.
IT teams leverage the Cisco 1-Port Gigabit Ethernet WAN NIM-1GE-CU-SFP in SD-WAN-enabled routers to create a dedicated, encrypted path from remote sites to public and private cloud environments. This setup ensures optimized traffic steering, end-to-end AES-256 encryption, and dynamic bandwidth allocation, driving up to 40% faster SaaS application access and reducing MPLS costs.
A branch router has a failed GE WAN NIM and the chassis still runs ISR 4000. Match the existing NIM slot, keep the port media at RJ-45 or Cisco SFP, and count one NIM per lost routed Ethernet handoff before the PO.
A site needs one more routed Gigabit Ethernet interface without using an SM-X slot. The buyer can add one single-wide NIM in an open NIM bay, then match IOS XE minimums and one Cisco SFP or copper cable for the live handoff.
A router handoff moves between copper and fiber during a circuit change. The dual-mode port lets the buyer keep one module and order the media side needed for that circuit. Count one port, one transceiver when fiber is used and one NIM slot.
Two routed GE ports
NIM-1GE-CU-SFP provides one external port. NIM-2GE-CU-SFP adds two dual-mode GE/SFP routed ports on ISR 4321 through ISR 4461.
10G SFP+ handoff
NIM-1GE-CU-SFP tops out at 1 Gbps. SM-X-4X1G-1X10G provides one 10G SFP+ mode in an ISR 4000 SM-X slot.
Hot swap on ISR 4221
ISR 4221 has no OIR for all I/O modules. Use a maintenance window for NIM-1GE-CU-SFP removal, or move the requirement to an ISR 4321.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | Network Interface Module | Network Interface Module | Network Interface Module | FXS Telephony Module |
| Connector Type | RJ-45 / SFP | RJ-45 | RJ-45 | RJ-45 | FXS |
| Form Factor | Single-Wide | Single-Wide | Single-Wide | Single-Wide | Modular (NIM) |
| Operating Temperature | 0°C to 40°C | 0°C to 40°C | 0°C to 40°C | 0°C to 40°C | 0 to 70°C |
| Height | 32 mm | 21 mm | 21 mm | 21 mm | 1.5 inches |
| Width | 89 mm | 188 mm | 79 mm | 188 mm | 5.0 inches |
| Depth | 184 mm | 122 mm | 122 mm | 122 mm | 7.0 inches |
| Weight | 0.24 kg | 0.149 kg | 0.079 kg | 0.108 kg | 1.2 lbs |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 9 May 2022
Gigabit WAN module delivered stable connectivity.
Reviewed on the 9 January 2019
Easy integration.
Reviewed on the 8 March 2023
Reliable throughput.
Reviewed on the 11 January 2020
Flexible copper and SFP support.
Reviewed on the 10 September 2018
Good expansion option.
NIM-1GE-CU-SFP is the Cisco 1-Port Gigabit Ethernet WAN Network Interface Module. It provides one routed dual-mode GE/SFP port for Cisco 4000 Series ISRs. NIM marks the Network Interface Module form factor, GE marks Gigabit Ethernet and CU-SFP marks the copper RJ-45 or SFP media choice.
NIM-1GE-CU-SFP fits Cisco 4000 Series ISRs with NIM slots: ISR 4461, ISR 4451, ISR 4431, ISR 4351, ISR 4331, ISR 4321, ISR 4221 and ISR 4221X. An SM-X slot needs SM-X-NIM-ADPTR before the NIM can be installed there.
An ISR 4000 uses NIM-1GE-CU-SFP for one routed GE dual-mode RJ-45/SFP port. The same Ethernet routed-port set also has NIM-2GE-CU-SFP for two dual-mode GE/SFP ports on ISR 4321 through ISR 4461. Match the NIM slot count on the chassis.
NIM-1GE-CU-SFP has one external dual-mode routed Ethernet port. The RJ-45 side runs 10 Mbps, 100 Mbps and 1 Gbps. The SFP side uses 100 Mbps or 1 Gbps SFPs. The far end must match the selected media and speed.
NIM-1GE-CU-SFP takes Cisco SFPs for 100M and 1G operation. 1G choices include GLC-EX-SMD, GLC-LH-SM, GLC-LH-SMD, GLC-SX-MM, GLC-SX-MMD, GLC-ZX-SM, GLC-ZX-SMD and GLC-TE. 100M choices include GLC-FE-100FX, GLC-FE-100LX, GLC-FE-100ZX and GLC-FE-100EX.
NIM-1GE-CU-SFP uses one NIM slot. ISR 4461, ISR 4451, ISR 4431 and ISR 4351 have 3 NIM slots. ISR 4331, ISR 4321, ISR 4221 and ISR 4221X have 2 NIM slots. ISR 4221 module changes require a power-down maintenance window.
NIM-1GE-CU-SFP adds a routed Layer 3 Gigabit Ethernet WAN port with copper or SFP media. Its edge is fit across every Cisco 4000 Series ISR NIM-slot model. Auto-switchover and auto-failover require Cisco IOS XE 3.16, and packet and byte statistics report per port.
NIM-1GE-CU-SFP starts at Cisco IOS XE 3.15 on ISR 4461, ISR 4451, ISR 4431 and ISR 4351. XE SD-WAN minimums are 16.11 on ISR 4461, 16.10 on ISR 4451 and 16.9 on ISR 4431 and ISR 4351. vManage minimums are 19.1, 18.4 and 18.3 respectively.
C-NIM-2T is the replacement for NIM-1GE-CU-SFP. The replacement is a Cisco Catalyst NIM Module with two 1GE SFP ports and MACSec. C-NIM-2T is for Catalyst 8000 Series platforms, and it is not compatible with ISR 4000 chassis.
NIM-1GE-CU-SFP fits every Cisco 4000 Series ISR with a NIM slot, while NIM-2GE-CU-SFP fits ISR 4321 through ISR 4461. NIM-1GE-CU-SFP has one dual-mode routed GE port. NIM-2GE-CU-SFP has two dual-mode routed GE ports and 256-bit MACsec.
NIM-1GE-CU-SFP is the ISR 4000 one-port dual-mode RJ-45/SFP routed GE NIM. C-NIM-2T is the Catalyst 8000 Series replacement with two 1GE SFP ports and MACSec. Keep NIM-1GE-CU-SFP for ISR 4000 sparing, and use C-NIM-2T only with the new host family.
Cisco stopped selling NIM-1GE-CU-SFP on 20 January 2025. Cisco service ends on 31 January 2030. The module serves Cisco 4000 Series ISRs with NIM slots, and C-NIM-2T is the named replacement for Catalyst 8000 Series platforms, not ISR 4000 chassis.
ORM offers NIM-1GE-CU-SFP new sealed and certified refurbished. Cisco service for NIM-1GE-CU-SFP ends 31 January 2030, and the Cisco ISR 4000 Series warranty term is 90-day limited liability. ORM warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30-day returns on every condition; terms apply.