Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
UCSX-ML-V5Q50G
Cisco UCSX-ML-V5Q50G VIC 15420 4-Port 25G mLOM Virtual Inter...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSX-ML-V5Q50G is the Cisco UCS VIC 15420 4x25G secure boot mLOM Virtual Interface Card for the Cisco UCS X210c M6 Compute Node. The adapter provides four 25G internal Ethernet and FCoE lanes to the X9108 IFMs through the X9508 chassis. Cisco UCS X210c M6 network adapter searches should match the rear mLOM slot, not the rear mezzanine connector. The X210c M6 must carry one mLOM adapter, and this card operates in single-CPU and dual-CPU configurations. The ports connect to X9108-IFM-25G or X9108-IFM-100G modules and then to UCS fabric interconnects. UCSX-ME-V5Q50G is the rear mezzanine sibling, and it uses UCSX-V5-BRIDGE with the VIC 15420 mLOM for added X210c M6 network capacity.
UCSX-ML-V5Q50G price is is available on request. Get immediate quote.
Request bulk order quote for UCSX-ML-V5Q50G for additional pricing. Browse the full Cisco UCS VIC 15000 Converged Network Adapters series or explore all Cisco products.
512 virtual adapters and interfaces let the VIC present independent PCIe NICs and HBAs without SR-IOV dependence from the operating system or hypervisor. PCIe 4.0 x16 connectivity runs from the mLOM toward CPU1, so the node inventory must show the rear mLOM position before replacement. UCSX-ML-V5Q50G uses a Cisco UCS custom ASIC and secure boot from the 4.3(1) release. FCoE runs over the UCS unified fabric, and RoCEv2 covers NVMe over Fabrics and SMB Direct traffic. VXLAN, NVGRE and GENEVE offloads match virtualized networks, while usNIC, DPDK, NetQueue and VMQ/VMMQ align with the installed OS. Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server and Ubuntu are named operating-system families. The X210c M6 management path is Cisco Intersight or UCS Manager 4.3(2) or later.
UCSX-ML-V5Q50G is offered as new sealed and certified refurbished, with returns 30 days on every condition; terms apply. Certified refurbished units are inspected and bench-tested in a compatible host, and every port links at rated speed. Specify the Cisco VIC 15420 mLOM for an X210c M6 rear mLOM replacement, and match the IFM generation before the PO. New sealed carries up to 3-year extended warranty, and certified refurbished carries up to 1 year. Regional stock and RMA coverage spans UK, EU, US and MEA, with RMA with advance replacement; PO accepted and Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x 25G internal to IFM |
Fits | UCS X210c M6 rear mLOM |
Lifecycle Status | Cisco stopped sales 30 June 2025 |
Form Factor | mLOM, PCIe 4.0 x16 |
Virtual Interfaces | 512 virtual adapters and interfaces |
Minimum Software | UCS Manager 4.3(2) or later |
An X210c M6 node with a failed rear mLOM needs the same VIC 15420 form to restore its IFM uplinks. The part number must match UCSX-ML-V5Q50G on the inventory output, and the chassis label must show X210c M6 before the PO.
An X210c M6 build cannot leave the rear mLOM slot empty because the mLOM adapter provides Ethernet connectivity through the IFMs. The buyer should specify one UCSX-ML-V5Q50G per node and confirm single-CPU or dual-CPU configuration before the PO.
A fabric build using X9108-IFM-25G or X9108-IFM-100G keeps the VIC 15420 at 4 x 25G. The buyer should match the IFM pair, UCS fabric interconnect model and UCS Manager 4.3(2) or later before the PO.
M7 or M8 compute nodes
UCSX-ML-V5Q50G fits X210c M6; X210c M7, X410c M7 and X215c M8 take UCSX-ML-V5Q50G-D as the same VIC 15420 hardware.
Rear mezzanine connector
UCSX-ML-V5Q50G is an mLOM card. The X210c M6 rear mezzanine connector takes UCSX-ME-V5Q50G, with UCSX-V5-BRIDGE connecting mezzanine and mLOM.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSX-ML-V5Q50G |  UCSC-M-V5Q50GV2 |  UCSB-ML-V5Q10G |  UCSX-ME-V5Q50G |  UCSC-M-V5D200G | |
|---|---|---|---|---|---|
| Adapter Type | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card | Virtual Interface Card |
| Connector Type | Internal | SFP+ / SFP28 / SFP56 | Internal | Internal | QSFP / QSFP28 / QSFP56 |
| Data Rate | 25G | 50G | 40G | 25G | 200G |
| Form Factor | mLOM | mLOM | mLOM | Mezzanine | mLOM |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSX-ML-V5Q50G is the Cisco UCS VIC 15420 4x25G secure boot mLOM for Cisco UCS X210c M6 Compute Node. UCSX-ML-V5Q50G= is the spare form. UCSX-ML-V5Q50G-RF is Cisco-remanufactured. UCSX-ML-V5Q50G-D is the same adapter ordered for X210c M7, X410c M7 and X215c M8.
UCSX-ML-V5Q50G fits the Cisco UCS X210c M6 Compute Node in the rear mLOM position. X210c M7, X410c M7 and X215c M8 use the -D platform code, UCSX-ML-V5Q50G-D, even though the VIC 15420 hardware has no functionality or operation difference.
UCS X210c M6 uses UCSX-ML-V5Q50G when the build calls for a 4x25G secure boot mLOM. The same mLOM choice table also contains UCSX-V4-Q25GML for 4x25G and UCSX-ML-V5D200GV2 for the Cisco UCS VIC 15230 modular LOM with secure boot.
UCSX-ML-V5Q50G has 4 x 25G internal IFM ports, 25 Gbps per port, an mLOM form factor, PCIe 4.0 x16 host interface, 512 virtual adapters and interfaces, Cisco UCS custom ASIC, Ethernet technology and FCoE technology.
UCSX-ML-V5Q50G runs 4 x 25G internal Ethernet and FCoE lanes to the IFMs. The X210c M6 host gives 100G per server with the VIC 15420, 50G per IFM, 50G single-vNIC throughput and 25G maximum single-flow bandwidth per vNIC.
UCSX-ML-V5Q50G uses X9108-IFM-25G or X9108-IFM-100G in the UCS X9508 chassis. The VIC 15420 operates at 4 x 25G with both IFM options, so the far end must match the IFM pair and the UCS fabric interconnect generation.
One UCSX-ML-V5Q50G fits the X210c M6 rear mLOM position. The X210c M6 must have one mLOM adapter, and that adapter operates in single-CPU and dual-CPU configurations. The separate rear mezzanine connector takes mezzanine options, not this mLOM PID.
UCSX-ML-V5Q50G needs the X210c M6 management floor first: UCS Manager 4.3(2) or later when UCS Manager controls the node. The VIC 15420 has IMM 4.3(1) or later as the recommended adapter release, and Cisco Intersight is the X-Series management path.
UCSX-ML-V5Q50G supports FCoE over the UCS unified fabric and RoCEv2 for RDMA functions. The VIC 15000 feature set also covers NVMe over RoCEv2 with RHEL and ESXi, SMB Direct on Windows Server 2019 and Windows Server 2022, and FC-NVMe with RHEL, SLES and ESXi.
UCSX-ML-V5Q50G has UCSX-ML-V5Q50G= as the spare ordering form and UCSX-ML-V5Q50G-RF as the Cisco-remanufactured form. Cisco-remanufactured is a Cisco condition and is separate from certified refurbished. The M7 and M8 platform form is UCSX-ML-V5Q50G-D.
UCSX-ML-V5Q50G fits X210c M6, while UCSX-ML-V5Q50G-D fits X210c M7, X410c M7 and X215c M8. The adapter hardware has no functionality or operation difference. Choose the PID that matches the compute-node generation on the chassis label.
UCSX-ML-V5Q50G is the rear mLOM adapter, while UCSX-ME-V5Q50G is the rear mezzanine adapter for the X210c M6. The mezzanine card needs UCSX-V5-BRIDGE to connect the VIC 15420 mLOM and VIC 15422 mezzanine card inside the X210c M6.
Cisco stopped selling UCSX-ML-V5Q50G on 30 June 2025. Cisco has not announced a last date of support for UCSX-ML-V5Q50G. The UCS X210c M6 compute node stopped sales on 30 June 2025, and Cisco service ends for the node on 30 June 2030.
ORM offers UCSX-ML-V5Q50G new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host, with board, connector and housing inspected and every port links at rated speed. New sealed carries up to 3-year extended warranty, certified refurbished carries up to 1 year, and returns are 30 days on every condition; terms apply.
United States
