Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,282.92
$641.4650% off
Quantity:
SG350-10MP-K9-EU
Cisco SG350-10MP-K9-EU 350 8-Port Gigabit PoE+ Desktop Switc...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
SG350-10MP-K9-EU delivers fanless desktop switching with eight Gigabit PoE+ access ports and two fixed Gigabit copper/SFP combo interfaces. This managed Layer 2+ model belongs to the Cisco 350 Series and connects small-business IP phones, wireless access points, IP surveillance endpoints, and ordinary data clients. Each combo interface uses either its copper connector or its fiber slot, with one medium active at a time. The discontinued SG350-10P-K9-EU carries a smaller power allocation for the same access-port count, while the MP configuration accommodates greater shared endpoint demand. An external AC adapter supplies local power, and the copper uplinks can also power the unit from an upstream PoE switch.
SG350-10MP-K9-EU price for new stock is is available on request. Get immediate quote. SG350-10MP-K9-EU refurb price is $641.46.
Request bulk order quote for SG350-10MP-K9-EU for additional pricing. Browse the full Cisco 350 Series Managed Switches series or explore all Cisco products.
20 Gbps switching capacity supports nonblocking traffic across the fixed interfaces, and 14.88 Mpps forwarding handles 64-byte packets. 124W of shared PoE capacity establishes the allocation limit for attached powered endpoints. Static IPv4 routing supports 990 routes and 128 IP interfaces; PBR selects next hops using IPv4 or IPv6 access controls. SG350-10MP-K9-EU includes 512 MB DRAM, 256 MB flash, and a 1.5 MB packet buffer shared across ports. The Cisco Small Business managed switch maintains 16000 MAC addresses and supports 4094 simultaneous VLANs for separate broadcast domains. STP/RSTP/MSTP handle bridging loops, while LACP groups connections for link aggregation. Browser management offers simple and advanced modes, configuration wizards, monitoring, and system maintenance. Remote administration also supports SSH and SNMP. Dynamic routing is not part of this model's routing capabilities.
Order SG350-10MP-K9-EU as new sealed or certified refurbished, specifying the regional power connection and required optics on the PO. Certified refurbished units are inspected and bench-tested for power-on and POST, every port linking at rated speed, clean boot, optics recognition, PoE output under load on every powered port, PoE-powered startup, and rated adapter output; firmware is verified and configurations are wiped to factory default. ORM warranty is up to 3-year extended for new units or up to 1 year for certified refurbished units, with 30-day returns on every condition, terms apply; Cisco's limited lifetime hardware warranty and service end October 31, 2026. POs are accepted, government Net-30 is available, and volume orders can specify RMA with advance replacement across UK, EU, US, and MEA.
| Key Specs | Key Spec Values |
|---|---|
Port Configuration | 8 x 1G PoE+ / 2 x 1G combo uplinks. |
PoE Budget | 124W shared endpoint power. |
Powered by PoE | Yes / Copper combo uplinks. |
Cooling | Fanless. |
Lifecycle Status | End-of-sale October 30, 2021 / Support ends October 31, 2026. |
Replacement PID | C1300-8FP-2G / Intermediate CBS350-8FP-E-2G-EU discontinued. |
For a branch powered from another switch, downstream power depends on the incoming uplink feed. Two PoE+ uplinks leave 22W for endpoints; two 60W PoE uplinks leave 50W. Specify the upstream switch power capability and the connected endpoint loads before placing the purchase order.
When multiple sites need the same approved configuration, text-editable configuration files and secure SCP autoconfiguration support a shared baseline. CLI privilege levels 1, 7, and 15 separate operator access within that rollout. Specify the configuration template, administrative credentials, and privilege assignments for each ordered unit before the purchase order.
For a staging bench that must capture endpoint traffic before rollout, port mirroring can send traffic from eight source ports to one destination. Only one mirroring session is available. Specify the capture connection and the ports to observe, then include the required bench configuration in the purchase order.
10G fiber uplinks to distribution
The 1G combo interfaces cannot provide 10G fiber links. C1300-8MGP-2X provides two 10G SFP+ uplinks, with a different access mix: four 2.5GE ports and four GE ports.
30W on every powered port
Eight ports drawing 30W require 240W, exceeding the shared 124W allocation. SG350-10MP-K9-EU cannot supply that concurrent load; size the connected endpoint demand against its shared budget.
Cisco support beyond October 2026
Cisco support ends October 31, 2026. C1300-8FP-2G is the current migration endpoint; the intermediate CBS350-8FP-E-2G-EU is discontinued and is not the final successor for a refresh.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Depth | 170 mm | 203 mm | 170 mm | 203 mm | 170 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet |
| Flash Memory | 256 MB | 256 MB | 256 MB | 256 MB | 256 MB |
| Form Factor | Desktop | Rack-Mount 1U | Desktop | Rack-Mount 1U | Desktop |
| Height | 44 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | SG350-10MP-K9-EU | SG350-20 | SG350-10MP | SG350-28SFP | SG350-10P |
| Memory | 512 MB | 512 MB | 512 MB | 512 MB | 512 MB |
| Power Consumption | 152.8W | 15.2W | 152.8W | 34.3W | 84.7W |
| SFP Ports | 2 x 1GbE (Combo, shared with RJ-45) | 2 x 1GbE / 2 x 1GbE (Combo, shared with RJ-45) | 2 x 1GbE (Combo, shared with RJ-45) | 26 x 1GbE / 2 x 1GbE (Combo, shared with RJ-45) | 2 x 1GbE (Combo, shared with RJ-45) |
| Switching Capacity | 20 Gbps | 40 Gbps | 20 Gbps | 56 Gbps | 20 Gbps |
| Weight | 1.19 kg. | 2.12 kg. | 1.19 kg | 2.7 kg | 1.19 kg |
| Width | 280 mm | 440 mm | 280 mm | 440 mm | 280 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
SG350-10MP-K9-EU identifies a 350 Series Gigabit managed switch: 10 covers eight access ports plus two combo interfaces, MP selects the 124W PoE+ configuration, and EU is the regional ordering suffix. Each combo interface accepts copper or fiber. Keep the complete K9-containing identifier intact on the purchase order.
The Cisco 350 Series is managed through HTTP/HTTPS web UI, full or menu-based CLI over console, SSH or Telnet, SNMP, Smart Network Application, Cisco FindIT Network Manager, and Cisco Active Advisor. An embedded FindIT Network Probe supports centralized management without a separate probe appliance. The browser interface includes configuration, monitoring, maintenance, and wizards.
SG350-10MP-K9-EU provides a shared 124W PoE budget across eight powered access ports, with 30W available per port until the total allocation is reached. Eight simultaneous 30W loads would require 240W, so the switch cannot deliver the individual port maximum everywhere at once. Check aggregate endpoint requirements before ordering.
Yes, SG350-10MP-K9-EU can receive power through its copper uplinks, with AC power taking priority when connected and functioning. Two PoE+ uplinks provide 22W for downstream endpoints, while two 60W PoE uplinks provide 50W. Upstream-powered operation therefore requires a different endpoint allocation from operation using the external AC adapter.
SG350-10MP-K9-EU has two fixed 1G copper/SFP combo interfaces, each allowing one active medium rather than simultaneous copper and fiber connections. Supported fiber options include MGBSX1 for multimode links within 500 m and MGBLX1 for single-mode links within 10 km. Specify compatible optics and the intended fiber medium with the order.
The Cisco 350 Series provides static IPv4 routing with 990 routes and 128 IP interfaces, plus IPv6 routing and PBR. Interfaces can be assigned to physical ports, link aggregation groups, VLANs, or loopbacks. These capabilities support local inter-VLAN forwarding, but the switch does not provide dynamic routing protocol operation.
Yes, SG350-10MP-K9-EU reached end-of-sale on October 30, 2021, and its last date of Cisco support is October 31, 2026. Software maintenance ended October 30, 2022. The initial replacement, CBS350-8FP-E-2G-EU, is also discontinued; C1300-8FP-2G is the current endpoint of the replacement chain for buyers planning a refresh.
SG350-10MP-K9-EU replaces SG300-10MPP-K9-EU, which reached end-of-sale on May 10, 2018, and lost Cisco support on May 31, 2023. The predecessor was a 10-port Gigabit Max PoE+ managed switch. SG350-10MP-K9-EU is itself discontinued, so a new refresh should follow the replacement chain through to C1300-8FP-2G.
SG350-10MP-K9-EU provides 124W of shared PoE power, whereas SG350-10P-K9-EU provides 62W. Both models are discontinued and use eight powered access ports. For existing 350 Series replacement stock, the MP model accommodates a larger endpoint allocation, while the 10P model matches installations whose aggregate powered-device requirements fit within 62W.
SG350-10MP-K9-EU uses an external AC adapter, whereas SG355-10P-K9-EU uses an internal universal AC power supply. Both models are discontinued, making this a comparison for established installations rather than a current-generation refresh. The former matches an external-adapter arrangement; the latter matches an installation requiring power conversion inside the switch chassis.
SG350-10MP-K9-EU is discontinued, with Cisco support ending October 31, 2026, whereas C1300-8FP-2G is the current migration endpoint after the discontinued CBS350-8FP-E-2G-EU. This comparison concerns lifecycle rather than an assumed performance increase. SG350-10MP-K9-EU suits established replacement stock, while C1300-8FP-2G is the model to specify for a current-family refresh.
ORM offers SG350-10MP-K9-EU new sealed with up to a 3-year extended warranty or certified refurbished with up to 1 year; Cisco's platform warranty is limited lifetime, subject to eligibility, with hardware warranty and service ending October 31, 2026. Returns are 30 days on every condition, and terms apply.
SG350-10MP-K9-EU is a fanless desktop switch measuring 280 mm wide, 44 mm high, and 170 mm deep, with a weight of 1.19 kg. Its narrow chassis is not a full-width 19-inch rack enclosure. Allow space for the external adapter and cable connections when specifying the installation arrangement.