Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
UCSX-V4-Q25GME
Cisco UCSX-V4-Q25GME VIC 14825 4-Port 25G Internal Mezzanine...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSX-V4-Q25GME is a Cisco UCS VIC 14825 4x25G internal mezzanine Virtual Interface Card for UCS X210c M6 compute nodes. The rear mezzanine network adapter adds an embedded VIC for Ethernet and FCoE paths through the X-Series IFMs, with no external cage on the adapter. A Cisco UCS X210c M6 network adapter build uses the VIC 14825 in the rear mezzanine connector with 2 CPUs, the mandatory mLOM, and the bridge path to the fabric. The 4 x 25G KR interfaces connect internally to UCSX-I-9108-25G or UCSX-I-9108-100G IFMs. The X210c M6 host accepts one rear mezzanine module, so the chassis inventory must show that connector before the PO. UCSX-V4-Q25GML is the companion mLOM; it occupies the mLOM slot while the VIC 14825 occupies the rear mezzanine connector.
UCSX-V4-Q25GME price is is available on request. Get immediate quote.
Request bulk order quote for UCSX-V4-Q25GME for additional pricing. Browse the full Cisco UCS VIC 14000 Converged Network Adapters series or explore all Cisco products.
200G per node is available in the X210c M6 VIC 14425 plus VIC 14825 configuration, with 100G per IFM and 4 vNICs for maximum bandwidth. PCIe Gen3 x16 runs toward CPU2, and two PCIe Gen4 x16 paths run to each X-Fabric for I/O expansion. 256 virtual interfaces are available, with about eight reserved for internal use. UCSX-V4-Q25GME carries the Cisco UCS custom ASIC, 2GB DDR3 DIMMs at 1866 MHz, SR-IOV, usNIC, DPDK, VM-FEX, GENEVE, VXLAN, NVGRE, FCoE, iSCSI boot, NVMeoF and RoCEv2. VMware vSphere, Windows Server, Red Hat Enterprise Linux, Citrix XenServer, SUSE Linux Enterprise Server and Ubuntu are operating-system families for planning driver images. 42.4W maximum power and a 145.03 mm depth, 131.83 mm width and 37.34 mm height set the slot, airflow and inventory checks.
New sealed and certified refurbished conditions cover the Cisco UCS VIC 14825. Certified refurbished units are inspected and bench-tested in a compatible host, and the adapter is recognized by a compatible host. Order UCSX-V4-Q25GME with the X210c M6 generation, 2-CPU build, rear mezzanine connector and mLOM pairing on the chassis label. Warranty is up to 3-year extended for new and up to 1 year for certified refurbished, with 30 days on every condition; terms apply. Regional stock, RMA with advance replacement, PO accepted and Net-30 for government cover UK, EU, US and MEA.
| Key Specs | Key Spec Values |
|---|---|
Ports | 0 external; 4 x 25G KR internal |
Fits | UCS X210c M6 rear mezzanine |
Lifecycle Status | Cisco stopped sales 30 June 2025 |
Form Factor | Mezzanine, rear connector |
Technology | Ethernet / FCoE |
Virtual Interfaces | 256 |
A buyer replacing a failed rear mezzanine VIC in an X210c M6 needs the same rear connector, 2 CPUs, UCSX-V4-Q25GML mLOM, and bridge path. Specify UCSX-V4-Q25GME when the inventory names the VIC 14825 and the service profile expects the 4 x 25G KR layout.
A buyer expanding an X210c M6 from the mandatory mLOM to a second VIC uses the rear mezzanine connector. The build needs 2 CPUs, the included bridge card, and the matching 14425 mLOM path. Before the PO, check the chassis inventory and CPU count.
A buyer pairing an X210c M6 with an X440p PCIe node needs a rear mezzanine path for the X-Fabric connection. The VIC 14825 supports connectivity for Cisco UCS PCIe Nodes while also bridging to the mLOM card. Match the X210c M6 rear connector before the PO.
UCS X-Series M7 server
UCSX-V4-Q25GME does not fit X-Series M7 servers; X-Series M7 servers take Cisco UCS 15000 series VIC adapters for rear mezzanine networking.
UCS VIC 15231 mLOM
UCSX-V4-Q25GME is not supported with the UCS VIC 15231 mLOM in the same X210c M6; use UCSX-V4-Q25GML mLOM for this rear mezzanine card.
Single-CPU X210c M6
UCSX-V4-Q25GME requires 2 CPUs in the X210c M6 rear mezzanine connector; a single-CPU build can run UCSX-V4-Q25GML as the mandatory mLOM.
External SFP28 cabling
UCSX-V4-Q25GME has no external SFP28 cages on the adapter; X210c M6 networking reaches the IFMs through internal KR links and the bridge.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSX-V4-Q25GME |  UCSX-V4-Q25GML |  UCS-VIC-M82-8P |  UCSC-PCIE-C100-04 |  UCSC-MLOM-C25Q-04 | |
|---|---|---|---|---|---|
| Adapter Type | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card |
| Connector Type | Internal | Internal | Internal | QSFP28 | SFP28 |
| Data Rate | 25G | 25G | 10G | 100G | 25G |
| Form Factor | Mezzanine | mLOM | Mezzanine | PCIe Card | mLOM |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSX-V4-Q25GME is the UCS VIC 14825 4x25G mezz for X Compute Node. The PID is the base order code for the rear mezzanine Virtual Interface Card, and UCSX-V4-Q25GME= is the spare form for the same adapter in X210c M6 builds.
UCSX-V4-Q25GME fits UCS X210c M6 compute nodes in the rear mezzanine connector. The build needs 2 CPUs, UCSX-V4-Q25GML mLOM support and the UCSX-V4-BRIDGE path. X-Series M7 servers take Cisco UCS 15000 series VIC adapters for rear mezzanine networking before the PO.
A UCS X210c M6 uses a mandatory mLOM adapter and one optional rear mezzanine adapter. The mLOM choices are UCSX-V4-Q25GML, UCSX-ML-V5D200GV2 and UCSX-ML-V5Q50G. The rear mezzanine choices are UCSX-V4-Q25GME, UCSX-ME-V5Q50G and UCSX-V4-PCIME. The rear connector needs 2 CPUs.
UCSX-V4-Q25GME has 0 external ports, 4 x 25G KR internal interfaces, PCIe Gen3 x16 toward CPU2, 42.4W maximum power, and 145.03 mm depth. Width is 131.83 mm and height is 37.34 mm, so the rear mezzanine connector and airflow path must match.
UCSX-V4-Q25GME provides 4 x 25G KR internal interfaces to the X-Series IFMs through the bridge and mLOM path. The X210c M6 VIC 14425 plus VIC 14825 configuration reaches 200G per node, 100G per IFM, with 4 vNICs for maximum bandwidth.
UCSX-V4-Q25GME uses the single rear mezzanine connector on the UCS X210c M6 motherboard. One card fits each compute node, 2 CPUs are required, and the included UCSX-V4-BRIDGE connects the rear mezzanine card to the mLOM card.
UCSX-V4-Q25GME needs the X210c M6 software floor before the adapter is installed. Use UCSM 4.2(1a) minimum for other FI mode, X-Direct FI 4.3(4.240078) minimum, and server firmware 5.0(1b) minimum through Intersight for this host generation.
UCSX-V4-Q25GME requires UCSX-V4-Q25GML mLOM support in the X210c M6 compute node. The UCS VIC 15231 mLOM cannot share the same server with the VIC 14825 rear mezzanine card, so the mLOM identity must match before the PO.
UCSX-V4-Q25GME supports Ethernet, FCoE and RoCEv2 in the UCS VIC 1400/14000 feature set. The adapter also carries SR-IOV, usNIC, DPDK, VM-FEX, GENEVE, VXLAN, NVGRE, iSCSI boot, NetFlow and NVMeoF features for service-profile builds in UCS Manager or Intersight.
UCSX-V4-Q25GME is the base PID, and UCSX-V4-Q25GME= is the spare form for the same VIC 14825 rear mezzanine adapter. Cisco stopped selling both forms on 30 June 2025, so installed-base orders must match the exact inventory PID.
The difference between UCSX-V4-Q25GME and UCSX-V4-Q25GML is the slot role. UCSX-V4-Q25GME is the VIC 14825 rear mezzanine card, while UCSX-V4-Q25GML is the VIC 14425 mLOM that the X210c M6 build needs for the paired bridge path.
The difference between UCSX-V4-Q25GME and UCSX-ME-V5Q50G is the generation and bridge family. UCSX-V4-Q25GME is the VIC 14825 for the 14000 bridge path; UCSX-ME-V5Q50G is the VIC 15422 secure boot mezzanine card for the 15000 bridge path.
Cisco stopped selling UCSX-V4-Q25GME on 30 June 2025. Cisco has not announced a last date of support for UCSX-V4-Q25GME. The UCS X210c M6 host stopped selling on 30 June 2025, and Cisco service for that host ends 30 June 2030.
ORM sells UCSX-V4-Q25GME in new sealed and certified refurbished condition. New units carry up to 3-year extended warranty, certified refurbished units carry up to 1 year, and 30 days on every condition; terms apply. PO accepted, Net-30 for government and RMA with advance replacement apply.
United States
