Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,772.70
$88.3895% off
Quantity:
NIM-4FXSP
Cisco NIM-4FXSP 4-Port FXS Network Interface Module for Cata...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-4FXSP is the Cisco 4-Port Network Interface Module - FXS, FXS-E and DID, a Cisco NIM Network Interface Module with 4 FXS, FXS-E and DID analog voice ports for Catalyst 8300 edge platforms. Its edge over NIM-2FXSP is two more FXS/DID ports in the same NIM role. It also fits Catalyst 8200 edge platforms, Cisco 4000 Series ISRs, VG420 and VG450 voice gateways. A Cisco Catalyst 8300 network interface module uses a NIM slot, or a C-SM-NIM-ADPTR carrier when the design adds NIMs in an SM slot. The ports connect analog phones, fax machines, key systems or DID service to the host voice configuration.
NIM-4FXSP price for new stock is $570.15, a 67.8% saving from the Cisco list price of $1,772.70. NIM-4FXSP refurb price is $88.38. NIM-4FXSP is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-4FXSP for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
4 FXS/DID ports give the host FXS, FXS-E or DID voice interfaces over straight-through 2-wire cabling. FXS ports connect phones, fax machines and key systems, and DID ports take incoming calls from the PSTN without caller ID in DID mode. NIM-4FXSP carries onboard DSP for TDM analog voice services, so the router does not need a motherboard PVDM for these voice features. Echo cancellation reaches 128 ms, and the feature set includes caller line ID, G.711, G.729a, G.726, fax detection with T.38 relay, modem pass-through, DTMF detection and RTP. Catalyst 8300 models start at Cisco IOS XE 17.3.2 for this part; ISR 4000 P-version hardware needs Cisco IOS XE 16.5 or later.
NIM-4FXSP is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; connectors, latch and faceplate are inspected, the module seats and locks, and the host recognizes it. Before the PO, confirm the host, a free NIM slot or C-SM-NIM-ADPTR carrier, Cisco DNA Advantage on Catalyst 8300 or 8200, and 2-wire analog cabling. UK, EU, US and MEA stock and RMA with advance replacement serve regional projects. PO accepted, Net-30 for government, 30 days on every condition; terms apply. New: up to 3-year extended warranty; certified refurbished: up to 1 year.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x FXS/FXS-E/DID analog voice |
Fits | Catalyst 8300 / Catalyst 8200 / ISR 4000 |
Module Features | 4 ports versus NIM-2FXSP; onboard DSP |
Requires | NIM slot; Cisco DNA Advantage on Catalyst 8300/8200 |
Slot | VG420: 2 NIM slots; VG450: 3 NIM slots |
Minimum Software | Catalyst 8300: Cisco IOS XE 17.3.2 |
A buyer keeping analog phones, fax machines or key systems on an IP voice host uses 4 FXS, FXS-E or DID ports from one NIM slot. Count one port per analog endpoint or DID circuit, then match the host release and voice entitlement before the PO.
A Catalyst 8300 or Catalyst 8200 build uses the NIM bay for this 4-port FXS module. A 2RU Catalyst 8300 has 2 default NIM slots, while a 1RU model has 1. Count C-SM-NIM-ADPTR only when the design needs extra NIM positions.
A VG420 or VG450 sparing pool uses the same FXS/DID NIM across voice gateway slots. VG420 has 2 NIM slots, and VG450 uses slots 0/1, 0/2 and 0/3. Match the site gateway and keep the spare count tied to installed modules.
C8355-G2 secure router
C8355-G2 takes only cellular modules, so NIM-4FXSP does not fit that host. Use C8375-E-G2 when the 8300 Secure Router build needs this analog voice NIM.
Two-port FXS density
NIM-4FXSP gives 4 FXS, FXS-E or DID ports. Use NIM-2FXSP when the same host needs only 2 FXS/DID ports in the NIM role.
FXS and FXO mix
NIM-4FXSP gives FXS, FXS-E or DID ports only. Use NIM-2FXS/4FXOP when the same host needs 2 FXS ports and 4 FXO ports on one NIM.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Form Factor | Plug-in Module | Single-Wide | Modular NIM | Modular (NIM) |
| Module Type | Network Interface Module | Network Interface Module | T1/E1 PRI Module | FXS Telephony Module |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 12 May 2026
NIM-4FXSP provided reliable FXS voice connectivity.
Reviewed on the 18 March 2024
Stable analog voice performance.
Reviewed on the 28 December 2017
Professional ISR voice expansion module.
Reviewed on the 3 September 2025
Clear call quality under load.
Reviewed on the 19 December 2024
Dependable DID support.
Reviewed on the 5 December 2023
Consistent uptime for branch telephony.
NIM-4FXSP is the Cisco 4-Port Network Interface Module - FXS, FXS-E and DID. It gives a NIM host 4 analog FXS, FXS-E or DID ports. NIM means Network Interface Module, FXS means Foreign Exchange Station, and P marks the newer hardware build.
NIM-4FXSP fits Catalyst 8300, Catalyst 8200, C8375-E-G2, Cisco 4000 Series ISR, VG420 and VG450 hosts. C8355-G2 does not take it because that host takes only cellular modules. Catalyst 8300 and 8200 builds need Cisco DNA Advantage for voice modules.
A Catalyst 8300 uses NIM-4FXSP for 4 FXS, FXS-E or DID analog voice ports. The same voice NIM group includes NIM-2FXO, NIM-4FXO, NIM-2FXSP, NIM-2FXS/4FXOP, NIM-4E/M, NIM-2BRI-NT/TE and NIM-4BRI-NT/TE for different voice interfaces.
NIM-4FXSP has 4 FXS, FXS-E or DID analog voice ports. FXS ports connect analog phones, fax machines and key systems. DID ports take incoming PSTN calls and do not carry caller ID in DID mode. NIM FXO and FXS connections use straight-through 2-wire cabling.
NIM-4FXSP uses one NIM slot per module. Catalyst 8300 2RU models have 2 default NIM slots, and 1RU models have 1. C-SM-NIM-ADPTR raises the maximum to 6 NIMs on 2RU Catalyst 8300 and 3 NIMs on 1RU Catalyst 8300.
NIM-4FXSP adds 4 FXS/DID ports, onboard DSP for TDM analog voice services and 128 ms echo cancellation. The voice feature set includes caller line ID, G.711, G.729a, G.726, fax detection with T.38 relay, modem pass-through, DTMF detection, RTP and cable detection.
NIM-4FXSP needs Cisco IOS XE 17.3.2 on Catalyst 8300 and Cisco IOS XE 16.5 or later for ISR 4000 P-version hardware. VG420 needs Cisco IOS XE 17.6.1 or later. 8300 Secure Router analog voice modules start in Cisco IOS XE 26.1 in Routing CLI mode.
Yes, NIM-4FXSP is the P-version 4-port FXS/DID NIM. The P version came from a hardware component change and keeps the same functionality as the non-P version. Catalyst 8300 and Catalyst 8200 take the P-version analog FXS NIMs, and NIM-4FXSP= is the spare form.
NIM-4FXSP gives 4 FXS, FXS-E or DID ports, while NIM-2FXSP gives 2. Choose NIM-4FXSP when one NIM slot needs four analog station or DID interfaces. Choose NIM-2FXSP when the same host needs only two analog FXS/DID ports.
NIM-4FXSP gives 4 FXS, FXS-E or DID ports. NIM-2FXS/4FXOP gives 2 FXS, FXS-E or DID ports and 4 FXO ports. Choose NIM-4FXSP for four station-side analog ports. Choose NIM-2FXS/4FXOP when one NIM slot needs both FXS and FXO interfaces.
NIM-4FXSP is the P-version 4-port FXS/DID NIM, and NIM-4FXS is the non-P 4-port FXS/DID NIM. The P version keeps the same function. Catalyst 8300 and Catalyst 8200 take the P-version analog FXS NIMs, so NIM-4FXSP is the correct 4-port choice for those hosts.
Cisco has not announced an end-of-sale date for NIM-4FXSP. The module serves Catalyst 8300, Catalyst 8200, 8300 Secure Router, Cisco 4000 Series ISR, VG420 and VG450 voice hosts. Match the host lifecycle separately when the order is for installed-base sparing.
ORM offers NIM-4FXSP new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host. New warranty is up to 3-year extended, and certified refurbished warranty is up to 1 year. Returns are 30 days on every condition; terms apply.