Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$886.35
$173.2580.5% off
Quantity:
NIM-2FXSP
Cisco NIM-2FXSP 2-Port FXS Network Interface Module for Cata...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-2FXSP is a Cisco 2-Port Network Interface Module - FXS, FXS-E and DID with two analog FXS ports for Catalyst 8300 and ISR 4000 hosts. P-version hardware is the edge over NIM-2FXS; the P suffix marks a hardware-component change with no functionality change. Cisco Catalyst 8300 network interface module buyers use it in the host NIM slot. The module also fits Cisco 4400 and 4300 Series ISRs and the VG450 NIM slots 0/1, 0/2 and 0/3. The ports connect straight-through 2-wire FXS cabling to analog phones, fax machines and key systems, or use DID mode for incoming PSTN calls.
NIM-2FXSP price for new stock is $339.15, a 61.7% saving from the Cisco list price of $886.35. NIM-2FXSP refurb price is $173.25. NIM-2FXSP is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-2FXSP for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
2 analog FXS, FXS-E and DID ports set the port count for the Cisco two-port FXS NIM. Onboard DSP provides TDM analog voice services, so a motherboard PVDM is not required for the voice features. 128-ms echo-tail cancellation, caller line ID, G.711, G.729a, G.726, fax pass-through, fax relay, DTMF detection, voice activity detection and RTP are credited to the module family. NIM-2FXSP requires Cisco IOS XE 16.5 or later. Voice applications require the Unified Communications technology package on ISR 4000. Cisco 4000 Series ISR NIM slot counts are three on 4461, 4451, 4431 and 4351, and two on 4331 and 4321. NIMs use OIR commands one module at a time.
NIM-2FXSP is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate inspected, recognized by the host and seats and locks in a compatible host. Before the PO, confirm the Catalyst 8300 or ISR 4000 NIM slot, Cisco IOS XE 16.5 or later and the straight-through 2-wire cable. UK, EU, US and MEA stock/RMA, RMA with advance replacement, PO accepted and Net-30 for government apply. New carries up to 3-year extended warranty, certified refurbished carries up to 1 year, and returns are 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x FXS, FXS-E and DID |
Fits | Catalyst 8300 / ISR 4000 / VG450 |
Module Features | P-version hardware / onboard DSP / 128-ms echo cancellation |
Requires | Cisco IOS XE 16.5 or later |
Slot | NIM slot; VG450 slots 0/1, 0/2, 0/3 |
Replaces | NIM-2FXS |
In a multi-site enterprise, deploy the NIM-2FXSP-Voice Module (2-port FXS) on Cisco ISR routers at remote branches to connect legacy analog telephones and fax machines directly into your corporate SIP trunk. This use case centralizes voice management, cuts local PSTN toll charges by up to 30%, and accelerates deployment by leveraging existing analog devices without on-site gateways.
Large hotels and resorts install the NIM-2FXSP-Voice Module (2-port FXS) in Cisco routers to extend in-room analog telephones and wake-up call systems over the IP network. The module simplifies provisioning of guest services, reduces maintenance costs by 20%, and delivers consistent call quality and centralized billing—enhancing guest satisfaction and operational efficiency.
Medical clinics and small hospitals integrate emergency analog panic buttons, nurse-call stations, and fax machines using the NIM-2FXSP-Voice Module (2-port FXS) on Cisco ISR platforms. This solution ensures regulatory compliance for analog life-safety circuits, maintains high availability with built-in router redundancy, and consolidates voice and data infrastructure—improving patient safety and reducing equipment footprint.
An enterprise keeps two analog phones, fax devices or key-system ports on an IP voice host. The module adds two FXS, FXS-E or DID ports and keeps the DSP on the NIM. Count one NIM slot, two ports and Cisco IOS XE 16.5 or later before the PO.
A branch uses Cisco 4400 or 4300 Series ISRs with analog voice service still in place. A spare module replaces the same PID through OIR without powering off the router. Count the exact ISR model, the free NIM slot and the Unified Communications technology package before the PO.
A voice gateway build uses VG450 slots 0/1, 0/2 or 0/3 for low-density analog FXS. The module occupies one NIM slot and adds two FXS, FXS-E or DID ports. Count the VG450 slot, the port IDs and the straight-through 2-wire cable before the PO.
Four FXS ports
NIM-2FXSP provides two FXS, FXS-E or DID ports; NIM-4FXSP gives the four-port FXS NIM role on the same host families.
FXS and FXO ports
NIM-2FXSP has FXS, FXS-E and DID ports; NIM-2FXS/4FXOP provides two FXS and four FXO ports in one NIM.
Cisco 2900 or 3900 ISR
NIM-2FXSP does not fit Cisco 2900 and 3900 Series ISRs; VIC3-2FXS/DID is the ISR G2 comparison for the two-port FXS role.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | WAN | Network Interface Module | NIM | Ethernet |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 7 December 2025
FXS ports provided dependable analog connectivity.
Reviewed on the 26 June 2025
Easy installation.
Reviewed on the 3 April 2021
Consistent performance.
Reviewed on the 24 February 2020
Reliable module.
Reviewed on the 20 June 2017
No call drops.
NIM-2FXSP is the Cisco 2-Port Network Interface Module - FXS, FXS-E and DID for analog voice NIM slots. It adds two FXS, FXS-E or DID ports to Catalyst 8300, ISR 4000 and VG450 hosts. NIM means Network Interface Module, 2 marks two ports, FXS marks station ports, and P marks P-version hardware.
NIM-2FXSP fits Catalyst 8300, Cisco 4400 and 4300 Series ISRs, and VG450 slots 0/1, 0/2 and 0/3. It does not fit Cisco 2900 or 3900 Series ISRs; VIC3-2FXS/DID matches the two-port FXS role there. ISR 4000 voice applications require the Unified Communications technology package.
A Catalyst 8300 uses NIM-2FXSP for two FXS ports in the analog voice NIM set. The same Catalyst 8300 voice module set includes NIM-4FXSP for four FXS ports and NIM-2FXS/4FXOP for two FXS ports plus four FXO ports. Order by the required analog port mix.
NIM-2FXSP adds two FXS, FXS-E or DID ports. FXS ports connect straight-through 2-wire cabling to analog phones, fax machines and key systems. DID mode provides incoming PSTN calls and does not carry caller ID in DID mode. The module family carries onboard DSP for TDM analog voice services.
NIM-2FXSP occupies one NIM slot. ISR 4461, 4451, 4431 and 4351 models have three NIM slots, while ISR 4331 and 4321 models have two NIM slots. A VG450 takes NIM voice modules in slots 0/1, 0/2 and 0/3. NIMs use OIR commands one module at a time.
NIM-2FXSP adds P-version hardware with no functionality change from NIM-2FXS, plus the analog voice NIM feature set. The module family provides onboard DSP, 128-ms echo-tail cancellation, caller line ID, G.711, G.729a, G.726, fax pass-through, fax relay, DTMF detection, voice activity detection, RTP and RFC 4733 digit relay.
NIM-2FXSP requires Cisco IOS XE 16.5 or later on affected ISR 4000 deployments. Earlier ISR 4000 releases can boot the NIM but fail to show the analog voice ports. ISR 4000 voice applications also require the Unified Communications technology package, which is optional on the host.
NIM-2FXSP= is the Cisco spare ordering form for NIM-2FXSP. The base PID and the equals spare form identify the same two-port FXS, FXS-E and DID network interface module role. Use the equals form only when the order requires Cisco spare-part formatting.
NIM-2FXSP replaced NIM-2FXS as the two-port FXS, FXS-E and DID Network Interface Module. The P-version hardware was introduced after a component change, and the analog voice functionality did not change from the non-P version. Confirm Cisco IOS XE 16.5 or later before replacing an older unit.
NIM-2FXSP gives two FXS, FXS-E or DID ports, while NIM-4FXSP gives four FXS, FXS-E or DID ports. Both belong to the same analog voice NIM set and use the P-version hardware path. Choose NIM-2FXSP for two analog station lines and NIM-4FXSP for four.
NIM-2FXSP gives two FXS, FXS-E or DID ports. NIM-2FXS/4FXOP adds the same two FXS, FXS-E or DID ports plus four FXO ports in one NIM. Choose NIM-2FXSP for station-side analog voice only and NIM-2FXS/4FXOP when the same slot also needs FXO lines.
Cisco has not announced an end-of-sale date for NIM-2FXSP. The module serves Catalyst 8300, Cisco 4400 and 4300 Series ISR, and VG450 hosts in the opened Cisco product material. NIM-2FXSP is also named as the replacement PID for NIM-2FXS.
ORM offers NIM-2FXSP new sealed and certified refurbished. The Cisco ISR 4000 warranty term is 90-day limited liability warranty. New carries up to 3-year extended warranty, and certified refurbished carries up to 1 year. Returns are 30 days on every condition; terms apply. Certified refurbished units are inspected and bench-tested in a compatible host.