Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$486.00
$399.0017.9% off
Quantity:
UCSB-VIC-M84-4P
Cisco UCSB-VIC-M84-4P VIC 1480 1-Port 40G Internal Mezzanine...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSB-VIC-M84-4P is a Cisco UCS VIC 1480 Virtual Interface Card with 1 x 40G or 4 x 10G internal Ethernet and FCoE paths on a rear mezzanine form factor for UCS B200 M5. SingleConnect brings LAN, SAN and management traffic through the blade fabric. A Cisco UCS B200 M5 network adapter build uses this card in the rear mezzanine connector, with B200 M6 and B480 M5 also in the fit set. The ports connect through UCS fabric extenders or fabric interconnects, not front-panel optics. UCSB-MLOM-40G-04 is the mLOM sibling for the same B-Series M5 and M6 blade families; the VIC 1480 uses the rear mezzanine connector.
UCSB-VIC-M84-4P price for new stock is $321.20, a 33.9% saving from the Cisco list price of $486.00. UCSB-VIC-M84-4P refurb price is $399.00. UCSB-VIC-M84-4P is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for UCSB-VIC-M84-4P for additional pricing. Browse the full Cisco UCS VIC 1400 Converged Network Adapters series or explore all Cisco products.
1 x 40G or 4 x 10G Ethernet and FCoE operation defines the internal uplink mode. PCIe 3.0 x16 host connectivity gives the blade a host path for virtual NIC and HBA presentation. 256 virtual interfaces are rated for the VIC 1400 family, with about eight reserved internally and operating system or hypervisor limits still applying. 21W maximum power and 148.6 mm depth, 73.7 mm width and 33.8 mm height set the chassis planning figures. UCSB-VIC-M84-4P uses a Cisco UCS custom ASIC and carries SR-IOV, usNIC, VM-FEX, DPDK, NetFlow, NPIV, GENEVE, VXLAN, NVGRE, iSCSI boot and RoCEv2 capability. UCS Manager 4.0(1a) is the adapter floor with UCS 6200, 6332, 6332-16UP and 6454 fabric interconnects; UCS 64108 needs 4.1(1a).
New sealed units carry up to 3-year extended warranty, and certified refurbished units carry up to 1 year. Returns are 30 days on every condition; terms apply. Certified refurbished UCSB-VIC-M84-4P is inspected and bench-tested in a compatible host, and every port links at rated speed. Specify the rear mezzanine card and confirm 2 CPUs, the mLOM card, UCS Manager release and fabric interconnect family before the PO. Regional stock and RMA with advance replacement cover the UK, EU, US and MEA; PO accepted and Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Ports | 0 external; 1 x 40G or 4 x 10G internal |
Fits | UCS B200 M5, B200 M6, B480 M5 |
Lifecycle Status | End of sale on 10 April 2026 |
Form Factor | Rear Mezzanine |
Virtual Interfaces | 256 |
Minimum Software | UCSM 4.0(1a); UCS 64108 needs 4.1(1a) |
A data center replacing a failed rear mezzanine VIC in a UCS B200 M5 or UCS B200 M6 keeps the existing 10/40G blade fabric design. The PO should specify UCSB-VIC-M84-4P, 2 CPUs, the installed mLOM card and the fabric interconnect family.
A blade expansion project that already uses UCS B-Series M5 or M6 servers can add the rear mezzanine VIC path without front-panel transceivers. The chassis build must keep the rear mezzanine connector free and match the mLOM requirement before the PO.
A lab staging pool for UCS Manager releases can use the VIC 1480 to mirror 10/40G production blade traffic. The staging bill should match the blade generation, rear mezzanine connector, mLOM choice and the 4.0(1a) or 4.1(1a) fabric interconnect floor.
Rack server adapter need
UCS C220 M5 and UCS C240 M5 do not take this rear mezzanine blade adapter; 10/25G rack builds take UCSC-PCIE-C25Q-04.
mLOM slot requirement
A B-Series mLOM slot does not take UCSB-VIC-M84-4P; the 10/40G mLOM choice for B-Series M5 and M6 blades is UCSB-MLOM-40G-04.
Single-CPU blade build
UCS B200 M5 and UCS B200 M6 require 2 CPUs for this rear mezzanine VIC; a single-CPU network build stays with the mLOM card.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSB-VIC-M84-4P |  UCSB-MLOM-40G-04 |  UCSC-M-V100-04 |  UCSC-MLOM-C100-04 |  UCSC-PCIE-C100-04 | |
|---|---|---|---|---|---|
| Adapter Type | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card |
| Connector Type | Internal | Internal | QSFP28 | QSFP28 | QSFP28 |
| Data Rate | 40G | 40G | 100G | 100G | 100G |
| Depth | 148.6 mm | 148.6 mm | 159.8 mm | 146.1 mm | 167.6 mm |
| Form Factor | Mezzanine | mLOM | mLOM | mLOM | PCIe Card |
| Height | 33.8 mm | 24.4 mm | 18.8 mm | 16 mm | 13.5 mm |
| Power Consumption | 21W maximum | 21 W maximum | 27.9W maximum | 28W maximum | 28W maximum |
| Width | 73.7 mm | 86.4 mm | 101.3 mm | 94 mm | 63.5 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSB-VIC-M84-4P is the Cisco UCS VIC 1480 MEZZ for B-Series, a rear mezzanine Virtual Interface Card for UCS B-Series blades. UCSB marks UCS B-Series, VIC marks Virtual Interface Card and M84-4P separates the VIC 1480 mezzanine option. UCSB-VIC-M84-4P= is the spare form.
UCSB-VIC-M84-4P fits UCS B200 M5, UCS B200 M6 and UCS B480 M5 blade servers. B200 M5 and B200 M6 use the rear mezzanine connector and need 2 CPUs for this adapter. B200 M6 also needs the VIC 1440 mLOM in the blade.
A UCS B200 M5 uses UCSB-VIC-M84-4P as a rear mezzanine VIC when the build needs the VIC 1480. UCSB-MLOM-40G-04 and UCSB-MLOM-40G-03 are mLOM choices. UCSB-VIC-M83-8P is the other rear mezzanine VIC in the same B200 M5 adapter group.
UCSB-VIC-M84-4P has 1 x 40G or 4 x 10G internal Ethernet and FCoE operation, an internal connector, PCIe 3.0 x16 host interface, 21W maximum power and a 148.6 mm by 73.7 mm by 33.8 mm mezzanine card body.
UCSB-VIC-M84-4P has no external cage or front-panel port. The adapter provides an internal 1 x 40G mode or a 4 x 10G mode through the blade fabric. The far end must match the fabric extender, fabric interconnect and port-channel mode used by the chassis.
UCSB-VIC-M84-4P fits the rear mezzanine connector in a UCS B200 M5 or UCS B200 M6. Those blades have one rear mezzanine connector for this class of option. UCS B480 M5 has rear mezzanine connectors and must match the CPU-controlled slot plan before ordering.
UCSB-VIC-M84-4P needs UCS Manager 4.0(1a) with UCS 6200, 6332, 6332-16UP or 6454 fabric interconnects. UCS 64108 needs UCS Manager 4.1(1a). UCS 6536 needs IMM 4.2(2) for the fabric interconnect path.
UCSB-VIC-M84-4P carries Ethernet and FCoE on the internal VIC 1480 paths. The VIC 1400 family also has RoCEv2 for RDMA, SR-IOV, usNIC, VM-FEX, DPDK, NetFlow, NPIV, GENEVE, VXLAN, NVGRE, NVMeoF and iSCSI boot capability.
UCSB-VIC-M84-4P= is the spare ordering form for the same VIC 1480 rear mezzanine adapter. UCSB-VIC-M84-4P is the configured-build form. Both forms fall under the 10 April 2026 end-of-sale milestone, so the PO should match the required code exactly.
The difference is the connector: UCSB-VIC-M84-4P is the VIC 1480 rear mezzanine adapter, while UCSB-MLOM-40G-04 is the VIC 1440 mLOM adapter. Choose the rear mezzanine PID for expansion beside an mLOM; choose the mLOM PID for the blade’s base LAN-on-motherboard slot.
The difference is generation and host range. UCSB-VIC-M84-4P is the VIC 1480 for B-Series M5 and M6 blade use. UCSB-VIC-M83-8P is the VIC 1380 rear mezzanine adapter in B200 M5 and B480 M5 adapter groups, and it is not a B200 M6 rear mezzanine choice.
Cisco stopped selling UCSB-VIC-M84-4P on 10 April 2026, and the last ship date was 9 July 2026. Cisco has not announced a last date of support for UCSB-VIC-M84-4P. No migration product is named for this PID, and the adapter serves UCS B-Series M5 and M6 blades.
ORM supplies UCSB-VIC-M84-4P as new sealed or certified refurbished. New sealed carries up to 3-year extended warranty, and certified refurbished carries up to 1 year. Returns are 30 days on every condition; terms apply. PO accepted, Net-30 for government and RMA with advance replacement apply.
United States
