Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,415.82
$102.8992.7% off
Quantity:
NIM-ES2-8-P
Cisco NIM-ES2-8-P 8-Port 1G RJ-45 PoE/PoE+ Network Interface...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
NIM-ES2-8-P is a Cisco 8-Port Gigabit Ethernet Switch NIM with PoE Support, an 8-port 10/100/1000 RJ-45 network interface module for Catalyst 8300. PoE/PoE+ on all eight ports is its edge over NIM-ES2-8. Catalyst 8200 and 4000 ISR hosts also take it. A Cisco Catalyst 8300 Network Interface Module fits C8300 2N2S-4T2X, 2N2S-6T, 1N1S-4T2X and 1N1S-6T models. It uses one NIM slot and needs a PoE system power supply for powered ports. The Ethernet switch ports connect IP phones, wireless access points, video devices, routers, switches and other network components.
NIM-ES2-8-P price for new stock is $312.90, a 77.9% saving from the Cisco list price of $1,415.82. NIM-ES2-8-P refurb price is $102.89. NIM-ES2-8-P is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for NIM-ES2-8-P for additional pricing. Browse the full Cisco NIM Network Interface Modules series or explore all Cisco products.
1 Gbps per port is the top data rate, with 10 Mbps, 100 Mbps and 1 Gbps autosensing on RJ-45 copper. The 8-port PoE NIM uses full- or half-duplex modes when the far end matches the setting. A 100-meter cable limit applies to attached devices. NIM-ES2-8-P provides a 1 Gbps MGF connection, 4K MAC table entries, 60 VLANs per 4000 ISR platform and four QoS queues per port. OIR allows removal and insertion without shutting down the router. Cisco IOS XE 17.3.2 is the Catalyst 8300 floor, and Cisco IOS XE 3.15.0 is the 4000 ISR floor.
NIM-ES2-8-P is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host, and copper ports link at every rated speed. Before the PO, confirm the Catalyst 8300, Catalyst 8200 or 4000 ISR model, one free NIM slot, the PoE power supply and RJ-45 copper cabling. Regional stock and RMA with advance replacement cover UK, EU, US and MEA orders; PO accepted and Net-30 for government. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days on every condition, terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 8 x 10/100/1000 RJ-45 |
Fits | Catalyst 8300 / Catalyst 8200 / 4000 ISR models |
Module Features | PoE/PoE+ on all eight ports |
Requires | PoE system power supply for PoE |
Lifecycle Status | Cisco stopped selling 5 March 2025 |
Replacement PID | C-NIM-8M |
Scenario: A large university campus implements 60+ high-definition IP cameras across multiple buildings. The NIM-ES2-8-P-8PORT POE/POE+ Layer 2 GE Switch provides eight 10/100/1000 Mbps PoE+ ports and a fiber uplink, powering each camera with up to 30 W over a single Cat5e cable. Benefit: Simplifies cabling, enables centralized VLAN segmentation and QoS for video streams, and delivers reliable, rack-mountable power and data convergence—ensuring 24×7 campus security with zero downtime.
Scenario: A retail chain rolls out IP-based telephony and Wi-Fi access points in 50 remote storefronts. By deploying the NIM-ES2-8-P-8PORT POE/POE+ Module in each branch router, IT teams deliver PoE+ power and Gigabit switching to IP phones and dual-band access points. Benefit: Accelerates site turn-up with plug-and-play PoE+, reduces hardware footprint, ensures low-latency voice QoS, and centralizes network management—cutting deployment time by 40% and operational costs by 25%.
Scenario: A modern office tower integrates hundreds of PoE-powered smart sensors—lighting controllers, access readers, environmental monitors—and connects them to a core data center over single-mode fiber. The NIM-ES2-8-P-8PORT Module delivers eight 30 W PoE+ ports and a dedicated GE fiber uplink per floor. Benefit: Enables high-density IoT device aggregation, enforces departmental VLANs, supports rapid firmware updates, and lowers OPEX by 30% through power-over-Ethernet consolidation and streamlined network topology.
An installed router has a failed 8-port PoE switch NIM after Cisco sales ended on 5 March 2025. The buyer needs the same PID to preserve the RJ-45 port map, PoE behavior and software floor. Count the occupied NIM slot and the PoE system power supply before the PO.
A branch edge platform needs eight local 10/100/1000 RJ-45 switch ports from one NIM slot. The buyer uses the module in a Catalyst 8300, Catalyst 8200 or 4000 ISR host that takes it. Count one cable per device and keep each copper run within 100 meters.
A mixed sparing pool covers Catalyst 8300, Catalyst 8200 and 4000 ISR routers with Layer 2 Gigabit Ethernet switch NIMs. The buyer standardizes on the 8-port PoE form but must separate ISR 4221 spares. Match Cisco IOS XE 17.3.2, 17.4.1 or 3.15.0 by host.
ISR 4221 PoE switching
ISR 4221 has NA for the 8-port PoE configuration. Use NIM-ES2-8 only when eight non-PoE Gigabit Ethernet switch ports meet the requirement.
2.5G RJ-45 switching
NIM-ES2-8-P tops out at 1 Gbps per port. C-NIM-8M is the 8-port 2.5G RJ-45 Layer 2/3 LAN/WAN switch NIM.
Layer 3 LAN/WAN switching
NIM-ES2-8-P is a Layer 2 switch NIM. C-NIM-8T adds 8-port 1G RJ-45 Layer 2/3 LAN/WAN switching for Catalyst 8300 and 8200 hosts.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Module Type | Network Interface Module | WAN Module | Ethernet | Network Interface Module |
| Data Rate | 1G | T1: 1.544 Mbps, E1: 2.048 Mbps | 1Gbps / 10Gbps | 1G |
| Connector Type | RJ-45 | RJ-48 | SFP+ | RJ-45 / SFP |
| Form Factor | Single-Wide | Modular | PCIe | Single-Wide |
| Operating Temperature | 0°C to 40°C | 0 to 70°C | 0 to 70°C | 0°C to 40°C |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 21 March 2023
PoE support worked perfectly for IP phones.
Reviewed on the 17 August 2026
Consistent power delivery and switching stability.
Reviewed on the 15 April 2019
Solid PoE switch module.
Reviewed on the 1 February 2026
PoE support worked perfectly for IP phones.
Reviewed on the 2 March 2026
Consistent power delivery and switching stability.
Reviewed on the 3 December 2023
Simplified powering edge devices.
Reviewed on the 23 December 2022
No issues since deployment.
Reviewed on the 2 February 2019
Simplified powering edge devices.
Reviewed on the 13 July 2024
No issues since deployment.
Reviewed on the 13 March 2024
Solid PoE switch module.
NIM-ES2-8-P is the Cisco 8-port PoE/PoE+ Layer 2 GE Switch Network Interface Module. It provides eight 10/100/1000 RJ-45 switch ports for Catalyst 8300, Catalyst 8200 and selected 4000 ISR hosts. NIM identifies the network interface module form, ES identifies Ethernet switching and P identifies PoE.
NIM-ES2-8-P fits C8300 2N2S-4T2X, C8300 2N2S-6T, C8300 1N1S-4T2X, C8300 1N1S-6T, C8200 1N-4T, C8200L 1N-4T, ISR 4461, ISR 4451, ISR 4431, ISR 4351, ISR 4331 and ISR 4321. ISR 4221 does not fit the 8-port PoE form.
A Catalyst 8300 uses NIM-ES2-8-P for eight 1G RJ-45 Layer 2 switch ports with PoE. The same Ethernet Switch group also contains NIM-ES2-4, NIM-ES2-8, C-NIM-8T, C-NIM-8M and C-NIM-4X. Match the C8300 model and Cisco IOS XE 17.3.2 before ordering.
NIM-ES2-8-P has eight external 10/100/1000 RJ-45 Ethernet switch ports. Each port uses autosensing and autonegotiation by default and can run full duplex or half duplex when the attached device matches the setting. A copper link must stay within 100 meters between the port and the attached device.
NIM-ES2-8-P uses one single-wide NIM slot. ISR 4321 and ISR 4331 take two 8-port PoE NIMs; ISR 4351, ISR 4431 and ISR 4451 take three. OIR allows insertion and removal without powering down the router, and a blank filter plate fills an empty subslot.
NIM-ES2-8-P gives the host PoE/PoE+ on all eight RJ-45 ports, which is the edge over NIM-ES2-8. The module provides 30W per port, four QoS queues per port, SDWRR, intra-chassis cascading, per-port power monitoring and policing, MGF integration and 4K MAC table entries.
NIM-ES2-8-P needs Cisco IOS XE 17.3.2 on Catalyst 8300. Catalyst 8200 1N-4T needs Cisco IOS XE 17.4.1, and C8200L 1N-4T needs Cisco IOS XE 17.5.1. Cisco 4000 Series ISR hosts need Cisco IOS XE 3.15.0 with the IP Base License of the Universal Image.
NIM-ES2-8-P is the base product PID, and NIM-ES2-8-P= is the spare PID. The equals sign does not change the 8-port PoE/PoE+ Layer 2 GE Switch Network Interface Module hardware. Order the same form your asset records, contract line or sparing plan uses.
C-NIM-8M is the replacement for NIM-ES2-8-P. It is the Cisco NIM Switch Module 8-port 2.5mGig RJ45, while NIM-ES2-8-P is the 8-port PoE/PoE+ Layer 2 GE switch NIM. Confirm the host, Cisco IOS XE floor and cabling before the PO.
PoE/PoE+ on all eight ports is the difference between NIM-ES2-8-P and NIM-ES2-8. Both use eight 10/100/1000 RJ-45 Layer 2 Gigabit Ethernet switch ports. Choose NIM-ES2-8-P for powered endpoints and NIM-ES2-8 for the same port count without PoE.
C-NIM-8M raises the port speed to 2.5G RJ-45 and is the named replacement for NIM-ES2-8-P. NIM-ES2-8-P provides eight 1G RJ-45 Layer 2 switch ports with PoE/PoE+. Choose C-NIM-8M for a newer 2.5G LAN/WAN switch NIM after host and release checks.
Cisco stopped selling NIM-ES2-8-P on 5 March 2025, and last date of support is 31 March 2030. Software maintenance ended on 5 March 2026. Catalyst 8300, Catalyst 8200 and 4000 ISR hosts take the module where their Cisco IOS XE floors are met.
ORM supplies NIM-ES2-8-P new sealed and certified refurbished. Cisco service ends 31 March 2030. Certified refurbished units are inspected and bench-tested in a compatible host and every port links at rated speed. Warranty is new — up to 3-year extended and certified refurbished — up to 1 year; returns are 30 days.