Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
CBS350-8FP-2G-UK
Cisco CBS350-8FP-2G-UK Business 350 8-Port Gigabit PoE+ Desk...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
CBS350-8FP-2G-UK is a fanless, managed Layer 2+ desktop switch with eight Gigabit PoE+ access ports and two fixed 1G copper/SFP combo uplinks. The Business 350 connects and powers IP phones, wireless access points and surveillance endpoints in small-office networks. Each combo interface uses either its copper connection or its SFP slot, so choosing fiber does not create an extra uplink. The discontinued CBS350-8P-2G-UK has a smaller 67W endpoint-power allocation. An internal AC supply avoids a separate external power adapter. Guest VLAN and protected-port functions separate visitors from office resources, allowing the access configuration to distinguish shared services from endpoints that must remain isolated.
CBS350-8FP-2G-UK price is is available on request. Get immediate quote.
Request bulk order quote for CBS350-8FP-2G-UK for additional pricing. Browse the full Cisco CBS350 Business Switches series or explore all Cisco products.
20 Gbps switching capacity and 14.88 Mpps forwarding at 64-byte packets support wire-speed traffic across active links. 120W of shared PoE power serves attached endpoints, so total allocation must follow their combined demand. Static routing, RIP v2 and PBR handle local subnet forwarding and policy-based next-hop selection. CBS350-8FP-2G-UK uses 512 MB DRAM and 256 MB flash, with a 1.5 MB packet buffer shared across the ports. STP/RSTP/MSTP controls Layer 2 loops, while LACP groups eligible links for aggregation. The MAC table holds 16000 learned addresses, setting the learning allowance for connected devices. Browser configuration, CLI access and SNMP give Cisco Business switches local and remote administration paths. Hardware stacking is unavailable on this model. 148.12W maximum consumption with PoE sets the electrical load for AC-feed sizing, rather than treating endpoint power as total draw.
Choose new sealed or certified refurbished CBS350-8FP-2G-UK units from ORM Systems, with up to a 3-year extended warranty on new stock, up to 1 year on certified refurbished stock, and 30-day returns on every condition; terms apply. Certified refurbished units are inspected and bench-tested for power-on and POST, every port linking at rated speed, PoE output under load on every powered port, and optics bay recognition; firmware is verified and configuration wiped to factory default. Specify condition, quantities and required optics on the PO. For enterprise and volume purchases, ORM Systems accepts POs, offers Net-30 for government and RMA with advance replacement, with regional stock and RMA support in the UK, EU, US and MEA.
| Key Specs | Key Spec Values |
|---|---|
Port Configuration | 8 x 1G PoE+ / 2 x 1G combo |
PoE Budget | 120W shared |
Max Power Draw | 148.12W |
Cooling | Fanless |
Lifecycle Status | End of sale October 29, 2024 |
Replacement PID | C1300-8FP-2G |
When office expansion adds separate local IP networks, the switch supports 128 IP interfaces on physical ports, VLAN interfaces, link aggregation groups or loopback interfaces. That interface allowance is separate from the forwarding-table limit. Map the address plan and required interface types before specifying the hardware on the PO.
When an existing estate needs consistent remote administration, Cisco Business Dashboard can use the switch's embedded probe without a separate probe appliance or virtual machine at each site. That management arrangement does not change the hardware configuration. Specify management enrollment and site inventory details alongside each unit ordered.
When replacement units require a controlled firmware rollout before entering service, dual software images retain an alternate image alongside the selected startup image. Firmware transfers can use the web interface or SCP over SSH. Confirm the approved images, transfer method and configuration baseline before placing the hardware order.
10G uplinks to distribution
Both fixed copper/SFP combo uplinks stop at 1G. CBS350-8FP-2G-UK cannot provide 10G uplinks, and no removable uplink card can change that limit.
Hardware stacking with shared control
CBS350-8FP-2G-UK does not support hardware stacking. Centralized management does not combine multiple units into a stack with a shared forwarding and control plane.
Ongoing software and security fixes
Software maintenance and vulnerability support ended October 29, 2025. The current C1300-8FP-2G replacement retains eight Gigabit access ports and two 1G combo uplinks.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Depth | 272 mm | 210 mm | 240 mm | 185 mm | 185 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet | Gigabit Ethernet |
| Flash Memory | 256 MB | 256 MB | 256 MB | 256 MB | 256 MB |
| Form Factor | Desktop | Desktop | Rack-Mount 1U | Desktop | Desktop |
| Height | 44 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | CBS350-8FP-2G-UK | CBS350-16P-E-2G-UK | CBS350-24T-4X | CBS350-8T-E-2G | CBS350-8T-E-2G-EU |
| Memory | 512 MB | 512 MB | 512 MB | 512 MB | 512 MB |
| Power Consumption | 148.12W | 150.1W | 27.54W | 12.56W | 12.56W |
| Switching Capacity | 20 Gbps | 36 Gbps | 128 Gbps | 20 Gbps | 20 Gbps |
| Weight | 2.59 kg | 1.42 kg | 2.78 kg | 1.39 kg | 1.39 kg. |
| Width | 268 mm | 268 mm | 445 mm | 268 mm | 268 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
CBS350-8FP-2G-UK names the Cisco Business 350 configuration: CBS350 is the series, 8 is eight Gigabit access ports, FP is Full PoE with a 120W budget, and 2G is two Gigabit copper/SFP combo uplinks. UK is the regional ordering suffix used in the United Kingdom and several other markets.
Cisco Business 350 switches are managed through the HTTP/HTTPS web interface, CLI over SSH or Telnet, the RJ-45 console, SNMP, Cisco Business Dashboard and the Cisco Business mobile app. The embedded Dashboard probe avoids a separate probe device. Select the administration method and access permissions before deployment.
CBS350-8FP-2G-UK provides a 120W shared PoE budget across eight powered access ports and supports PoE+ and PoE devices. The allocation is a switch-wide pool, not 120W for each port. Sum endpoint requirements before ordering; the Full PoE designation does not promise maximum simultaneous power on every connection.
CBS350-8FP-2G-UK has two fixed 1G copper/SFP combo uplinks, with either copper or SFP active on each interface. MGBSX1 supports multimode fiber, while MGBLX1 supports single-mode fiber. Select compatible optics for the installed fiber; the combo connections do not operate as additional independent uplink ports.
CBS350-8FP-2G-UK supports static routing, RIP v2 and PBR, with 990 static routes and 128 IP interfaces. Physical ports, VLANs, link aggregation groups and loopback interfaces can carry routed interfaces. The routing design must stay within those route and interface allowances when assigning local subnets and next-hop policies.
No, CBS350-8FP-2G-UK does not support hardware stacking, even though other Cisco Business 350 models do. Cisco Business Dashboard can manage multiple devices without turning their forwarding and control planes into one stack. Order this model as a standalone managed switch rather than as an additional hardware stack member.
CBS350-8FP-2G-UK uses an internal AC supply accepting 100-240V at 50-60 Hz, without an external power adapter or redundant internal supply. Maximum consumption with PoE is 148.12W. Specify the regional power connection and size the AC feed for the whole switch, not only its endpoint-power allocation.
Cisco Business 350 switches require no switch license or subscription; all software features come with the hardware purchase. There is no minimum subscription term or separate network-license tier to add to the PO. That switch-software requirement remains unchanged when purchasing an ORM certified refurbished unit.
CBS350-8FP-2G-UK reached end of sale on October 29, 2024; software maintenance and vulnerability support ended October 29, 2025. The last date of Cisco support is October 31, 2029. C1300-8FP-2G is the current replacement for buyers moving from the discontinued model to the Catalyst 1300 series.
ORM Systems offers CBS350-8FP-2G-UK new sealed with up to a 3-year extended warranty, or certified refurbished with up to 1 year. Both conditions have 30-day returns; terms apply. Separately, Cisco's limited lifetime platform warranty provides next-business-day advance replacement where available, bounded by the last support date of October 31, 2029.
CBS350-8FP-2G-UK allocates 120W to PoE, while CBS350-8P-2G-UK allocates 67W; both models are discontinued. The distinction is shared endpoint-power capacity rather than the number of powered access ports. Retained installations with lighter aggregate loads match the 67W model, while higher aggregate allocations match the 120W configuration.
CBS350-8FP-2G-UK uses an internal AC supply, whereas CBS350-8FP-E-2G-UK uses an external AC adapter; both models are discontinued. This difference changes the power connection and the separate hardware that accompanies the unit. Internal-supply installations match the former, while legacy installations retaining an external-adapter arrangement match the latter.
C1300-8FP-2G is the current Catalyst 1300 replacement for the discontinued CBS350-8FP-2G-UK. Both have eight Gigabit access ports, Full PoE and two 1G combo uplinks. The Business 350 model fits like-for-like legacy sparing, while new equipment standardization follows the current C1300-8FP-2G lifecycle rather than the discontinued predecessor.
CBS350-8FP-2G-UK provides 20 Gbps switching capacity and 14.88 Mpps forwarding for 64-byte packets. A 1.5 MB shared packet buffer serves all ports, while STP/RSTP/MSTP and LACP control loop prevention and link aggregation. Use those limits when comparing traffic handling rather than counting connector openings.
Yes, Cisco Business 350 switches support guest VLANs, protected ports and private VLANs for traffic separation. Protected ports restrict communication between selected devices while retaining access to uplinks. Define which endpoints must remain isolated and which shared services they need before applying the segmentation policy.