Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$643.64
Quantity:
UCSC-PCIE-B3SFP
Cisco UCSC-PCIE-B3SFP Broadcom 57810 2-Port 10G SFP+ PCIe Et...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSC-PCIE-B3SFP is a Cisco UCS C-Series Ethernet Adapter with the Broadcom 57810 model, 2 x 10G SFP+ ports, a PCIe x8 host interface and low-profile card height for UCS C22 M3. The Cisco UCS C22 M3 network adapter fits either PCIe riser slot, and one-CPU chassis builds have one usable option-card position. Ethernet and FCoE traffic use the same SFP+ cages, so the top-of-rack switch or fabric port must run 10 Gbps and match the cable or optic. Broadcom BCM57810S controller functions cover TOE, iSCSI, FCoE, SR-IOV, DCB and RDMA. UCSC-PCIE-BTG is the 10GBASE-T sibling for RJ-45 copper runs on the same host generation.
UCSC-PCIE-B3SFP price for new stock is $733.95. UCSC-PCIE-B3SFP refurb price is $643.64. UCSC-PCIE-B3SFP is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for UCSC-PCIE-B3SFP for additional pricing. Browse the full Cisco UCS Broadcom Network Adapters series or explore all Cisco products.
Two SFP+ cages connect through SFP-H10GB-CU1M, SFP-H10GB-CU3M, SFP-H10GB-CU5M, SFP-H10GB-ACU7M, SFP-H10GB-ACU10M, SFP-10G-SR or SFP-10G-LR for C22 M3 network ports. One or two cables or optical modules attach to each card, so dual-switch designs need two matching link PIDs per adapter. Half-height card fit lets UCSC-PCIE-B3SFP use slot 1 or slot 2, while a PCIe RAID controller reserves the half-height position and leaves the full-height slot for the network card in a two-CPU chassis. PXE v2.1 and iSCSI boot cover boot paths, and FCoE traffic keeps converged Ethernet storage on the same 10G port pair. SR-IOV presents virtualized PCIe functions, and DCB carries priority flow control for loss-sensitive Ethernet classes.
UCSC-PCIE-B3SFP is offered new sealed and certified refurbished, with 30 days on every condition; terms apply. New sealed carries up to 3-year extended warranty, and certified refurbished carries up to 1 year. Cisco service ended on 31 December 2021, so ORM's warranty is the cover that applies. Certified refurbished units are inspected and bench-tested in a compatible host, and every port links at rated speed. Before the PO, match the C22 M3 slot plan and order the SFP+ optics or twinax cables. Regional stock and RMA with advance replacement cover UK, EU, US and MEA buyers; PO accepted and Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x 10G SFP+ |
Fits | UCS C22 M3 PCIe riser slot |
Lifecycle Status | Cisco service ended 31 December 2021 |
Replacement PID | N2XX-AIPCI01 / UCSC-PCIE-QNICSFP |
Form Factor | PCIe Card, Low Profile |
Ships Without | SFP+ optics or twinax cables |
A maintenance team keeping C22 M3 racks after Cisco service ended on 31 December 2021 needs a like-for-like 10G SFP+ spare. The slot, optics and firmware image already match the rack, so the PO should state UCSC-PCIE-B3SFP and the required SFP+ cable PIDs.
A technician replacing a failed Broadcom 57810 card needs the same 2-port 10G SFP+ PCIe form to preserve the cabling plan. The replacement order should carry the same PID, low-profile card height and any matching SFP-H10GB or SFP-10G link parts.
A two-CPU C22 M3 build without a PCIe RAID controller can carry up to two PCIe option cards. A one-CPU build can carry one. Before the PO, confirm CPU count, riser population and whether slot 2 is free on the running inventory.
Current Cisco service
Cisco service ended for UCSC-PCIE-B3SFP on 31 December 2021; replacement paths named for the card are N2XX-AIPCI01 and UCSC-PCIE-QNICSFP.
RJ-45 10GBASE-T cabling
UCSC-PCIE-B3SFP has SFP+ cages for 10G links; C22 M3 copper 10GBASE-T builds use UCSC-PCIE-BTG from the same option-card set.
8G Fibre Channel links
The DS-SFP-FC8G-SW module is not used with UCSC-PCIE-B3SFP; C22 M3 8Gb Fibre Channel builds use N2XX-AEPCI05 when the target is native FC storage.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSC-PCIE-B3SFP |  N20-AC0002 |  N2XX-AIPCI01 |  UCSC-MLOM-CSC-02 |  UCSC-PCIE-BD16GF | |
|---|---|---|---|---|---|
| Adapter Type | Ethernet Adapter | Virtual Interface Card | Ethernet Adapter | Virtual Interface Card | Fibre Channel HBA |
| Connector Type | SFP+ | Internal | SFP+ | SFP+ | LC |
| Data Rate | 10G | 10G | 10G | 10G | 16G FC |
| Form Factor | PCIe Card | Mezzanine | PCIe Card | mLOM | PCIe Card |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSC-PCIE-B3SFP is the BROADCOM 57810 10Gb A-FEX SFP+ Ethernet Adapter for UCS C-Series servers. The model name is Broadcom 57810. The UCSC-PCIE prefix marks a UCS C-Series PCIe card, B3SFP marks the Broadcom 57810 SFP+ form, UCSC-PCIE-B3SFP= is the spare, and UCSC-PCIE-B3SFP-RF is Cisco-remanufactured.
UCSC-PCIE-B3SFP fits UCS C22 M3 in PCIe riser slot 1 or slot 2. One-CPU C22 M3 builds expose one usable PCIe option-card position. Two-CPU C22 M3 builds expose two, unless a PCIe RAID controller reserves one position.
A UCS C22 M3 uses UCSC-PCIE-B3SFP when the build needs Broadcom 57810 10G SFP+ ports. Other C22 M3 Ethernet or converged choices are UCSC-PCIE-CSC-02, UCSC-PCIE-C10T-02, UCSC-PCIE-C40Q-02, UCSC-PCIE-ESFP, UCSC-PCIE-Q8362, N2XX-ABPCI01-M3, N2XX-ABPCI03-M3, UCSC-PCIE-BTG, N2XX-AIPCI01, UCSC-PCIE-IRJ45 and UCSC-PCIE-ITG.
UCSC-PCIE-B3SFP has 2 x 10G SFP+ ports, a PCIe 3.0 x8 host interface, a Broadcom BCM57810S controller, low-profile card height and Ethernet/FCoE capability. The C22 M3 option set places the card in either riser slot and uses separately ordered SFP+ optics or twinax cables.
UCSC-PCIE-B3SFP provides two 10G SFP+ Ethernet ports. The far end must be a 10G SFP+ switch or fabric port, and each link needs a matching Cisco twinax cable or SFP-10G-SR or SFP-10G-LR optic.
UCSC-PCIE-B3SFP uses SFP-H10GB-CU1M, SFP-H10GB-CU3M, SFP-H10GB-CU5M, SFP-H10GB-ACU7M, SFP-H10GB-ACU10M, SFP-10G-SR and SFP-10G-LR on C22 M3. Order one or two per adapter, based on one-port or dual-port network attachment. DS-SFP-FC8G-SW is not used with this adapter.
UCSC-PCIE-B3SFP fits slot 1 or slot 2 in UCS C22 M3. One-CPU C22 M3 builds take one PCIe option card, two-CPU builds take two, and a PCIe RAID controller leaves one additional option-card position in a two-CPU build.
UCSC-PCIE-B3SFP carries Ethernet and FCoE on the same 10G SFP+ ports. Broadcom BCM57810S functions are TOE, iSCSI, FCoE, SR-IOV, DCB, PXE v2.1, iSCSI boot and RDMA over TCP, so the host driver stack must match those services.
UCSC-PCIE-B3SFP is the base card PID, UCSC-PCIE-B3SFP= is the spare order form, and UCSC-PCIE-B3SFP-RF is Cisco-remanufactured. Certified refurbished is an ORM condition, not the Cisco-remanufactured PID, so the PO should state the exact form and condition.
The replacements for UCSC-PCIE-B3SFP are N2XX-AIPCI01 and UCSC-PCIE-QNICSFP. N2XX-AIPCI01 changes to Intel X520 dual-port 10Gb SFP+, and UCSC-PCIE-QNICSFP changes to Qlogic QLE8442 dual-port 10Gb SFP+ NIC. Before the PO, confirm the C22 M3 option-card line because a successor PID still needs a host fit.
UCSC-PCIE-B3SFP uses Broadcom 57810 with TOE, iSCSI and FCoE, while N2XX-AIPCI01 is an Intel X520 dual-port 10Gb SFP+ adapter. Choose UCSC-PCIE-B3SFP for a like-for-like Broadcom A-FEX replacement and N2XX-AIPCI01 where the migration path names Intel X520.
UCSC-PCIE-B3SFP is Broadcom 57810 10Gb A-FEX SFP+, while UCSC-PCIE-QNICSFP is a Qlogic QLE8442 dual-port 10Gb SFP+ NIC. Choose UCSC-PCIE-B3SFP for an exact C22 M3 spare and UCSC-PCIE-QNICSFP when the PO is for the Qlogic replacement path.
Cisco stopped selling UCSC-PCIE-B3SFP on 31 December 2016. Cisco service ended on 31 December 2021. The C22 M3 host stopped selling on 1 May 2015, and Cisco service for the host ended on 30 April 2020.
ORM Systems offers UCSC-PCIE-B3SFP as new sealed or certified refurbished, with 30 days on every condition; terms apply. Cisco service ended on 31 December 2021, so ORM's warranty is the cover that applies. New sealed carries up to 3-year extended warranty, and certified refurbished carries up to 1 year.
United States
