Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
WS-CBS3130G-S
Cisco WS-CBS3130G-S Dell M1000e Blade Stackable Ethernet Swi...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
WS-CBS3130G-S is a Cisco Catalyst 3130 dell m1000e blade stackable ethernet switch built for a compatible Dell blade enclosure. The documented interface layout includes sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. The exact installed module population governs available external connections. The switch uses dell m1000e enclosure backplane and a modular installation. No network port supplies PoE, so attached devices need another power source. Before replacing an installed unit, match the physical label, network cable map, and configuration file to the order. The choice of copper or fiber uplink media determines which transceivers or optional modules must be included. This hardware is most suitable when an existing Cisco platform requires the same form factor and established management behavior.
WS-CBS3130G-S price is is available on request. Get immediate quote.
Request bulk order quote for WS-CBS3130G-S for additional pricing. Browse the full Cisco Catalyst Blade Switches series or explore all Cisco products.
The access and uplink layout of WS-CBS3130G-S separates endpoint connections from distribution handoffs: sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. Optional uplink bays must be populated with the module appropriate to the intended network media. Hardware stacking status is n/a, and any stack interconnect is separate from endpoint cabling. The installed enclosure or external supply must be verified from the unit label before replacement. The managed software should be verified during refurbishment and configuration should be cleared to factory default before redeployment. Check every copper port at its rated speed and confirm optics recognition where SFP cages are present. StackWise Plus ports and optional uplink bays are distinct; confirm matching enclosure, software image, stack cabling, and installed uplink module before ordering.
ORM Systems offers WS-CBS3130G-S new sealed and certified refurbished. Refurbished managed units are inspected, bench-tested, firmware verified, and wiped to factory default; copper port links and applicable optics bays are checked. Specify the exact full PID, dell m1000e enclosure backplane, installation form, required cables, and any fiber optics or optional modules on the PO. New units carry up to a three-year extended ORM warranty, certified refurbished units up to one year, and both have 30-day returns subject to terms. Purchase orders are accepted, Net-30 is available for government buyers, and RMA with advance replacement is offered across UK, EU, US, and MEA stock locations.
| Key Specs | Key Spec Values |
|---|---|
Port Configuration | 16 blade 1G / 4 copper 1G / 2 uplink bays |
Cooling | Enclosure airflow |
An existing Catalyst 3130 installation needs a like-for-like spare because the chassis and configuration are already deployed. WS-CBS3130G-S provides sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. Confirm the exact PID, physical slot or rack position, port map, and existing management configuration before the purchase order.
A distribution connection requires a review of copper and optical media. WS-CBS3130G-S has sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. Identify which positions are shared or depend on an optional module, then specify compatible optics, cable lengths, and the peer port speed before the purchase order.
A maintenance team holds a replacement for a deployed Catalyst 3130 switch. WS-CBS3130G-S must match the installed software image, power method, and enclosure or rack arrangement. Record the boot result, port-link checks, firmware file, and restoration procedure before the purchase order.
Power to connected endpoints
WS-CBS3130G-S has no PoE output. Select a documented powered access platform when attached phones, cameras, or wireless endpoints require power from the switch.
Different physical installation
WS-CBS3130G-S uses modular installation with dell m1000e enclosure backplane. Select a switch built for the target enclosure or rack where these physical requirements do not match.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| WS-CBS3130G-S |  WS-CBS3110X-S |  WS-CBS3110G-S |  WS-CBS3030-DEL |  WS-CBS3012-IBM | |
|---|---|---|---|---|---|
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet |
| Form Factor | Modular | Modular | Modular | Modular | Modular |
| Manufacturer Part Number | WS-CBS3130G-S | WS-CBS3110X-S | WS-CBS3110G-S | WS-CBS3030-DEL | WS-CBS3012-IBM |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
WS-CBS3130G-S is the Cisco Catalyst 3130 dell m1000e blade stackable ethernet switch. Its published port arrangement includes sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. Confirm the exact label on the installed unit because blade enclosure fit, regional supplies, and uplink media can vary by ordered configuration.
WS-CBS3130G-S provides sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. Access and uplink interfaces serve different roles, and optional uplink modules must be checked in the actual installed chassis. Document each active peer connection, cable type, and optic before replacing the unit so a spare can restore the same links.
WS-CBS3130G-S does not provide PoE output on its network interfaces. Attached phones, cameras, and access points need a separate power source or a different powered switch. The chassis power input runs the switch itself and does not establish a shared endpoint power budget. Confirm endpoint requirements before ordering.
WS-CBS3130G-S receives power through dell m1000e enclosure backplane. Confirm the regional cord, external adapter, or compatible blade enclosure as applicable before ordering. The physical power arrangement must match the installed unit; a switch with the right port count can still fail a replacement if its power connection differs.
WS-CBS3130G-S has a documented hardware stacking design. Its stack status is n/a, with physical stack links distinct from ordinary access connections. Check member software compatibility and the required stack interconnect before adding a replacement, and retain a saved configuration for the existing installation.
WS-CBS3130G-S should be evaluated against its actual port and uplink layout, which includes sixteen internal Gigabit blade links, four external Gigabit copper ports, two optional uplink bays, and StackWise Plus ports. A model-specific switching capacity is not supplied in this listing. Compare the installed traffic design and peer connection speed with the hardware label before approving the replacement order.
WS-CBS3130G-S is intended for a compatible Dell blade chassis and receives power from the enclosure backplane. Verify the chassis generation, I/O slot, midplane connection, and any optional uplink module before purchase. A standard rack switch cannot replace the module without changing the installation design.
WS-CBS3130G-S uses copper media where the applicable fixed interface or optional uplink module is populated. Optics are chosen for fiber type, link distance, and peer speed, then ordered separately unless a quote explicitly includes them. Confirm the actual module and cage on the unit before specifying a transceiver.
WS-CBS3130G-S is offered by ORM Systems new sealed or certified refurbished. New units carry up to a three-year extended warranty, while certified refurbished units carry up to one year. Both have 30-day returns subject to terms. Confirm the condition, required accessories, and replacement schedule on the purchase order.
WS-CBS3130G-S should be quoted using the full PID and the installation's port and power requirements. ORM Systems accepts purchase orders and offers Net-30 terms for government buyers, with regional stock in the UK, EU, US, and MEA. Confirm optics, modules, and RMA coverage before issuing the PO.
United States
