Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$267.30
$257.253.8% off
Quantity:
UCSC-PCIE-IQ10GF
Cisco UCSC-PCIE-IQ10GF Intel X710-DA4 4-Port 10G SFP+ PCIe N...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSC-PCIE-IQ10GF is the Cisco C-Series Intel X710-DA4 Ethernet adapter with four 10G SFP+ cages on a PCIe 3.0 x8 low-profile card for UCS C220 M6 and C240 M6 servers. Optical ports run 1 Gbps or 10 Gbps; direct-attach copper runs 10 Gbps, so each far end must match the chosen SFP+ optic or DAC. The Cisco UCS C220 M6 network adapter fits Riser 1, 2 or 3 as an HHHL single-slot card. It also fits C225 M6, C245 M6, C220 M5, C240 M5, C480 M5 and S3260 M5. UCSC-PCIE-ID10GF is the dual-port X710-DA2 sibling for two 10G SFP+ links. M7 rack servers use D-coded X710 spares instead.
UCSC-PCIE-IQ10GF price for new stock is is available on request. Get immediate quote. UCSC-PCIE-IQ10GF refurb price is $257.25.
Request bulk order quote for UCSC-PCIE-IQ10GF for additional pricing. Browse the full Cisco UCS Intel X710 Network Adapters series or explore all Cisco products.
Four external SFP+ cages provide Ethernet links for 10GBASE-SR, 10GBASE-LR and 10GbE SFP+ DAC media. 1 Gbps optical links and 10 Gbps optical links use the optical personality; direct attach stays at 10 Gbps per port. 256 VMDq VMs and 128 SR-IOV virtual functions per device provide the virtualization limit to size in the hypervisor plan. UCSC-PCIE-IQ10GF uses the Intel Ethernet Controller XL710-BM1 on the quad-port model. VxLAN, GENEVE, NVGRE, MPLS, VxLAN-GPE with NSH, checksum offload, DDP, DPDK and Intel Ethernet Flow Director are the named offloads and traffic features. 10GBASE-LR operation is 6.9 W typical and 7.4 W maximum; direct attach is 3.6 W typical and 3.8 W maximum. 0°C to 55°C operating temperature, 167 mm depth and 69 mm height set the chassis checks.
UCSC-PCIE-IQ10GF is offered new sealed and certified refurbished, with 30 days on every condition and terms apply. New sealed carries up to 3-year extended warranty; certified refurbished carries up to 1 year. Certified refurbished units are inspected and bench-tested in a compatible host, with every port links at rated speed. Order the SFP-H10GB-CU1M, SFP-H10GB-CU3M, SFP-H10GB-CU5M, SFP-10G-AOC7M, SFP-10G-SR-S, SFP-10G-LR or SFP-10G-SR path that matches the switch port. Regional stock and RMA with advance replacement cover UK, EU, US and MEA; PO accepted and Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x 10G SFP+ |
Fits | UCS C220 M6, C240 M6, C225 M6 |
Form Factor | PCIe 3.0 x8, low profile |
Technology | Ethernet |
Controller | Intel Ethernet Controller XL710-BM1 |
Ships Without | SFP+ optics and DACs |
A C220 M6 server with a failed quad-port 10G SFP+ path needs the same PCIe 3.0 x8 low-profile adapter to preserve cabling and switch ports. Specify UCSC-PCIE-IQ10GF for Riser 1, 2, or 3, then match the SFP+ optic or DAC before the PO.
A two-socket C220 M6 expansion can add one, two, or three PCIe option cards across Risers 1, 2, and 3. UCSC-PCIE-IQ10GF adds four SFP+ Ethernet ports per card. Before the PO, confirm the CPU count and riser layout on the chassis label or the running inventory.
A mixed M5 and M6 UCS rack pool can hold one quad-port 10G SFP+ spare for C220 M6, C240 M6, C225 M6, C245 M6, C220 M5, C240 M5, C480 M5 and S3260 M5. Specify the spare adapter form and keep matching SFP+ optics or DACs with the pool.
UCS C220 M7 base code
UCS C220 M7 uses UCSC-PCIEIQ10GF-D in Riser 1, 2, or 3 for the same X710 quad-port 10G SFP+ role; do not use the M5/M6 spare code.
25G SFP28 uplinks
UCS C220 M6 offers UCSC-P-I8Q25GF for four 25/10 GbE SFP28 ports. UCSC-PCIE-IQ10GF stays at 10 Gbps per SFP+ port.
Copper RJ45 cabling
UCS C220 M6 offers UCSC-P-IQ10GC for four 10GbE RJ45 ports. UCSC-PCIE-IQ10GF uses SFP+ cages for optics or DACs.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSC-PCIE-IQ10GF |  UCSC-PCIE-ID10GF |  UCSC-PCIE-ID25GF |  UCSC-P-IQ10GC |  UCSC-P-ID10GC | |
|---|---|---|---|---|---|
| Adapter Type | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter |
| Connector Type | SFP+ | SFP+ | SFP28 | RJ-45 | RJ-45 |
| Data Rate | 10G | 10G | 25G | 10G | 10G |
| Form Factor | PCIe Card | PCIe Card | PCIe Card | PCIe Card | PCIe Card |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSC-PCIE-IQ10GF is the Cisco configured PID for the Intel X710-DA4 quad-port 10G SFP+ PCIe Ethernet adapter. The IQ segment marks the quad-port Intel SFP+ member of the C-Series adapter set. UCSC-PCIE-IQ10GF= is the spare form, and UCSC-PCIEIQ10GF-RF is the Cisco-remanufactured form.
UCSC-PCIE-IQ10GF fits UCS C220 M6, C240 M6, C225 M6, C245 M6, C220 M5, C240 M5, C480 M5 and S3260 M5. UCS C220 M7 and C240 M7 use UCSC-PCIEIQ10GF-D for the same quad-port X710 SFP+ role.
A UCS C220 M6 uses UCSC-PCIE-IQ10GF for quad-port 10G SFP+ Ethernet in Riser 1, 2, or 3. The same 10G rack-server table also gives UCSC-PCIE-ID10GF for two SFP+ ports, UCSC-P-ID10GC for two RJ45 ports and UCSC-P-IQ10GC for four RJ45 ports.
UCSC-PCIE-IQ10GF has four SFP+ cages, 10 Gbps direct-attach speed, 1 Gbps or 10 Gbps optical speed, a PCIe 3.0 x8 host interface, 6.9 W typical and 7.4 W maximum power with 10GBASE-LR, 69 mm height and 167 mm depth.
UCSC-PCIE-IQ10GF provides four external SFP+ Ethernet ports. Optical operation is 1 Gbps or 10 Gbps, and direct-attach copper operation is 10 Gbps. The switch port must match the selected SFP+ optic or DAC speed and media type.
UCSC-PCIE-IQ10GF works with SFP-H10GB-CU1M, SFP-H10GB-CU3M, SFP-H10GB-CU5M, SFP-10G-AOC7M, SFP-10G-SR-S, SFP-10G-LR and SFP-10G-SR. Use DAC PIDs for short copper runs, AOC for a 7-meter active optical run, and SR or LR optics for fiber.
UCSC-PCIE-IQ10GF uses Riser 1, 2, or 3 in a UCS C220 M6 as an HHHL single-slot card. A one-CPU C220 M6 has no Riser 3. A two-CPU C220 M6 exposes Risers 1, 2 and 3 for PCIe option cards.
UCSC-PCIE-IQ10GF appears in UCS rack server firmware release 6.0(2) with firmware ID 0x800101A7-1.839.1-9.56. UCS C220 M6 options are available for Intersight Managed Mode, UCSM Managed Mode and standalone operation, so the management path follows the server mode.
UCSC-PCIE-IQ10GF is the configured adapter PID, UCSC-PCIE-IQ10GF= is the spare adapter PID, and UCSC-PCIEIQ10GF-RF is the Cisco-remanufactured PID. Cisco-remanufactured status is separate from ORM certified refurbished condition, which is inspected and bench-tested in a compatible host.
UCSC-PCIE-IQ10GF has four 10G SFP+ ports, while UCSC-PCIE-ID10GF has two 10G SFP+ ports. Choose UCSC-PCIE-IQ10GF when the server needs four switch-facing SFP+ links. Choose UCSC-PCIE-ID10GF when two SFP+ links match the cabling plan.
UCSC-PCIE-IQ10GF uses four 10G SFP+ cages for optics or DACs, while UCSC-PCIE-IQ10GC uses four 10GBase-T RJ45 ports. Choose UCSC-PCIE-IQ10GF for fiber or Twinax cabling. Choose UCSC-PCIE-IQ10GC for copper RJ45 cabling in the same 10G role.
UCSC-PCIE-IQ10GF is a four-port 10G SFP+ PCIe adapter, while UCSC-P-I8Q25GF is a four-port 25/10 GbE SFP28 PCIe adapter in UCS C220 M6. Choose UCSC-PCIE-IQ10GF for 10G SFP+ networks. Choose UCSC-P-I8Q25GF for 25G SFP28 uplinks.
Cisco has not announced an end-of-sale date for UCSC-PCIE-IQ10GF. The adapter serves UCS C-Series M5 and M6 rack servers and the UCS S3260 M5 storage server, while current UCS C220 M7 and C240 M7 ordering uses the separate UCSC-PCIEIQ10GF-D code.
ORM offers UCSC-PCIE-IQ10GF new sealed and certified refurbished. New sealed carries up to 3-year extended warranty, certified refurbished carries up to 1 year, and 30 days on every condition with terms apply. Certified refurbished units are inspected and bench-tested in a compatible host.
United States
