Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$450.45
Quantity:
WS-C4506-E
Cisco WS-C4506-E Catalyst 4500E Modular Chassis Switch
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
WS-C4506-E is a six-slot modular enterprise access chassis, not a populated Ethernet switch. The Catalyst 4500E enclosure accommodates one supervisor engine and five interface cards; access speeds, fiber connectivity, endpoint power and routing depend on the selected configuration. WS-X4596-E provides chassis cooling, while power supplies are ordered separately. The discontinued WS-C4507R+E supports redundant supervisors, unlike this single-supervisor enclosure. Distinguish the chassis PID from a complete switch bundle when specifying the equipment list.
WS-C4506-E price for new stock is $7,479.44. WS-C4506-E refurb price is $450.45. WS-C4506-E is in stock and available for next-day dispatch. (terms applied)
Request bulk order quote for WS-C4506-E for additional pricing. Browse the full Cisco 4507 Catalyst 4500 Chassis series or explore all Cisco products.
240 Gbps backplane capacity provides 48 Gbps full duplex per interface slot; actual forwarding performance depends on the installed supervisor. WS-C4506-E has a 120W chassis-only maximum for facility planning, excluding the assembled configuration's additional electrical loads. Four fans operate within WS-X4596-E, drawing air from right to left; supply airflow runs front to back. Individual fan failure requires replacing WS-X4596-E. Cisco Catalyst 4500 Series configurations support CLI administration and Cisco Prime Infrastructure management through their supervisor engine.
Order WS-C4506-E new sealed or certified refurbished, specifying the required configuration and quantities on the PO. Certified refurbished chassis are inspected and bench-tested for power-on, module bay recognition and fan status. ORM provides up to a 3-year extended warranty on new units, up to 1 year on certified refurbished units, and 30-day returns on every condition, terms apply; Cisco warranty and service ended October 31, 2025. Enterprise and volume orders can use accepted POs, Net-30 for government and RMA with advance replacement, with regional stock and RMA coverage in the UK, EU, US and MEA.
| Key Specs | Key Spec Values |
|---|---|
Max Power Draw | 120W chassis only |
Cooling | 4 fans in WS-X4596-E |
Replaces | WS-C4506; end of sale July 31, 2010 |
Ships Without | Power supply / supervisor engine / interface cards |
Lifecycle Status | Cisco service ended October 31, 2025 |
Replacement PID | C9407R |
In a mid-sized enterprise campus of 500+ users, the WS-C4506-E Catalyst 4500 E-Series 6-Slot Chassis (fan, no PS) is deployed as a distribution-layer switch. Six WS-X4716-SFP modules provide up to 96 SFP ports, aggregating PoE+ access switches and 802.11ac wireless controllers. Benefit: Consolidated management via Cisco IOS XE enables end-to-end QoS for voice, video and data, while the chassis’ 720 Gbps non-blocking architecture and front-to-back airflow with redundant fan modules maximize uptime and simplify network expansion.
In a small data center supporting 300 virtual servers, the WS-C4506-E chassis is used as a top-of-rack aggregation switch. Four WS-X4648-10GE modules deliver 48 fixed 10 Gigabit ports, linking server racks to a core spine. Benefit: Non-blocking 720 Gbps switching capacity reduces contention, while modular slot design allows seamless incremental upgrades. Integrated Cisco TrustSec and AVC deliver granular security and application visibility at line rate.
A regional service provider uses the WS-C4506-E Catalyst 4500 E-Series chassis as a metro PoP aggregation node. Dual WS-X45-GPZB service modules enable hardware-accelerated MPLS VPN for business customers and traffic separation for multi-tenant SLA enforcement. Benefit: Carrier-grade availability is achieved through redundant fan trays and hot-swappable modules. The flexible 6-slot architecture supports gradual growth, lowering CAPEX while delivering predictable performance and end-to-end QoS.
When consolidating copper connections into one enclosure, a populated chassis supports 240 Gigabit Ethernet access ports. WS-X4748-RJ45-E provides 48 Gigabit copper interfaces per card. Port capacity is not included with the bare enclosure; specify compatible card quantities, supervisor requirements and assembled-system power before issuing the PO.
When staging a chassis with two supplies, the minimum configuration must include WS-X4596-E, a supervisor and an additional module. An incomplete bench configuration can produce a false OUTPUT FAIL indication. Confirm the installed test configuration before treating that indication as a supply fault or ordering replacement hardware.
Redundant supervisor engines
WS-C4506-E accepts one supervisor and cannot provide supervisor redundancy. C9407R is the current seven-slot alternative with redundant supervisor capability, rather than another discontinued Catalyst 4500E enclosure.
Continuing Cisco service coverage
Cisco service for WS-C4506-E ended October 31, 2025. C9407R is the current replacement for procurement requiring continuing manufacturer support, with a different seven-slot chassis configuration.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
WS-C4510R+E | |||||
|---|---|---|---|---|---|
| Depth | 317 mm | 317 mm | 317 mm | 317 mm | 317 mm |
| Form Factor | Chassis | Chassis | Chassis | Chassis | Chassis |
| Height | 441.3 mm | 311.2 mm | 618.4 mm | 618.4 mm | 311.2 mm |
| Manufacturer Part Number | WS-C4506-E | WS-C4503 | WS-C4510R+E | WS-C4510R-E | WS-C4503-E |
| Weight | 18.37 kg | 34.02 kg | 24.73 kg. | 45.4 kg | 14.63 kg |
| Width | 439.7 mm | 439.7 mm | 439.7 mm | 439.7 mm | 439.7 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Reviewed on the 6 September 2026
6-slot Catalyst 4500E chassis is reliable and easy to manage for mid-sized enterprise deployments.
Reviewed on the 25 September 2019
Professional-grade stability with minimal downtime and consistent throughput.
Reviewed on the 18 April 2023
Durable chassis with efficient cooling and enterprise-class reliability.
Reviewed on the 17 November 2021
Easy deployment and excellent performance across all 6 slots.
Reviewed on the 23 September 2019
Ideal for backbone networks requiring stable and predictable connectivity.
WS-C4506-E identifies the Catalyst 4500E six-slot chassis supplied with WS-X4596-E and without a power supply. The 4506 model designation identifies the six-slot enclosure, while E identifies E-Series. The chassis PID does not specify an installed access-port configuration or a supervisor software tier.
The Catalyst 4500E is managed through the installed supervisor's CLI and Cisco Prime Infrastructure. Compatible supervisor choices run Cisco IOS or Cisco IOS XE. WS-C4506-E is the enclosure order, so management functions require a supervisor and its corresponding software rather than the chassis alone.
WS-C4506-E reached end of sale on October 30, 2020, and Cisco service ended October 31, 2025. Vulnerability and security support also ended October 31, 2025. C9407R is the current replacement chassis; purchasing remaining inventory does not restart the discontinued model's manufacturer support period.
ORM offers WS-C4506-E new sealed or certified refurbished, with up to a 3-year extended warranty for new units and up to 1 year for refurbished units. Returns are available for 30 days in either condition, terms apply. Cisco's original Limited Lifetime Hardware Warranty and service ended October 31, 2025.
WS-C4506-E does not include a supervisor software tier because the PID orders the chassis rather than a licensed switch bundle. Catalyst 4500E configurations offer LAN Base, IP Base and Enterprise Services, with software activation licenses enabling upgrades. Cisco ONE is another software purchasing option for the family.
WS-C4506-E replaced WS-C4506, the non-E six-slot Catalyst 4500 chassis that reached end of sale July 31, 2010. Both enclosure generations are now discontinued. Buyers maintaining an existing system should verify its assembled configuration; current replacement procurement moves forward to the seven-slot C9407R.
WS-C4506-E accommodates five interface cards, whereas WS-C4503-E accommodates two. Both support one supervisor engine, and both are discontinued. WS-C4506-E suits replacement orders retaining a larger existing card configuration; WS-C4503-E serves an existing smaller enclosure footprint rather than being a current-generation alternative.
WS-C4506-E supports one supervisor engine, whereas WS-C4507R+E supports redundant supervisors. Both models are discontinued and provide five interface-card positions. WS-C4506-E suits an existing single-supervisor chassis configuration; WS-C4507R+E serves legacy systems already requiring redundant supervisors. Current replacement orders should instead evaluate C9407R.
C9407R is a current seven-slot Catalyst 9400 chassis, whereas WS-C4506-E is a discontinued six-slot Catalyst 4500E chassis. C9407R is the named replacement, not an identical enclosure order. WS-C4506-E serves existing-system hardware maintenance; C9407R suits procurement moving to the current modular access family.
The Catalyst 4500E WS-C4506-E chassis occupies 10 rack units and measures 441.3 mm high, 439.7 mm wide and 317 mm deep. Chassis weight with WS-X4596-E is 18.37 kg. Allow 160 mm between chassis vents and walls, and 305 mm horizontal separation between adjacent chassis.