Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$1,312.50
$656.2550% off
Quantity:
SG500X-24MPP
Cisco SG500X-24MPP 500X 24-Port Gigabit PoE+ Switch, 4x10G S...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
SG500X-24MPP combines 24 Gigabit Ethernet PoE+ access ports with four fixed 10G SFP+ interfaces in a managed, rack-mount 1U switch. The Cisco 500X supports Layer 2+ operation, combining Ethernet switching with static routing and RIP v2 for small-business networks connecting computers, IP phones, wireless access points, and other powered endpoints. Its uplinks are built into the chassis rather than supplied by an optional network module. Compared with the retired SG500X-24P, the higher-power configuration increases the available PoE budget from 375W to 740W. This 24-port Gigabit PoE+ switch therefore distinguishes itself through endpoint power capacity rather than faster copper access connections; those access interfaces remain Gigabit Ethernet.
SG500X-24MPP price for new stock is is available on request. Get immediate quote. SG500X-24MPP refurb price is $656.25.
Request bulk order quote for SG500X-24MPP for additional pricing. Browse the full Cisco 500 Series Stackable Managed Switches series or explore all Cisco products.
128 Gbps switching capacity and 95.24 Mpps forwarding performance support wire-speed packet handling, with the forwarding figure specified for 64-byte packets. 740W of available PoE power supplies connected endpoints, with a maximum allocation of 30W per powered port. Static IPv4 routing, static IPv6 routing, RIP v2, and VRRP provide routing and gateway redundancy functions. SG500X-24MPP carries 256 MB of DRAM and 32 MB of flash memory for its embedded software and configuration. A 16384-entry MAC address table supports address learning, while 2048 static IPv4 routes accommodate local routing configurations. Browser access, console access, SSH, Telnet, and SNMP provide administrative options. Three fans cool the chassis, which supports operation from 0°C to 50°C. Maximum consumption reaches 851.08W at 110V with PoE included, so electrical provisioning must account for endpoint power as well as switch operation.
SG500X-24MPP is offered new sealed or certified refurbished; specify the required condition, quantity, and accessory PIDs on the purchase order. Certified refurbished units are inspected and bench-tested for power-on and POST, clean boot, rated-speed links on every port, PoE output under load on every powered port, optics bay recognition, PSU status, and fan status; firmware is verified and configurations are wiped to factory default. New units include up to a 3-year extended warranty, certified refurbished units include up to a 1-year warranty, and every condition has 30-day returns, with terms applying; Cisco support for this retired family has ended. PO purchasing, Net-30 for government, RMA with advance replacement, and regional stock/RMA coverage across the UK, EU, US, and MEA support enterprise and volume orders.
| Key Specs | Key Spec Values |
|---|---|
Port Configuration | 24 x 1G PoE+ / 4 x 10G SFP+ |
PoE Budget | 740W |
Stacking | Hardware stacking / eight members |
Max Power Draw | 851.08W |
Cooling | 3 fans |
In a multi-tenant branch office scenario, IT teams deploy up to 24 IP phones and 12 PoE+ access points using the Cisco SG500X-24MPP 24-port Gig Plus 4 10-Gig Max PoE+ Switch. With 30 W per port and four 10 GbE uplinks, this setup centralizes power delivery, reduces rack footprint, and streamlines management—delivering predictable power budgeting and improved network reliability.
For edge switching in a modern data center, the Cisco SG500X-24MPP aggregates 24 Gigabit server links and provides four SFP+ 10 GbE uplinks to the core. Its Layer 3 static routing, high throughput, and low-latency forwarding enable seamless scalability, enhanced redundancy, and simplified administration—ensuring optimal performance under heavy east-west traffic.
In a campus-wide security and IoT deployment, facilities teams connect up to 36 PoE+ cameras and environmental sensors to the Cisco SG500X-24MPP. Centralized PoE budget tracking, remote power cycling, and VLAN segmentation simplify cabling and enhance security, ensuring continuous 24/7 operation with minimal downtime and streamlined maintenance.
When staging an upgrade from software earlier than 1.3.5.x, the 500 family requires an intermediate image and boot-file upgrade before later releases. The intermediate combination is software 1.3.7.x with boot file 1.3.7.01. Establish the starting versions, configuration backup, and upgrade sequence before scheduling the hardware order.
When several sites need consistent port policies, editable text configuration files and SCP-based autoconfiguration provide a common staging method. Keep site-specific addressing and administrative credentials separate from the shared configuration rather than copying an installed configuration unchanged. Specify the configuration baseline and transfer method before approving the purchase order.
Endpoints requiring more than 30W
The powered access ports support a maximum of 30W each. A larger aggregate power budget does not increase the maximum power available from an individual port.
Fanless operation near occupied workspaces
The chassis uses three fans rather than passive cooling. Installations that explicitly require fanless hardware cannot satisfy that requirement with this switch.
Native multigigabit copper endpoint connections
The copper access interfaces operate at Gigabit Ethernet speeds. Faster optical uplinks do not change the negotiated speed available to directly attached copper endpoints.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| SG500X-24MPP |  SF500-48 |  SF500-24P |  SG500X-24P |  SG500X-48MP | |
|---|---|---|---|---|---|
| Depth | 350 mm | 12.6 inches | 11.1 inches | 350 mm | 350 mm |
| Ethernet Technology | Gigabit Ethernet | 10/100/1000 | 10/100/1000 | Gigabit Ethernet | Gigabit Ethernet |
| Flash Memory | 32 MB | 64 MB | 64 MB | 32 MB | 32 MB |
| Form Factor | Rack-Mount 1U | Rack-mount | Rack-mount | Rack-Mount 1U | Rack-Mount 1U |
| Height | 44 mm | 1.73 inches | 1.73 inches | 44 mm | 44 mm |
| Manufacturer Part Number | SG500X-24MPP | SF500-48 | SF500-24P | SG500X-24P | SG500X-48MP |
| Memory | 256 MB | 256 MB | 256 MB | 256 MB | 256 MB |
| Switching Capacity | 128 Gbps | 96 Gbps | 32 Gbps | 128 Gbps | 176 Gbps |
| Weight | 4.61 kg | 16 lbs | 11 lbs | 5.25 kg | 5.43 kg |
| Width | 440 mm | 17.3 inches | 17.2 inches | 440 mm | 440 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 16 March 2024
Professional-grade, durable, and easy to configure.
Reviewed on the 14 April 2018
Consistent PoE+ output and stable network operation.
Reviewed on the 23 March 2018
Reliable and professional-grade switch for demanding environments.
Reviewed on the 31 March 2026
24-port Max PoE+ switch with 4 10G ports delivers high power and reliable performance.
Reviewed on the 3 November 2019
Efficient solution for medium-to-large business networks.
SG500X-24MPP identifies the 500X Gigabit switch configuration with 24 PoE+ access ports, four 10G SFP+ interfaces, and a 740W power budget. The 24 segment corresponds to the access-port count, while the MPP configuration distinguishes the higher-power version from the 375W SG500X-24P.
SG500X-24MPP supports a browser-based HTTP/HTTPS interface, a text or menu CLI through console access, SSH or Telnet, and SNMP management. OnPlus provides an additional management path. Administrative authentication and permitted management services should be configured before connecting the management interface to an operational network.
SG500X-24MPP belongs to the retired Cisco 500 Series Stackable Managed family, for which Cisco service and support have ended. New-sealed condition does not restore manufacturer support. Purchases that require ongoing Cisco assistance must distinguish physical hardware condition from the availability of manufacturer support.
ORM Systems offers SG500X-24MPP new sealed with up to a 3-year extended warranty or certified refurbished with up to a 1-year warranty. Returns are available for 30 days on every condition; terms apply. Cisco originally provided a limited lifetime hardware warranty, but support for this retired family has ended.
SG500X-24MPP provides a 740W PoE budget, whereas SG500X-24P provides 375W. Both configurations have 24 powered Gigabit access ports and four 10G SFP+ interfaces, and both are retired. The MPP configuration accommodates a larger aggregate endpoint power requirement; the P configuration has a lower available budget.
SG500X-24MPP has 24 Gigabit PoE+ access ports, while SG500X-48MP has 48. Both provide a 740W aggregate PoE budget and four 10G SFP+ interfaces, and both are retired. The 24-port configuration addresses lower connection counts; the 48-port configuration accommodates more endpoints sharing the available power.
SG500X-24MPP supplies four 10G SFP+ interfaces, while SG500-28MPP supplies Gigabit uplink interfaces with 5G stacking capability. Both are retired configurations with 24 Gigabit PoE+ access ports. The 500X configuration addresses installations requiring 10G uplinks; the SG500 configuration serves existing installations using its slower uplink arrangement.
SG500X-24MPP provides a 740W aggregate PoE budget across 24 powered access ports, with a maximum of 30W per port. The aggregate budget and individual-port limit are separate constraints. Endpoint selection must therefore account for both total requested power and the maximum requirement of each attached device.
The Cisco 500X configuration supports SFP-10G-SR for multimode fiber and SFP-10G-LR for single-mode fiber in its SFP+ interfaces. Select the optic according to the installed fiber and required reach. A transceiver occupies a fixed interface; purchasing an optic does not add another physical uplink port.
SG500X-24MPP hardware stacking supports eight members in one stack, with ring or chain connection arrangements. Short copper connections can use SFP-H10GB-CU1M, SFP-H10GB-CU3M, or SFP-H10GB-CU5M. Stack connections use the built-in SFP+ interfaces, so the connection plan must reserve interfaces that would otherwise be available for external uplinks.
The Cisco 500X supports static IPv4 routing, static IPv6 routing, RIP v2, and VRRP. Its static IPv4 routing capacity is 2048 routes, with 256 IP interfaces. Under the routing classification used here, static routing and RIP place this configuration in Layer 2+ rather than an OSPF-based Layer 3 tier.
SG500X-24MPP uses an internal universal AC power supply accepting 100-240V AC. Maximum consumption with PoE included reaches 851.08W at 110V, rather than representing only the switch electronics. Size the electrical circuit and backup-power allocation around the complete powered installation, including the connected endpoints.
United States
