Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
UCSC-P-IQ10GC
Cisco UCSC-P-IQ10GC Intel X710T4LG 4-Port 10G RJ45 PCIe Ethe...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSC-P-IQ10GC is a Cisco-Intel X710T4LG Ethernet Adapter with four 10GBASE-T RJ45 ports on a PCIe 3.0 x8 card for UCS C-Series M6 rack servers. The adapter fits UCS C220 M6, C225 M6, C240 M6 and C245 M6 riser positions 1, 2 or 3. A Cisco UCS C220 M6 network adapter order uses riser 1 or riser 2 in one-CPU builds, and riser 3 joins in two-CPU builds. Ethernet traffic lands on RJ45 copper switch ports at the matched port speed. C225 M6 and C245 M6 reserve the mLOM/OCP bay for OCP adapters, so this plain configuration stays in the rear PCIe riser plan. UCSC-P-ID10GC is the two-port RJ45 sibling for the same M6 risers when the server needs fewer copper uplinks.
UCSC-P-IQ10GC price is is available on request. Get immediate quote.
Request bulk order quote for UCSC-P-IQ10GC for additional pricing. Browse the full Cisco UCS Intel X710 Network Adapters series or explore all Cisco products.
100M/1/2.5/5/10GbE per port gives the buyer a multi-speed copper handoff to Category 5e, Category 6 or Category 6A cabling up to 100 m. PCIe 3.0 x8 at 8.0 GT/s is the host interface to match in the server inventory. Intel Ethernet Controller X710-TM4 provides VT-c, SR-IOV, VMDq, Flexible Port Partitioning, Intel Data Direct I/O, intelligent offloads, iSCSI and NFS storage over Ethernet. Low Profile and Full Height brackets cover the bracket options for mixed riser service spares. iWARP/RDMA is No for the Intel adapter, so storage planning should use Ethernet and storage-over-Ethernet features rather than an RDMA design. UCSC-P-IQ10GC is managed under Intersight Managed Mode, UCSM Managed Mode or Standalone configurations in the M6 host. HHHL, single-slot card sizing keeps the adapter in the option-card class named in each host build.
UCSC-P-IQ10GC is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; the board, connector and bracket are inspected, recognized by a compatible host, and every port links at rated speed. Order the PCIe card for the M6 riser plan and match RJ45 cabling to the switch speed. Warranty is up to 3-year extended on new and up to 1 year on certified refurbished, with 30 days returns on every condition; terms apply. Regional stock/RMA covers UK, EU, US and MEA, with RMA with advance replacement, PO accepted and Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Ports | 4 x 10GBASE-T RJ45 |
Fits | UCS C220/C225/C240/C245 M6 |
Form Factor | PCIe Card, riser 1, 2, or 3 |
Technology | Ethernet, copper 10GBASE-T |
Controller | Intel Ethernet Controller X710-TM4 |
A buyer replacing a failed copper NIC in a UCS C220 M6, C225 M6, C240 M6 or C245 M6 must match the Cisco-Intel X710T4LG adapter and the riser position. Before the PO, confirm riser 1, 2 or 3 and the M6 generation on the chassis label or running inventory.
A team adding RJ45 uplinks to an M6 rack server uses the rear PCIe risers rather than the mLOM/OCP bay. C220 M6 one-CPU builds use riser 1 and riser 2 only; two-CPU builds add riser 3. Specify the CPU count and riser count before the PO.
An operations team connecting standalone C-Series M6 servers to copper access switches needs each port matched to 100M, 1G, 2.5G, 5G or 10G switch settings and cabling. Use Category 5e, Category 6 or Category 6A RJ45 cabling up to 100 m, then check link speed before the PO.
OCP 3.0 bay
UCS C225 M6 and UCS C245 M6 mLOM/OCP 3.0 bays take UCSC-O-ID10GC for 2x10GBASE-T; UCSC-P-IQ10GC is the PCIe riser card.
One-CPU C220 riser 3
C220 M6 one-CPU systems do not install riser 3; use riser 1 or riser 2 for UCSC-P-IQ10GC, or specify two CPUs for all three risers.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSC-P-IQ10GC |  UCSC-PCIE-IQ10GF |  UCSC-PCIE-ID10GF |  UCSC-PCIE-ID25GF |  UCSC-P-ID10GC | |
|---|---|---|---|---|---|
| Adapter Type | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter | Ethernet Adapter |
| Connector Type | RJ-45 | SFP+ | SFP+ | SFP28 | RJ-45 |
| Data Rate | 10G | 10G | 10G | 25G | 10G |
| Form Factor | PCIe Card | PCIe Card | PCIe Card | PCIe Card | PCIe Card |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSC-P-IQ10GC is the Cisco-Intel X710T4LG 4x10 GbE RJ45 PCIe NIC for UCS C-Series M6 rack servers. The model is the Intel X710T4LG, and the base PID names the four-port 10GBASE-T copper PCIe form.
UCSC-P-IQ10GC fits UCS C220 M6, UCS C225 M6, UCS C240 M6 and UCS C245 M6. The adapter installs in riser 1, 2 or 3 as an HHHL single-slot PCIe card. C220 M6 one-CPU builds do not install riser 3.
For 10 GbE Ethernet, UCS C220 M6 uses UCSC-P-IQ10GC for four RJ45 ports, UCSC-P-ID10GC for two RJ45 ports, UCSC-PCIE-IQ10GF for four SFP+ ports, and UCSC-PCIE-ID10GF for two SFP+ ports. Riser 1, 2, or 3 carries these PCIe NICs.
UCSC-P-IQ10GC has four 100M/1/2.5/5/10GbE RJ45 ports, a PCIe 3.0 x8 host interface at 8.0 GT/s, and Low Profile and Full Height bracket options. The card is HHHL and single-slot in M6 riser positions 1, 2 or 3.
UCSC-P-IQ10GC provides four RJ45 copper ports with 100M, 1G, 2.5G, 5G and 10G Ethernet rates. The far-end switch port and cabling must match the intended speed; Category 5e, Category 6 and Category 6A cabling are the copper media choices up to 100 m.
UCSC-P-IQ10GC installs in riser 1, 2 or 3 on UCS C220 M6, C225 M6, C240 M6 and C245 M6. C220 M6 one-CPU systems use riser 1 and riser 2; C220 M6 two-CPU systems add riser 3.
UCSC-P-IQ10GC sits in Intersight Managed Mode, UCSM Managed Mode and Standalone configurations on the M6 hosts. Before the PO, confirm the management mode and riser inventory on the chassis label or the running inventory.
UCSC-P-IQ10GC uses the Intel Ethernet Controller X710-TM4 with VT-c, SR-IOV, VMDq, Flexible Port Partitioning, on-chip QoS and traffic management, Intel Data Direct I/O and intelligent offloads. These features belong to the Intel X710-T4L adapter family used by the Cisco-Intel X710T4LG card.
No, iWARP/RDMA is No for the Intel X710-T4L. UCSC-P-IQ10GC still carries Ethernet storage features through iSCSI and NFS, so storage design should stay with Ethernet and storage-over-Ethernet paths rather than an RDMA fabric.
UCSC-P-IQ10GC has four RJ45 10GBASE-T ports, while UCSC-P-ID10GC has two RJ45 10GBASE-T ports. Both are Cisco-Intel X710T copper PCIe adapters for the same M6 riser positions. Choose UCSC-P-IQ10GC when the server needs twice the copper port count.
UCSC-P-IQ10GC is the four-port RJ45 copper card, while UCSC-PCIE-IQ10GF is the four-port 10G SFP+ card. The copper card suits 10GBASE-T switch ports and Category cabling; the SFP+ card suits optical or DAC designs.
Cisco has not announced an end-of-sale date for UCSC-P-IQ10GC. UCSC-P-IQ10GC serves UCS C-Series M6 rack servers: UCS C220 M6, UCS C225 M6, UCS C240 M6 and UCS C245 M6.
ORM offers UCSC-P-IQ10GC new sealed and certified refurbished, with warranty up to 3-year extended on new and up to 1 year on certified refurbished. Returns are 30 days on every condition; terms apply. PO accepted, Net-30 for government, and RMA with advance replacement apply.
United States
