Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$246.75
Quantity:
UCSC-PCIE-ID25GF
Cisco UCSC-PCIE-ID25GF Intel XXV710-DA2 2-Port 25G SFP28 PCI...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSC-PCIE-ID25GF is the Intel XXV710-DA2 2-port 25G SFP28 PCIe Ethernet adapter for UCS C220 M5, UCS C240 M5, UCS C480 M5, UCS S3260 M5 and UCS C125 M5. This Cisco UCS C220 M5 network adapter occupies an x8 PCIe path and connects server ports to SFP28 optics or direct-attach copper. C220 M5 systems place the card in Riser 1 or 2; C125 M5 nodes take the HHHL x8 PCIe card. Intel Ethernet Network Adapter XXV710 traffic is Ethernet only, so the far end must be a matching Ethernet SFP28 switch port. UCSC-PCIE-QD25GF is the same port-count sibling with a Qlogic QL41212H controller. That choice suits Qlogic controller standardization on the same port count.
UCSC-PCIE-ID25GF price for new stock is $96.37. UCSC-PCIE-ID25GF refurb price is $246.75. UCSC-PCIE-ID25GF is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for UCSC-PCIE-ID25GF for additional pricing. Browse the full Cisco UCS Intel X710 Network Adapters series or explore all Cisco products.
2 SFP28 cages carry 25/10GbE over optical media and DAC, plus 1GbE over optical media. PCIe 3.0 x8 is the host interface, so the server needs an x8 electrical slot. 8.6 W typical and 11.8 W maximum apply with 25GBASE-CR-L; 10.3 W typical and 14.1 W maximum apply with 25GBASE-SR. UCSC-PCIE-ID25GF uses the Intel Ethernet Controller XL710-BM2. SR-IOV provides 128 functions per device and 64 functions per port, and VMDq provides 256 VMs. Network virtualization offloads cover VxLAN, GENEVE, NVGRE, MPLS and VxLAN-GPE with NSH. PXE and UEFI boot support are present for LAN boot planning. 0°C to 55°C operating temperature sets the chassis airflow check. SR optics need 250 LFM airflow at 55°C; CR DAC needs 100 LFM airflow at 55°C. 167 mm depth and 69 mm height fit an HHHL PCIe bay.
UCSC-PCIE-ID25GF is offered as new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; every port links at rated speed and optics bay recognition is checked. Order SFP28 optics or DACs per port; 2 m, 3 m and 5 m 25G DACs need RS-FEC. Cisco stopped selling UCSC-PCIE-ID25GF on 3 February 2025. Warranty runs up to 3-year extended on new and up to 1 year on certified refurbished, with 30 days on every condition. UK, EU, US and MEA stock/RMA, RMA with advance replacement, PO accepted and Net-30 for government apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 2 x 1/10/25G SFP28 |
Fits | UCS C220 M5, C240 M5, C480 M5 |
Lifecycle Status | End of sale passed 3 February 2025 |
Form Factor | PCIe 3.0 x8 HHHL |
Technology | Ethernet |
Controller | Intel Ethernet Controller XL710-BM2 |
A C220 M5 operator with a failed 25G SFP28 PCIe NIC keeps the same Riser 1 or 2 slot, x8 electrical path and HHHL card height. The replacement keeps the Intel XXV710-DA2 controller and existing SFP28 cabling plan. Before the PO, confirm the riser and cable PIDs on the chassis inventory.
A C125 M5 node build that needs two 25GbE ports can use the HHHL x8 PCIe option rather than an OCP bay. UCSC-PCIE-ID25GF keeps the PCIe slot separate from UCSC-O-ID25GF OCP 2.0 choices. Before the PO, confirm the node slot plan and airflow for SR optics.
A rack server moving from 10GbE uplinks to 25GbE keeps the same dual-port Ethernet layout while the far end moves to 25GbE SFP28 switch ports. The cable choice sets the FEC check because 2 m, 3 m and 5 m 25G DACs need RS-FEC. Specify each cable PID before the PO.
C125 M5 OCP bay
UCSC-PCIE-ID25GF is an HHHL PCIe card, not an OCP module. A C125 M5 OCP 2.0 25G requirement takes UCSC-O-ID25GF.
100 GbE uplinks
UCSC-PCIE-ID25GF tops out at 25 Gbps per port. C220 M5 Riser 1 or 2 accepts UCSC-P-M5D100GF for 2 x 100GbE QSFP PCIe.
Four 10/25G ports
UCSC-PCIE-ID25GF has two SFP28 cages. A C220 M5 four-port 10/25G SFP28 PCIe VIC requirement takes UCSC-PCIE-C25Q-04.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSC-PCIE-ID25GF |  UCSC-PCIE-ID10GF |  UCSC-P-ID10GC |  UCSC-P-IQ10GC |  UCSC-PCIE-IQ10GF | |
|---|---|---|---|---|---|
| Adapter Type | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter |
| Connector Type | SFP28 | SFP+ | RJ-45 | RJ-45 | SFP+ |
| Data Rate | 25G | 10G | 10G | 10G | 10G |
| Form Factor | PCIe Card | PCIe Card | PCIe Card | PCIe Card | PCIe Card |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSC-PCIE-ID25GF is the Intel XXV710-DA2 10-dual-port 25G NIC, also named the Intel Ethernet Network Adapter XXV710. PCIE marks the PCIe form; ID25GF separates this Intel dual-port 25G SFP28 card from OCP and VIC forms. UCSC-PCIE-ID25GF= is the spare adapter, and UCSC-PCIEID25GF-RF is Cisco Refresh remanufactured.
UCSC-PCIE-ID25GF fits UCS C220 M5, UCS C240 M5, UCS C480 M5, UCS S3260 M5 and UCS C125 M5 server nodes. C220 M5 uses Riser 1 or 2 with x8 electrical slot and HHHL card height. C125 M5 uses an HHHL x8 PCIe placement.
UCSC-PCIE-ID25GF is the C220 M5 Intel dual-port 25G SFP28 option. The same C220 M5 Ethernet option set also contains UCSC-PCIE-ID10GF, UCSC-PCIE-IQ10GF, UCSC-PCIE-IQ10GC, UCSC-PCIE-QD25GF, UCSC-P-M4D25GF, UCSC-P-M5D25GF, UCSC-PCIE-QD40GF, UCSC-PCIE-ID40GF, UCSC-PCIE-QS100GF, UCSC-P-M5D100GF and UCSC-P-M5S100GF.
UCSC-PCIE-ID25GF is a dual SFP28 PCIe 3.0 x8 adapter with 25/10/1GbE optical speed and 25/10GbE DAC speed. Power is 8.6 W typical and 11.8 W maximum with 25GBASE-CR-L, or 10.3 W typical and 14.1 W maximum with 25GBASE-SR. The card measures 167 mm depth and 69 mm height.
UCSC-PCIE-ID25GF provides two SFP28 cages. Optical media runs at 1GbE, 10GbE or 25GbE per port, and direct attach runs at 10GbE or 25GbE per port. The far-end switch port must match the chosen optic or cable speed, and 25G DACs at 2 m, 3 m and 5 m need RS-FEC.
UCSC-PCIE-ID25GF works with SFP-25G-AOC10M, SFP-H25G-CU1M, SFP-H25G-CU2M, SFP-H25G-CU3M, SFP-H25G-CU5M, SFP-10/25G-CSR-S, SFP-25G-SR-S and SFP-10/25G-LR-S at 25G. 10G choices are SFP-H10GB-CU1M, SFP-H10GB-CU3M, SFP-H10GB-CU5M, SFP-10G-AOC7M, SFP-10G-SR-S, SFP-10G-LR and SFP-10G-SR.
UCSC-PCIE-ID25GF uses Riser 1 or 2 in a UCS C220 M5 with an x8 electrical slot and HHHL card height. A UCS C125 M5 node uses an HHHL x8 PCIe placement. Before the PO, confirm the riser or PCIe bay on the chassis label or running inventory.
UCSC-PCIE-ID25GF follows the UCS Manager adapter floor of 3.2(3a) on 6200, 6332 and 6332-16UP paths, 4.0(1a) on UCS 6454, and 4.1(1a) on UCS 64108. The C220 M5, C240 M5, C480 M5, C125 M5 and S3260 M5 host bundle target is 4.2(3s) recommended.
UCSC-PCIE-ID25GF has VxLAN, GENEVE, NVGRE, MPLS and VxLAN-GPE with NSH offloads, plus SR-IOV, VMDq, DDP, DPDK, Flow Director and checksum offload. SR-IOV provides 128 functions per device and 64 functions per port. PXE and UEFI are present for LAN boot planning.
UCSC-PCIE-ID25GF is the server-installed product ID. UCSC-PCIE-ID25GF= is the spare adapter form. UCSC-PCIEID25GF-RF is Cisco Refresh remanufactured and is separate from ORM certified refurbished condition. The base PID is the form to match when replacing an installed C-Series or S-Series XXV710-DA2 card.
UCSC-O-ID25GF is the OCP 2.0 Intel XXV710DA2OCP1 adapter; UCSC-PCIE-ID25GF is the PCIe 3.0 x8 HHHL adapter. The PCIe card suits C220 M5, C240 M5, C480 M5, S3260 M5 and C125 M5 PCIe slots; the OCP code suits C125 M5 OCP ordering.
UCSC-PCIE-QD25GF uses Qlogic QL41212H dual-port 25GbE silicon, while UCSC-PCIE-ID25GF uses Intel Ethernet Controller XL710-BM2. Both use Riser 1 or 2 x8 HHHL placement on C220 M5. Choose by driver stack, existing spares and controller standard before the PO.
UCSC-P-I8D25GF is an Intel E810XXVDA2 2x25/10 GbE SFP PCIe NIC with PCIe 4.0 x8; UCSC-PCIE-ID25GF is Intel XXV710-DA2 with PCIe 3.0 x8. Choose UCSC-PCIE-ID25GF for the C220 M5, C240 M5, C480 M5 or S3260 M5 host set already using XXV710.
Cisco stopped selling UCSC-PCIE-ID25GF on 3 February 2025, and Cisco service ends on 28 February 2030. There is currently no migration product available for this product. UCSC-PCIE-ID25GF serves UCS C220 M5, UCS C240 M5, UCS C480 M5, UCS S3260 M5 and UCS C125 M5.
ORM offers UCSC-PCIE-ID25GF as new sealed and certified refurbished. New units carry up to 3-year extended warranty, certified refurbished units carry up to 1 year, and every condition carries 30-day returns, terms apply. Cisco service ends 28 February 2030. PO accepted, Net-30 for government and RMA with advance replacement apply.
United States
